DAN A4-SFX v4.1

Sldr

Average Stuffer
Feb 7, 2017
65
124
I am currently in the process of updating the dan-cases website. Are there any tutorials, you like to see on that page?

Currently I have:
  • A4-SFX Watercooling Guide
  • How to improve cooling performance
  • How to handle a i7 8700/9900K
  • How to get custom window kits for v4
  • Example Configurations
  • Special 3D printable parts
  • Custom Cables Guide

Are these changes live yet?
 

friendscatdied

Trash Compacter
Jan 4, 2017
36
15
What's the max fan thickness underneath the motherboard?

I'm thinking of 2x TY-100 (15mm thick, dimensions of 110mm lengthwise and 101mm width wise including frame) for underneath the motherboard and as pull on 645LT but not sure either or both will fit.
 
Last edited:

dfrgu

Trash Compacter
Mar 11, 2019
51
43
@dondan Hello Dan, I submitted an RMA request to rma@dan-cases.com and replied with required information on March 16 (EST), but since then no further contacts, and it is more than a week now.. Did you received my reply with current address?
 

dKenGuru

Airflow Optimizer
Jan 2, 2019
297
201
dken.guru
When 120mm AIO Bracket will be availble on SFFLab?
And if I want to install 120mm rad and also 120mm fan under MB, I'll need two 120mm AIO Bracket?
 

dondan

Shrink Ray Wielder
Original poster
DAN Cases
Feb 23, 2015
1,981
8,392
@LiYonJin Yes I saw that post but it was impossible to support it without a complete redisgn of the case.

@friendscatdied The max. thickness is 15-16mm. I think the thermalright TY-100 will not fit because of its other dimensions.

@dfrgu: With just your forum name I can make a connection to the rma request: But I can say I processed all left RMAs on March 23. So I think your parts are on the way. I think I have forgotten to send you an update.

@dKenGuru: I think you a mixing stuff. With the 120 AIO bracket you can install a radiator next to an GPU with ITX length or in place of the sfx psu. Under the motherboard you can't install a 120mm fan.
 

dKenGuru

Airflow Optimizer
Jan 2, 2019
297
201
dken.guru
I look at https://smallformfactor.net/forum/threads/dan-a4-sfx.252/page-76#post-136074

Here are my current changes for v4.
Adding 92mm fan mountpoint + ventholes under the motherboard
adding mointpoints over the motherboard for 120mm AIO bracket to be able to mount a 120mm fan above motherboard

Now found, what this change is gone.
92mm fan under MB is up to 25mm?

And what about availability for purchage AIO Bracket?
 

dondan

Shrink Ray Wielder
Original poster
DAN Cases
Feb 23, 2015
1,981
8,392
@dKenGuru: Fan under the board is up 15-16mm. The AIO bracket will be available on SFFLab and Caseking/OcUK at that time the v4 is available.
 

kidshenlong

What's an ITX?
Mar 26, 2019
1
0
@dKenGuru: Fan under the board is up 15-16mm. The AIO bracket will be available on SFFLab and Caseking/OcUK at that time the v4 is available.
Off the back of this Dan, do you have any idea when Caseking/OcUK will start listing v4? Just trying to figure out the best/cheapest option for getting a V4 in the UK.
 

Creep

SFF Lingo Aficionado
Mar 2, 2017
91
83
Has anyone ever rigged a slim profile 120 on the side panel of the V3 that would push/pull over the mainboard (with an Asetek AIO installed)?
 

kanth

Trash Compacter
Feb 20, 2019
52
13
Good evening everyone !

Guys I had some bad luck and the day I got home and installed my EVGA 2080ti XC Gaming , same night my SF750 PSU Died for no reason.

I was wondering as I am very mad at Corsair atm since they don't reply to my tickets.
Will a Seasonic SGX 650W Gold be enough to Hold 2080ti Oced , Ryzen 2700x on POB , an m.2 , and 4 or 5 92 mm fans??
No AIO , No HDD no SATA generally.
I dont think I will OC but I wanna see if the limits of the PSU will be exceeded.

Anyone have any similar Build?
 

PeGys

SFF Lingo Aficionado
Jan 13, 2019
111
72
Good evening everyone !

Guys I had some bad luck and the day I got home and installed my EVGA 2080ti XC Gaming , same night my SF750 PSU Died for no reason.

I was wondering as I am very mad at Corsair atm since they don't reply to my tickets.
Will a Seasonic SGX 650W Gold be enough to Hold 2080ti Oced , Ryzen 2700x on POB , an m.2 , and 4 or 5 92 mm fans??
No AIO , No HDD no SATA generally.
I dont think I will OC but I wanna see if the limits of the PSU will be exceeded.

Anyone have any similar Build?
If you bought the PSU at a local retailer, just go there with the PSU. You got like 7 years warranty on it.

I guess even a sf600 platinum will be sufficient so a 650w seasonic will be good I guess.

I used to have a 7700k, 1 m.2, 1 ssd, a 92mm fan, a 120mm aio and a evga gtx 1080ti ftw3 elite gaming on my sf600 platinum with no issues. It only starts spinning the fan while gaming.
Now I'm running the system on a g-unique arch deamon 600w platinum external psu without a swaet.