Production case SX1 6.8L / SX2 7.5L by Custom_MOD

[sergiiua]

Hi, does the SX mid 6.8L rev.4 fit a PowerColor Red Dragon RX 570?
On the page it says that the dimmentions are: 255mm*137mm*47mm. And in the description say only 44mm... anyone tried some card with this width?

It seems you can not close the lid.

 

[thiagottjv]

@sergiiua Are we going to have a SX 6.8L steel version? Cheaper? Any ETA?

 

[o3ton]

can you (custom mod) make a cm sx mid 6.8 with a 3.5 hdd mount where the sfx psu is and sell it with a g-unique psu, and i'm pretty you can fit 2 x 3.5 hdd if you did it.

 

[sergiiua]

I present to your attention the new design of the case SX stl 7.1L rev.2

Tell me how you idea fasteners covers on hooks? I removed the screws from prominent places.

 

[sergiiua]

@sergiiua Are we going to have a SX 6.8L steel version? Cheaper? Any ETA?

Cheaper steel SX stl 7.1L rev.2

 

[sergiiua]

can you (custom mod) make a cm sx mid 6.8 with a 3.5 hdd mount where the sfx psu is and sell it with a g-unique psu, and i'm pretty you can fit 2 x 3.5 hdd if you did it.

Are you not afraid to use the pico of G-Unik? I burned the whole computer with her! I suffered a loss of $ 500. I do not know what exactly was the cause, but Guri never sent a replacement. More than 2 months have passed since I sent him the burned picoPSU for repair.

 

[comagoosie]

I'm really liking the design of the SXM stl 6.3L. If you happen to have a NH-L12s cooler on hand, can you see if it fits? I know the cooler height is listed at 65mm, but I'm curious if you gave 5mm of clearance for turbulence.

 

[sergiiua]

I'm really liking the design of the SXM stl 6.3L. If you happen to have a NH-L12s cooler on hand, can you see if it fits? I know the cooler height is listed at 65mm, but I'm curious if you gave 5mm of clearance for turbulence.

Unfortunately, this cooler is not available.

 

[thiagottjv]

I present to your attention the new design of the case SX stl 7.1L rev.2

Tell me how you idea fasteners covers on hooks? I removed the screws from prominent places.

@sergiiua I wasnt really liking the other 7.1L case, but this one is gettin better.
May I suggest something? Could you extend the front panel and "wrap" to the bottom and screw there (like the DAN A4 case) so there is no screws at the front?

 

[devinkato]

Sergii - when will the 6.8 or 7.1 be available for purchase and shipping to the US?

 

[sergiiua]

Sergii - when will the 6.8 or 7.1 be available for purchase and shipping to the US?

we are trying to solve the problem of payment for goods

 

[jirachijirachi]

Hi Sergiiua,

How is the height limit of the GPU calculated? Is it 140mm from the base of the card (gold connector) or from the base of bracket tip? Does the 140mm include the space for power cable? I have a card that is 135mm tall (from the gold connector to the top of card, exclusing space for poewr cable. It is a RX580 Nitro+) and wonder if that fits well or not.

 

[wbi]

Hey there! I wanna buy one, but it seems pretty hard to get in contact with you. I sent an email about two weeks ago and even a message on the Facebook page..

 

[nextpc]

Hi There @surgiiua

I'm not sure if I can post here, but seems like your more active here so here it goes.

I'm interested in ordering a Customod Mini 3.2L or 3.9L.

Questions:

1) Is the 3.2L Mini still available for order ?
If yes, where can I order it?
Or has it changed to 3.9L?

2) The 3.9L mini has bright Green internal motherboard tray. I really Like it.
Is this what I will receive when I order the Customod Mini in Black?

3) The website says, "Cases under the order until April 19th".
Does this mean that the Cut off for orders is April 19th and the items will ship out on June 10th?

4) If the Customod Mini is ordered WITHOUT a usb 3.0, does the front Panel still have a hole?

Regards

 

[KidWeaBoo]

If I order now, when will the sxm be delivered?

 

[sergiiua]

If I order now, when will the sxm be delivered?

Bunch #27. Collection of orders until APRIL 19. Order submission is scheduled for 10 JUNE.

 

[sergiiua]

Hello friends!

I have great news. Soon we will have a lot of cases in stock.

Case SX al 6.8L received several updates.
1. The power button on the top of the cover. It does not interfere with the components inside.
2. USB port is now at the same place under the video card. It can be either USB 3.0 or USB 3.1 Type-C.
3. We removed a few more mounting screws by replacing them with hooks.
4. Now 2.5 "drives are mounted through anti-vibration spacers. (Supplied with the case)

 

[chinevo]

Amazing color!

 

[nextpc]

Hi There @surgiiua

I'm interested in ordering a Customod Mini 3.2L or 3.9L.

1) The 3.9L mini has BRIGHT GREEN internal motherboard tray in the photos. I really Like it.
Is this what I will receive when I order the Customod Mini ?

2) The website says, "Cases under the order until April 19th".
Does this mean that the Cut off for orders is April 19th and the items will ship out on June 10th?


Hope you can get back to me before the deadline for ordering.

Regards

 

[sergiiua]

Hi There @surgiiua

I'm interested in ordering a Customod Mini 3.2L or 3.9L.

1) The 3.9L mini has BRIGHT GREEN internal motherboard tray in the photos. I really Like it.
Is this what I will receive when I order the Customod Mini ?

2) The website says, "Cases under the order until April 19th".
Does this mean that the Cut off for orders is April 19th and the items will ship out on June 10th?


Hope you can get back to me before the deadline for ordering.

Regards

Yes, we paint the inside green.

Yes, the 20th day is the deadline for paying orders to batch 27. We will send after 10 June