Nope, just line up your SSD to the screw holes and screw them in. They'll hold just fine. I was overthinking it at first too, but 2 screws totally works.
Production CONSOLE and CONSWOLE: entry level 2-slot and 3-slot console cases! [Available Now!]
- Thread starter KSliger
- Start date
Well now this case is very good as the new rtx 3080 founders edition collers will be excellent for the sliger console because of the airflow of the gpu side of the case
I dont think so, because if the riser cable will get connected from the right side then it won't affect the airflow for the rtx 3080
You're right.
This is one of the few perfect cases for the FE 3080/3090 to use with CPU air cooling.
It looks like they haven't posted the build guide on the web site. You could check out the the image gallery on the Sliger site:
Conswole | Sliger
Sliger Designs is a manufacturing company based in the United States specializing in computer cases and systems.
Reddit can always be searched as well:
Reddit - Dive into anything
www.reddit.com
Hope this helps!
Hi guys, on the website, I see this option: USB 3.2 Type E (USB C)+ 19-Pin (USB A)**
I have a few questions:
What is a USB 3.2 Type E exactly? I am getting Asus B550-I Mother Board, will I be able to use this? How is it different from the first type c option?
I have a few questions:
What is a USB 3.2 Type E exactly? I am getting Asus B550-I Mother Board, will I be able to use this? How is it different from the first type c option?
The USB 3.2 Type E is the USB type C connector on the front IO, the connector circled in red is the dedicated plug that the Asus B550 has. Many motherboards don't have this connector and you would want the first option, Single 19-Pin (USB A + USB C). You will get faster transfer speeds with the USB 3.2 Type E.
Is there any confirmation that an Arctic Accelero III will fit in the CONSWOLE? If so, can you use 25mm or does it need to be 15mm fans on top of it?
Is there anyway to mount the gpu against the bottom of the case if the 2 noctua fans are removed? Or, is there anyway to flip the gpu mounting so that gpu backplate faces up?
Is there anyway to mount the gpu against the bottom of the case if the 2 noctua fans are removed? Or, is there anyway to flip the gpu mounting so that gpu backplate faces up?
Just recover one year of posts on CL families...
CL530 (horizontal) is interesting me to replace SM550 as HTPC as I'm looking for 3 slots GPU and stronger CPU cooling (SM560 is too large as HTPC for my needs).
So here are my Comments/Questions :
CL530 (horizontal) is interesting me to replace SM550 as HTPC as I'm looking for 3 slots GPU and stronger CPU cooling (SM560 is too large as HTPC for my needs).
So here are my Comments/Questions :
- Best CPU cooler should be now ID-Cooling IS-60 EVO with 120mmx25mm fan on top. Better MB compatibility than black ridge with beefier heatsink (requires push-pull fans to perform fine)
- How standard case feet are put on case (glued I suppose?) Are side panel in aluminum or steel (I assumre aluminum)
- Have somebody tried which setup is best in horizontal stand (intake from top (standard) or intake from bottom)?
Good point!
C1 is a great contender for CL530 also even if I'm not a fan of their fan (could be replaced by Noctua 120x15).
Black ridge with push/pull fan is better than L12 with only one fan.
However Cryorig C1 seems expensive and difficult to get. IS-60 EVO is at least easier/cheaper to get...even it's pretty long..
Overall it's great to see several powerful cpu cooler as soon as we are reaching 75mm clearance..
Other question : do you know length & type of riser please?
