How do you connect both quadro and flow 200? Some internal usb splitter or with aquabus?At the end, It just works! The fastest and cheapest way to have a DDC in the T1!
What was the final choice for fan, description says F12 but looks like A12.
What was the final choice for fan, description says F12 but looks like A12.
Does anyone know what time they're launching sales on June 20th?
I don't recall any official statement saying anything about sales starting on 6/20. Where are you getting that?
I'm guessing that you've mixed up the announcement where Wahaha said he expects a batch to come through
The only reason I say that with confidence is that we were told we'd have at least two days advanced notice about a sale (source). It's EOB Pacific time today on 6/18 (and I believe Wahaha is in TW or somewhere else in Asia, so more like morning of 6/19 where he is) and no update on sales starting yet.
So I'd say hold your horses and don't set your expectations (or those of others) on misinterpreted info
I do not know maybe someone missed it..
but look at this beauty !!
smallformfactor.net
but look at this beauty !!
FormD T1 - 9.5L with UNLIMITED space!! - 3950X+64GB Ram+2GPUs - TITAN V FULL watercooled+TITAN RTX!! Fill the void 2.0
And again, here we are!! After 1 year and a half from my 2nd build (BTW, CHECK IT HERE if you didn't) I've moved part of it with new addition in a smaller case: THE FormD T1 !! This case is a small CNCed Aluminum jewel! I am so happy to got the possibility to be in the test shipping phase...
smallformfactor.net
I do not know maybe someone missed it..
but look at this beauty !!
FormD T1 - 9.5L with UNLIMITED space!! - 3950X+64GB Ram+2GPUs - TITAN V FULL watercooled+TITAN RTX!! Fill the void 2.0
And again, here we are!! After 1 year and a half from my 2nd build (BTW, CHECK IT HERE if you didn't) I've moved part of it with new addition in a smaller case: THE FormD T1 !! This case is a small CNCed Aluminum jewel! I am so happy to got the possibility to be in the test shipping phase...
Yeah I've posted that at least once and was mentioned a couple of times
Looking at the Front Panel lid on the formdworks site (https://formdworks.com/collections/parts/products/t1-front-panel-lid) it looks like there is a USB-C port or something of the like. Is this any indication of the possibility of adding a port on the front, or is this just an anomaly? Anyone know?
I would guess it's on the side of the panel because it looks cleaner instead of on the front.
It is a USB-C port and an SD Card slot, most likely will be an optional accessory. Only on the side because (I'm guessing now) having it on the front would shorten GPU length, and would look horrible
Agreed that the side is the better place to put it! Interested to see that when it comes out.
Speaking of extra radiators mounted externally, I was checking out some 40mm radiators from Alphacool and wondered if, with a one-slot graphics card(full cover block), could the remaining two slots be used to fit more radiators?
I made these mockups in Fusion 360 and the total thickness(GPU+rad) is 59.02mm, 0.18mm clear of the 59.20mm limit in three slot mode. The model of the card is a single slot Quadro but I reckon it should be similar to a full cover block. So maybe this configuration does technically work but it'd be hell to cable manage and run the tubings. Anyway just trying to have some fun
Edit: Just checked the height and it should be fine as well but there would be no space for tubes and fittings coming of the graphics card it seems ?
Hmmmm, I have one of those radiators, and a case and a water cooled single slot gpu.....
Last edited:
Been following thread discussion on dust filters, but was there anyone in the build list who tested the thermal differences? Curious if adding only one filter at the bottom panel (with a flipped orientation - top as exhaust) will have any negative effect. Or will dust not accumulate as much at the bottom panel anyway with flipped orientation?
The USB cable is only 5-pin - you can connect two per USB 2.0 header.
I din't know that, thanks. So 9pin header on the board is actually two rows of 4 active USB pins?
Please dont post pictures like this, lol! Now i am on Alphacools site looking at this and i dont even have a case yet!!
That's correct. There is an unused PIN just for poka yoke.
Sorry to ask but is it still a good choice to pick SF750 after the recall of the failure units?
Any recommendation for the SFX PSU if I use 9900k+2080?
Thank you~
Yeah it's fine, the ones in stock now should be good ones. But if not, you can get it RMA'd for free.
Depends on your batch number.Are theb750s on recall too like the sf600's? I just returned my 600 for a 750
Similar threads
