T1 - Sandwich Kit - Limited Editions

[doughnut]

Hi,

Are there any tracker threads with release dates with the limited editions of this case specifically cosmic orange and if I did not want to wait are there any limits to which 240mm aios will fit in this case?

I am considering:

Corsair NAUTILUS 240 RS ARGB​

Cooler Master MasterLiquid Atmos 240
Cooler Master MasterLiquid 240 Core II​

AI understand that I will need to replace at least one of the fans, however I have had barriers with even the tubing connectors pressing against a PSU in other cases.

Thanks.

 

[rfarmer]

I have the Corsair Nautilus in my T1 and the only problem is the pump cap height. If your case is 2.25 slot or under it is fine but if 2.5 or over and the cap it too tall, you can 3d print a cap with a lower height.

This is mine with the 3d printed cover. The Atmos is probably the most used in the T1 and as far as I know fits fine, with either one you do have to use a slim fan above the motherboard.

 

[doughnut]

he Corsair Nautilus in my T1 and the only problem is the

Thanks so much for the message. If I used an SFX-L PSU specifically from Asus ROG would the connectors for the radiator tubes get in the way?