Curious, would there be room for this?
But yeah that's a tight build. Maximized all the nooks and crannies.
Last edited:
Production Sliger SM550/560/570/580 (2 and 3 slot riser layouts, with air and liquid cooling variants)
- Thread starter KSliger
- Start date
Curious, would there be room for this?
But yeah that's a tight build. Maximized all the nooks and crannies.
in my current setup, there is some space at the front, so I could see it work
Curious, would there be room for this?
But yeah that's a tight build. Maximized all the nooks and crannies.
thats the space im talking about. Hope that helps. Kind of only works if you have your tubes coming out the other way and use the pigtail cables tho
That makes much more sense. So once I get the pump I now have the cpu fan header available to use. So I could feasibly set up the three 120mm fans off the sys header and the 92mm fan off the cpu header right? Where does the pump connect to? I don’t see a pump header anywhere in the board manual. Sorry for so many questions.
The alphacool cable is a 3 pin fan cable and that's it. The 2 radiator fans and the 3 pin from the alphacool are connected to my cpu fan header via the 3 way splitter.
Awesome build, glad folks are trying the Eisbaer LT block. How loud is it under load? Are you not using a reservoir and just filling the radiator up top with water?
The most challenging build I've ever done. Custom pslate cables on the way.
I'm really interested in how loud the DC-LT pump gets. It should be theoretically possible to get a 120mm rad an dfan under the PSU, but honestly looking at how crowded the case is that seems like madness.
It does fit the CASE. It just doesn't fit the tubes that I am routing around it. I have another idea that might work so may be able to go back to the Vengeance Pro.
The pump is pretty much inaudible. I filled it outside and put the filled loop back in.
Agreed. I went ahead and ordered mine and asked if it can be shipped without one with partial refund or swapped for black. Never hurts to ask!
Even with a 15mm fan, it's a tight squeeze. MAYBE if you did something special with custom cables.
Can they do that ? Frankly, i have not ordered mine yet, these little details keep me from deciding. For a while i almost ordered the ncase m1, but the gpu thermals are better in a sandwich layout, and i like the robust look that the sliger cases have. It is not that i will use the system for gpu heavy tasks, but still. Also, my graphic card has an unique blue metallic finish and i would like to show it!
They may do it, those parts can be bought separately as extras from the website. Worst case if they can't, then cancel the order. I just didn't want to miss out on another coupon lol
Ahh thx. looks great, are custom cables the best way to clean up and make space in sffpc builds?
Similar threads
