Are these the temps with the setup you shown before? (both CPU and GPU with the same radiator, looked like 30mm? just eyeballing the thin fans)No sign from mine
EDIT, from the 11th of February ,from my local post service in Denmark, everything is delayed from China ... I have to forget my case then...
BUT, good news!!! I've downgraded the BIOS of the X570 Strix, and now the temps are so much better!!
Also, tried the Optimus Cooling Foundation in "goofy" orientation, to match my Velocity, and the temp are basically the same.
BUT, even if is a way more restrictive block, the tiny DC-LT have no problem to move water in the loop! Tested putting a flow meter just before the pump, in the most tricky point, and it spins quickly!
Added in the loop also a water temp sensor integrated in the fittings just after the radiator, to check the water temp before going inside the CPU block.
Under full load, CPU+GPU reach the 42 degrees.
End of the week I try the new EK Magnitude!
-
Save 15% on ALL SFF Network merch, until Dec 31st! Use code SFF2024 at checkout. Click here!
Exactly this setup. Titan V and 3900X with VCore offset of -0.1. The radiator is 27mm.
Ah OK, any chance I could get you to post a link to the rad? I'm kind of looking forward to some crazy "extra external rad" loop, but that might not be even needed if the temps are like yours...
Could you please post some photos of exactly how you are using the hardware? Having a hard time visualizing what you have done.
Is this how you did it? (Apologies for my Sniptool drawing I am actually a very good drawer IRL lol)
Or is it like this? Or am I visualizing this completely wrong.
Also I am guessing its this funky screw and nut setup is the issue?
Here! https://www.ekwb.com/shop/ek-coolstream-classic-se-240. The temps were amazing also with the Alphacool LT240 actually!
Youre Still bench testing right? Id love to hear how mounting and clearance is with that radiator
Well, I don't have the case yet, so no choice! It is stacked somewhere because of the COVID-19. I'll try to put everything in a Louqe Ghost for now to check the temp INSIDE a case with this setup. (Or using a B450, but is the same)Youre Still bench testing right? Id love to hear how mounting and clearance is with that radiator
I've never had water cooling before. I just want check. Is it normal for the radiator to look brownish in the middle. The radiator is black but some parts of it look brown.
Is it an alphacool radiator? The paint from one angle so one side of the fins are still the copper brown.
Yes. Thanks. Also, do you know what type of screw I have to buy to get 15mm fans to fit on the radiator? The box comes with screws designed for 25mm fans.
Thanks. I feel like I asked that before so sorry if I asked again. Also, is the x570i aorus good? I bought a strix mobo in a combo deal but the mobo broke when trying to get the lt240 on and they refunded the money it cost in to of the CPU for the mobo. Now I don't have enough to buy another strix and correct me if I wrong but the strix doesn't support the cryorig c7 and the aorus does. I just want support for low profile coolers in case I not get this case. (Fractal design says they're releasing a small case on the 18th.
I have the x570 with a 3950x and it´s perfectly fine. The monly two things I think is a bit bad it´s at vdroop ( 1.33v at idle and 1.25v under load even compensationg the VRM vdroop in bios) and also the weird fact that it can´t handle the noctuas nf-a 12x25 in PWM mode, it works only in voltage mode (and the fans don´t go under 850 rpm on that mode). The problem in pwm is that from time to time one or two of the fans don´t start.... I don´t know why. It works fine with gentle typhoons and 12x15 noctuas that I have here...
How will the ordering work eventually? Is it whoever first signed up on the website will be able to buy the case or is it directly first come first serve? If it's whoever first signed up I doubt I'll be able to get this case any time in the near future and I'll probably have to buy a different case
How will the ordering work eventually? Is it whoever first signed up on the website will be able to buy the case or is it directly first come first serve? If it's whoever first signed up I doubt I'll be able to get this case any time in the near future and I'll probably have to buy a different case
Wahaha has said after April the production of the case should match the demand so you shouldn't have to wait that long to get one. Hopefully things haven't changed since he said that.
So where will i be able to order the case? Will i have to do it here in the thread or on some specific website?
I can pick up my case from the delivery point tomorrow. Will have to pay 40 euros tax, which is as expected. As you have to pay 21% vat on imported goods above 20 euros in value in my country.
Mine has no change either. By now I think we can assume its been delayed because of the circumstances.
So received the package today ( France / Chronopost) custom fee are 36€
Similar threads
