Awesome, I'm ready to get that pre order in as soon as its addedI’ll add a sku for 340mm. It’ll give you some good slack to route it as needed.
Awesome, I'm ready to get that pre order in as soon as its addedI’ll add a sku for 340mm. It’ll give you some good slack to route it as needed.
75W total is the recommended max. I will have to fix that discrepency.Just noticed that the product page for the CPU power cable here says that it can deliver up to 100W with GPU? Is that true or is it still limited to the 75W that's listed on main M2426 product page?
75W total is the recommended max. I will have to fix that discrepency.
I ask the same question ? As mxj1, I will soon receive my Winter One.Any word on when the next batch will be going out?
Correct.Hey guys quick question before i take apart my T1 install this m2426.
It doesn’t matter which side i plug from the psu to the board right?
Seemingly dummy proof if I’m looking at it with it laid out in front of me but wanted to be sure.
1. The 6+2 pin gpu cable you ordered is for Corsair SF series gpu. You cannot mix and match it with hdplex.So I've just got my M2426 installed, which I'm hella chipper about. As usual for novice builders, I've a couple of questions:
- The 8-pin to 6+2-pin GPU cable I received has a slightly different pin layout to the PSU (HDPlex 400w Rev 2.1) and to the 8-pin on the GPU (RTX 3060 Ti). It seems to fit (bevelled male end where the female end has a square hole) but I also note the missing pin seems to be in a different position (images attached). Is this gonna be an issue?
- The CPU cable I ordered has a 4-pin output (ATX12V?) but my mobo has an EATX12V 8-pin. I can't see an option on the store for an 8-pin output, is that because it's incompatible with the M2426's passthrough?
- The SATA output on the M2426 is designed to hook up an SSD, correct?
Thanks for the reply. Do you sell a GPU cable that would work? I need to get a SATA cable anyway because I forgot to order one so if you've got one available that'd be handy because I could grab both in one order.1. The 6+2 pin gpu cable you ordered is for Corsair SF series gpu. You cannot mix and match it with hdplex.
2. You can use a 4 pin in the 8 pin. Just be wary of the 75W limit.
3. yes, SSD or whatever, up to 3A.
Finally got my M2426, is that loose pin normal?