Power Supply HDPLEX 400W DC-ATX

[cj360]

Are they even manufactured anymore? Both Amazon and Ebay had listings that said no stock.

 

[Reldey]

Maybe I should just get a modded brick from @guryhwa ...

 

[MarcParis]

Maybe I should just get a modded brick from @guryhwa ...

True, could be the best solution

 

[CubanLegend]

Maybe I should just get a modded brick from @guryhwa ...

Get one of those watt detector thingies from Amazon to verify how much your system is pulling from the wall? just to be sure?

 

[Reldey]

Get one of those watt detector thingies from Amazon to verify how much your system is pulling from the wall? just to be sure?

Yup ordered one of those too. Should be in today.

 

[badaaim]

I received mine today, living in England. Thought it might be of information. Looks really good.

 

[MarcParis]

Worst case, just use external sfx psu like i did.. (look at my signature s4 mini..))

 

[Craxas]

I thought gury couldnt mod the bricks to work with the hdplex + 7.5mmX5mm higher than 330w? Hes mentioned it takes another plug to do so.

 

[SkudShark]

Where are folks finding these HP units? My Google-Fu is weak with this one.

 

[MarcParis]

Where are folks finding these HP units? My Google-Fu is weak with this one.

Look for voodoo 350w...but, please be aware that all these psu are not produced currently..that's why they are quite hard to find.

I've found mine on ebay

 

[DocH]

Got mine from a guy over at hardforum. Bought a nfc S4 mini, hd Plex 250w and the voodoo for $250.

Model number to help your search

HP20V17.5A-VooDoo

 

[Reldey]

So I got a Kill a Watt and hooked my system up to it today with the Corsair SF600. With all the stress testing I could muster, i didn't see the readout go over 260 watts. So I am thinking the brick might be bad, new one comes in tomorrow and we will see. If that doesn't work, maybe my HDPlex is bad, but I doubt it.

 

[MarcParis]

Be careful, generally a power peak cannot be caught by kill o watt..

 

[Reldey]

Be careful, generally a power peak cannot be caught by kill o watt..

Yes true... we will see. There were a few system builds similar to mine that used the dell brick, so I didn't think it would be much of an issue. I'll keep testing...

 

[Kmpkt]

To give you another example on the difference between a Kill-A-Watt readout and an known peak, running a 7700K and 1080 stress test on the HDPlex 300W AC-DC had a peak reading of 305W from the wall but I repeatedly ran into OCP at 400W.

 

[ryzen]

Any other adapter for HDplex 400w to power a 1080Ti + 7700k besides HP Voodoo?

 

[Kmpkt]

Not sure anything out there is actually going to power that combo cleanly. Even the 350W Voodoo is tight and there's really nothing above that unless you want to go with the Eurocom 780W adapter.

 

[ryzen]

Not sure anything out there is actually going to power that combo cleanly. Even the 350W Voodoo is tight and there's really nothing above that unless you want to go with the Eurocom 780W adapter.

Aww bummer. I guess the only way is to go with gurywa's modded psu?

 

[Kmpkt]

Yeah that's about it for now. Hopefully in the not too distant future you'll be able to chain two HDPlex 300W units together into a 600W brick.

 

[Craxas]

@guryhwa can you make a 400w adapter that works with the hdplex 7.5mm×5.0mm plug? Theres a couple of customers here