Production cases: SLM1m/ SLM1 4L/ SLM2 5.7L by Custom_MOD

[DASBOOT]

@sergiiua
Well my build of SM4L with a Colorful CNV B650 Gaming Frozen V14 MATX board is taking shape with a Ryzen 7 7700G. It will be dual boot Sequoia 15.2 and Win 11 Pro 24H2 when fully completed. Here are some pics, I modded the case for a Type E USB front panel port, and all the OEM stainless Torx M3 case panel screws were replaced with Rainbow Colored Titanium versions from Ali-Express where possible, the ULTRA-SLIM vandal-style Power Button was upgraded to have HD Activity Light. All wiring was custom Dream Big Ray, ModDyi, and the power transfer cable, in white, was all my own mod work. GPU is RX 6600.
CPU with Thermal Grizzly contract frame and back plate. Screws to ID Cooling were modded to 4mm. ID COOLING screws are not 4mm. TG backplate is threaded 4mm.

Cooler installed fan replaced with Corsair 15mm x 120mm

MODDED TRANSFER CABLE TO ALL WHITE (RIGHT HAND 90 IN WHITE IS ONLY OPTION)

ADDED USB TYPE E TO USB C FRONT PANEL AND ULTRA SLIM POWER BUTTON

 

[sergiiua]

@sergiiua
Well my build of SM4L with a Colorful CNV B650 Gaming Frozen V14 MATX board is taking shape with a Ryzen 7 7700G. It will be dual boot Sequoia 15.2 and Win 11 Pro 24H2 when fully completed. Here are some pics, I modded the case for a Type E USB front panel port, and all the OEM stainless Torx M3 case panel screws were replaced with Rainbow Colored Titanium versions from Ali-Express where possible, the ULTRA-SLIM vandal-style Power Button was upgraded to have HD Activity Light. All wiring was custom Dream Big Ray, ModDyi, and the power transfer cable, in white, was all my own mod work. GPU is RX 6600.
CPU with Thermal Grizzly contract frame and back plate. Screws to ID Cooling were modded to 4mm. ID COOLING screws are not 4mm. TG backplate is threaded 4mm.

Cooler installed fan replaced with Corsair 15mm x 120mm

MODDED TRANSFER CABLE TO ALL WHITE (RIGHT HAND 90 IN WHITE IS ONLY OPTION)

ADDED USB TYPE E TO USB C FRONT PANEL AND ULTRA SLIM POWER BUTTON

Great work on the details, great assembly!

 

[sergiiua]

Hi guys! I'm asked about compatible 5.0 cables with left angle, here is one of the options:
LINKUP - PCIE 5.0 Left Angle 24cm

Compatible with models:
Case SLM1 3.7L r.7 LP edit.
Case SLM2 5.7L HDplex edit.
Case SLM2 6L flex 1U edit. (in stock)
Case SLM3 8L
Case SLM4 10L

 

[GucksTV]

Hey guys!
I just wanted to share my last Buildlog inside the SLM1 3.7L rev.7 with RTX 5060 Low Profile:

 

[sergiiua]

Hey guys!
I just wanted to share my last Buildlog inside the SLM1 3.7L rev.7 with RTX 5060 Low Profile:

Please share your experience, was HDPLEX 250W GaN power sufficient for the 5060 video card or do you still need HDPLEX 500W GaN for its stable operation? I don't have the opportunity to buy 5060 to test it((

Maybe there is an answer in the video, but I don't understand German to understand the question. Friend, write here in a few words.

 

[DASBOOT]

A 5060 low-profile graphics card typically requires a minimum of a 450W power supply, though 500W is recommended for optimal performance and to accommodate other system components. Many users won't need to upgrade their existing PSU if it's already around this capacity.
I would be concerned about the Temps even with a GaN unless direct cooling was applied to the PS. I am not a gamer and would never use this card or anything from Nvidia.

 

[GucksTV]

Please share your experience, was HDPLEX 250W GaN power sufficient for the 5060 video card or do you still need HDPLEX 500W GaN for its stable operation? I don't have the opportunity to buy 5060 to test it((

Maybe there is an answer in the video, but I don't understand German to understand the question. Friend, write here in a few words.

So there will be a follow-up video to the buildlog, where I further improve the system with Fan-Duct and GPU Deshroud. Its already captured and shared here in the forum soon! The Setup with RYZEN 7500F (just 6000MHz EXPO and 2000MHZ FCLK) and RTX 5060 at Stock was hitting the 250W of the GaN but remained stable during my testing. Aftrer changing the Paste and getting better Temps with the Deshroud, the System got a bit unstable (I guess cause it was clocking higher related to the better temps ^^) therfore I have been letting the RYZEN CPU run in 45W Eco Mode to safe arround 20W and set the Power Limit of the GPU to 85% to reduce it to 120W (before that it was hitting +145W by itself)...so this reduction between 40-45W gave the PSU enought playroom. It runs fine, but really hot (the PSU)...somaybe some active cooling would be recomendable!


By the way...
I have build in another Custom_Mod SLM2 6L case and there will be a follow-up to this Livestream aswell:

 

[DASBOOT]

Without even building (and GaN runs much cooler than MOSFETs) "I told you so"

"But really hot, (the PSU)... someday maybe some active cooling would be recommendable!"

 

[GucksTV]

So I had the opportunity to check out another SLM2 case with three different GPUs and showed of the the newly arrived white version of the Enhance ENP-8345L:


Feel free to check it out!

 

[sergiiua]

All my cases can be used horizontally, just leave a comment to your order and I will add aluminum legs.

 

[sergiiua]

I don't use storage at home, but I've been told that similar enclosures might be in demand. So, this case can accommodate up to 10 2.5-inch drives. Or a smaller number of 4 or 6, plus an expansion card for NVMe drives. What do you think?

https://www.custom-mod.com/en/stranica-tovara/slm2-6-2l-nas?currency=USD

 

[GucksTV]

Did anybody say Intel Arc Pro B50 with 16GB VRAM and Low Profile?!
Check out my PC Buildlog Livestream with the Custom_Mod SLM1 3.7L by @sergiiua



Hope you enjoy it! <3