Yeah, I purchased the RAM height for the case itself and not with the AIO included (since it was a included after the build was all planned out). Think I'll swap down to some LPX or HyperX 16GB and pocket some money or add an M.2.
DAN A4-SFX v4.1
- Thread starter dondan
- Start date
Yeah, I purchased the RAM height for the case itself and not with the AIO included (since it was a included after the build was all planned out). Think I'll swap down to some LPX or HyperX 16GB and pocket some money or add an M.2.
Interesting MOD:
A Dynatron T318 on AMD Ryzen. I will try it too later this day
https://new.qq.com/omn/20181218/20181218A0I6V9.html
A Dynatron T318 on AMD Ryzen. I will try it too later this day
https://new.qq.com/omn/20181218/20181218A0I6V9.html
May I ask , I need to order Cables from Cablemod as I believe that guy from Pslate is charging them Ultra expensive... Plus that I'm gonna have extra taxes in my country for them.
So the question is :
24 Pin : 150mm flex Pro 2 Alu Comb
8 Pin EPS : 450mm flex Pro 6 Alu Comb
8 Pin PCie : 250mm flex Pro Bridged 4 Alu Comb
The EPS will be passing around the Redux fan 25mm , all the way via the GPU side and will be passed in the hole of the Plate the Mobo sits on
( I already have it like that )
I'm not sure though if the Pro Cables will pass through that Hole.
The Pcie, I want them to pass from PSU Climbing up and fitting on the 2080ti directly , not via the front panel that some people do.
Any thoughts or anything that I am missing and you can help me before I order something wrong ?
Thanks in advance!
So the question is :
24 Pin : 150mm flex Pro 2 Alu Comb
8 Pin EPS : 450mm flex Pro 6 Alu Comb
8 Pin PCie : 250mm flex Pro Bridged 4 Alu Comb
The EPS will be passing around the Redux fan 25mm , all the way via the GPU side and will be passed in the hole of the Plate the Mobo sits on
( I already have it like that )
I'm not sure though if the Pro Cables will pass through that Hole.
The Pcie, I want them to pass from PSU Climbing up and fitting on the 2080ti directly , not via the front panel that some people do.
Any thoughts or anything that I am missing and you can help me before I order something wrong ?
Thanks in advance!
Ah ok - it would have been good to have that option to save some $ if planning to not install a graphics card, especially since the riser is available as an individual part# itself
Is that something that can be considered ?? - if not, oh well
Thank youYou can sell the included riser on ebay
any updates on your finding, hows the temps on T318 compared to cryorig c7 cuInteresting MOD:
A Dynatron T318 on AMD Ryzen. I will try it too later this day
https://new.qq.com/omn/20181218/20181218A0I6V9.html
Last edited:
also someone mention regarding turning the case upside down improves temps, not sure if you got to see this Dan.
https://hardforum.com/threads/dan-a4-sfx-the-smallest-gaming-case-in-the-world.1799326/page-371
https://hardforum.com/threads/dan-a4-sfx-the-smallest-gaming-case-in-the-world.1799326/page-371
Just finished my build guide for the Dan A4 SFX v3. Ran into several issues with my first SFF build and appreciate the help I got from the community. Documented my build in detail. Goal of this system was to make a silent Dan A4 case. This one is inaudible at idle and when doing basic windows tasks - no jet engine here. Here is the link to the Youtube video: .
Someone who has tested whether this card fits in version V3, is there room for thicker graphics cards in version 4 ?
Thickness video card is in the spec. 50mm
https://www.komplett.no/product/112...60-rog-strix-oc?offerId=KOMPLETT-310-1120658#
Thickness video card is in the spec. 50mm
https://www.komplett.no/product/112...60-rog-strix-oc?offerId=KOMPLETT-310-1120658#
