Well, My idea to fill the system from the GPU top part has half failed. There is too much pressure and the water can spill out. I think I will place a T fitting plus a valve...Now it's leak free ??
-
Save 15% on ALL SFF Network merch, until Dec 31st! Use code SFF2024 at checkout. Click here!
How does one have the time and dedication to do this stuff lol. I can't focus on anything at all and whenever I try focus on something I end up rewatching all 7 of RWBY. I watched like 30-40 hours of tv in 5 days.
Im just saying, I admire ur dedication but I think you might need to get a mental health check to see if you have a spending problem.
Just wanted to say very cool project! I have been following this project since the beginning in 2019 and have always appreciated the level of detail and strive for quality you guys put in. Mainly interested in building a machine learning rig that doesn't look like a shitty tower, and the T1 seems perfect for this purpose. Crossing fingers that there will be enough supply for everyone though 
Keep it up, Cheers
Keep it up, Cheers
Hobbies are healthy. Nothing wrong with it. Sure it's expensive but drugs and cars are way more. Plus this hobby, unlike a lot of people without them, has benefitted all of us a ton during these weird times. I think @fabio is good
Most of North America is under lockdown, we got nothing else to do.
Login • Instagram
Welcome back to Instagram. Sign in to check out what your friends, family & interests have been capturing & sharing around the world.
instagram.com
I think tinkering with hardware and searching for solutions to a problem is far more healthier than watching 40 hours of TV in 5 days or not being able to concentrate on something harder than 7 seasons of anime. No offense.
Agreed. I will say though I was so caught up building my PC the last few days I had been forgetting to eat and drink lol
Can this thing control the fans based on GPU temperature, and possibly even VRM temperature as well? If so it looks like just the thing I've been looking forHow to fit a QUADRO - suggestion -. You can fix it with 1 T1 medium screw to the PSU bracket.
Sent a ticket to EK about their new AIO with what's probably the most informative reply I've ever received from support. I'll paste the question and answer below. tl;dr you can't disassemble it to use in a custom loop.
I've very interested in pre-ordering your new EK-AIO 240 D-RGB. I may look to one day incorporate a GPU waterblock to make a custom loop. Do you know if it'd possible to disassemble this AIO to just the CPU block pump and radiator so that I can install my own tubing for the custom loop?
thank you for contacting us.
I am afraid this is not possible. The CPU block and the pump in the AIO are as one so the disassembly is not possible. Also, the tubing is connected to the radiator the way if it comes off, it cannot be repaired or the radiator cannot be used for different purposes (custom loop for example).
I've very interested in pre-ordering your new EK-AIO 240 D-RGB. I may look to one day incorporate a GPU waterblock to make a custom loop. Do you know if it'd possible to disassemble this AIO to just the CPU block pump and radiator so that I can install my own tubing for the custom loop?
thank you for contacting us.
I am afraid this is not possible. The CPU block and the pump in the AIO are as one so the disassembly is not possible. Also, the tubing is connected to the radiator the way if it comes off, it cannot be repaired or the radiator cannot be used for different purposes (custom loop for example).
EK basically have these made by an OEM manufacturer to EK's specifications.
They are not done in house, nor are they expandable.
Personally i tend to have a spending problem, but this ain't it my friend. Pc building is not just a hobby, it is a culture. Also, with the technological advance thet we are living, i personally feel that am not exploiting it to full potential and i feel bad about this. Watching TV on the other hand is a loss of time. Please, i am not judging, i watch a lot of tv myself. During this couple of years i might have spent more on gpu s than on smartphones..but a gpu has a longer lifespan, so it islogical i think.
Another generic "came here from Optimum Tech" lurker signing in for the survey.
Have been loving all your builds so far and will wait patiently until I can join in.
Keep up the good work and stay safe guys
Have been loving all your builds so far and will wait patiently until I can join in.
Keep up the good work and stay safe guys
(Damned the XE, I was really looking forward to see it's performance!)
Testing the system a bit and then I'll fill it!
Added an AquaComputer flow meter, swapped the DDC 3.25 (I think it has an issue with the RPM, I cannot red the speed or change the PMW through the QUADRO) for a EKWB MX 3.1 PMW.
One of the two AquaComputer thermal sensor was broken, so I had to replace it as well (today maybe was better to stay in. front of the TV, really!! ? @Proflucifer).
Add the fill/drain valve as well.
I'VE finished the zip-tie! Hoping will be not needed! ?
Testing the system a bit and then I'll fill it!
Added an AquaComputer flow meter, swapped the DDC 3.25 (I think it has an issue with the RPM, I cannot red the speed or change the PMW through the QUADRO) for a EKWB MX 3.1 PMW.
One of the two AquaComputer thermal sensor was broken, so I had to replace it as well (today maybe was better to stay in. front of the TV, really!! ? @Proflucifer).
Add the fill/drain valve as well.
I'VE finished the zip-tie! Hoping will be not needed! ?
You know what's even more work after you're done? Making extensive parts lists for every build you've done.(Damned the XE, I was really looking forward to see it's performance!)
Testing the system a bit and then I'll fill it!
Added an AquaComputer flow meter, swapped the DDC 3.25 (I think it has an issue with the RPM, I cannot red the speed or change the PMW through the QUADRO) for a EKWB MX 3.1 PMW.
One of the two AquaComputer thermal sensor was broken, so I had to replace it as well (today maybe was better to stay in. front of the TV, really!! ? @Proflucifer).
Add the fill/drain valve as well.
I'VE finished the zip-tie! Hoping will be not needed! ?
Of course!! Here the screenshot how to do, and my actual monitoring situation! Not bad! the Delta!!
Last edited:
Well, I hope others will do the same! Thanks man!!
@Navic ANd you can also create a virtual sensor based on formulas! Here mine for the DELTA Ambient Temperature-Water Temp Average.
So you can setup the fan curve based on really a lot of thing!
So you can setup the fan curve based on really a lot of thing!
I will measure later when it will be quite the backgroundCool build. How's the pump noise?Production - FormD T1 Classic (READ FIRST POST)
Now it's leak free ?? Well, My idea to fill the system from the GPU top part has half failed. There is too much pressure and the water can spill out. I think I will place a T fitting plus a valve...smallformfactor.net
Much nicer than SpeedFan@Navic ANd you can also create a virtual sensor based on formulas! Here mine for the DELTA Ambient Temperature-Water Temp Average.
So you can setup the fan curve based on really a lot of thing!
Last edited:
Similar threads
