DAN A4-SFX v4.1
- Thread starter dondan
- Start date
@Jan Olsen Also for v4 the max card thickness is dual slot.
@omardesu: There is no delay. The case will be ready for shipping in april.
@omardesu: There is no delay. The case will be ready for shipping in april.
What's the max fan thickness underneath the motherboard?
I'm thinking of 2x TY-100 (15mm thick, dimensions of 110mm lengthwise and 101mm width wise including frame) for underneath the motherboard and as pull on 645LT but not sure either or both will fit.
I'm thinking of 2x TY-100 (15mm thick, dimensions of 110mm lengthwise and 101mm width wise including frame) for underneath the motherboard and as pull on 645LT but not sure either or both will fit.
Last edited:
@dondan Hello Dan, I submitted an RMA request to rma@dan-cases.com and replied with required information on March 16 (EST), but since then no further contacts, and it is more than a week now.. Did you received my reply with current address?
@LiYonJin Yes I saw that post but it was impossible to support it without a complete redisgn of the case.
@friendscatdied The max. thickness is 15-16mm. I think the thermalright TY-100 will not fit because of its other dimensions.
@dfrgu: With just your forum name I can make a connection to the rma request: But I can say I processed all left RMAs on March 23. So I think your parts are on the way. I think I have forgotten to send you an update.
@dKenGuru: I think you a mixing stuff. With the 120 AIO bracket you can install a radiator next to an GPU with ITX length or in place of the sfx psu. Under the motherboard you can't install a 120mm fan.
@friendscatdied The max. thickness is 15-16mm. I think the thermalright TY-100 will not fit because of its other dimensions.
@dfrgu: With just your forum name I can make a connection to the rma request: But I can say I processed all left RMAs on March 23. So I think your parts are on the way. I think I have forgotten to send you an update.
@dKenGuru: I think you a mixing stuff. With the 120 AIO bracket you can install a radiator next to an GPU with ITX length or in place of the sfx psu. Under the motherboard you can't install a 120mm fan.
I look at https://smallformfactor.net/forum/threads/dan-a4-sfx.252/page-76#post-136074
Here are my current changes for v4.
Adding 92mm fan mountpoint + ventholes under the motherboard
adding mointpoints over the motherboard for 120mm AIO bracket to be able to mount a 120mm fan above motherboard
Now found, what this change is gone.
92mm fan under MB is up to 25mm?
And what about availability for purchage AIO Bracket?
Here are my current changes for v4.
Adding 92mm fan mountpoint + ventholes under the motherboard
adding mointpoints over the motherboard for 120mm AIO bracket to be able to mount a 120mm fan above motherboard
Now found, what this change is gone.
92mm fan under MB is up to 25mm?
And what about availability for purchage AIO Bracket?
Off the back of this Dan, do you have any idea when Caseking/OcUK will start listing v4? Just trying to figure out the best/cheapest option for getting a V4 in the UK.
I called CaseKing the other day, but they wouldn't know. I hope sometimes in April / May this year.
Ahh ok. I have the 270i. I was thinking trying to attach it directly to the side panel but wedging it in there seems to work, as well.
Good evening everyone !
Guys I had some bad luck and the day I got home and installed my EVGA 2080ti XC Gaming , same night my SF750 PSU Died for no reason.
I was wondering as I am very mad at Corsair atm since they don't reply to my tickets.
Will a Seasonic SGX 650W Gold be enough to Hold 2080ti Oced , Ryzen 2700x on POB , an m.2 , and 4 or 5 92 mm fans??
No AIO , No HDD no SATA generally.
I dont think I will OC but I wanna see if the limits of the PSU will be exceeded.
Anyone have any similar Build?
Guys I had some bad luck and the day I got home and installed my EVGA 2080ti XC Gaming , same night my SF750 PSU Died for no reason.
I was wondering as I am very mad at Corsair atm since they don't reply to my tickets.
Will a Seasonic SGX 650W Gold be enough to Hold 2080ti Oced , Ryzen 2700x on POB , an m.2 , and 4 or 5 92 mm fans??
No AIO , No HDD no SATA generally.
I dont think I will OC but I wanna see if the limits of the PSU will be exceeded.
Anyone have any similar Build?
If you bought the PSU at a local retailer, just go there with the PSU. You got like 7 years warranty on it.
I guess even a sf600 platinum will be sufficient so a 650w seasonic will be good I guess.
I used to have a 7700k, 1 m.2, 1 ssd, a 92mm fan, a 120mm aio and a evga gtx 1080ti ftw3 elite gaming on my sf600 platinum with no issues. It only starts spinning the fan while gaming.
Now I'm running the system on a g-unique arch deamon 600w platinum external psu without a swaet.
Neither Dan's website nor SFFLAB have V4 spec listed making me reluctant to pre-order. When will the page be updated with the full spec detail and picture? I would like USB-C and need assurance what I am ordering will have it.
Will the case cut out be USB-C or USB-A with a USB-C connector. It is likely to be the former but again I need assurance
Will the case cut out be USB-C or USB-A with a USB-C connector. It is likely to be the former but again I need assurance
