When you say full panels kit, we are talking about side panels, top and front? Cos I need sidepanels only, but I'll go for top panel as well if that is the case
-
Save 15% on ALL SFF Network merch, until Dec 31st! Use code SFF2024 at checkout. Click here!
NCASE M1 V6 info
- Thread starter Necere
- Start date
Panel kit = all four exterior panels (front/top/left/right).When you say full panels kit, we are talking about side panels, top and front? Cos I need sidepanels only, but I'll go for top panel as well if that is the case
Yes, the front I/O kit is backward compatible with all versions. No prices yet.
@Necere or somebody do you know if Alphacool Eisbaer 240 or LT240 or can be install in ncase?
www.alphacool.com
www.alphacool.com
Wich is de max distance for RAD (X mm) + FANS (25mm) for AIOS, 24 or 30mm?
I see this in first page:
Thanks!!!
Alphacool Eisbaer LT240 CPU - Black
Mit der Alphacool Eisbaer LT erhältst Du eine leistungsfähige kompakte Wasserkühlung, die ihrem größeren Bruder, der Eisbaer AiO, in kaum etwas nachsteht. Wie auch die normale Eisbaer, hebt sich die Eisbaer LT deutlich vom üblichen...
www.alphacool.com
Alphacool Eisbaer 240 CPU - Black
Mit der Eisbaer revolutioniert Alphacool den AIO Kühlermarkt grundsätzlich. Sind klassische AIO CPU-Kühler Wegwerfprodukte die weder erweiterbar noch wieder befüllbar sind, ist die Alphacool Eisbaer modular aufgebaut und kann jederzeit...
www.alphacool.com
I see this in first page:
- Radiators less than 35mm thick are recommended
Thanks!!!
Last edited:
I think the LT240 will fit, I dont think the regular 240 will fit.
From alphacool's website for the individual eisbaer pump/res combo:
www.alphacool.com
pump/res height 68 mm +
30 mm rad thickness +
25 mm fan thickness
-----------
123 mm of the max 130 mm cpu block height. If the 68 mm is without fittings, I dont think this will fit. If the 68mm is with fittings installed, then maybe some right angle fittings would make it fit.
You could also leave off the fan for the half of the radiator that is directly above the CPU, but you would lose a lot of performance.
From alphacool's website for the individual eisbaer pump/res combo:
Alphacool Eisbaer (Solo) - 2600rpm - Black
Neben den verschiedenen vorbefüllten Eisbaeren die "Out oft the Box" verwendet werden können, gibt es das Kernstück der Eisbaer auch als Solo Variante. Damit können sie selbst bestimmten wie sie ihren Kreislauf aufbauen möchten und...
www.alphacool.com
pump/res height 68 mm +
30 mm rad thickness +
25 mm fan thickness
-----------
123 mm of the max 130 mm cpu block height. If the 68 mm is without fittings, I dont think this will fit. If the 68mm is with fittings installed, then maybe some right angle fittings would make it fit.
You could also leave off the fan for the half of the radiator that is directly above the CPU, but you would lose a lot of performance.
Last edited:
@Necere or somebody do you know if Alphacool Eisbaer 240 or LT240 or can be install in ncase?
Alphacool Eisbaer LT240 CPU - Black
Mit der Alphacool Eisbaer LT erhältst Du eine leistungsfähige kompakte Wasserkühlung, die ihrem größeren Bruder, der Eisbaer AiO, in kaum etwas nachsteht. Wie auch die normale Eisbaer, hebt sich die Eisbaer LT deutlich vom üblichen...
Alphacool Eisbaer 240 CPU - Black
Mit der Eisbaer revolutioniert Alphacool den AIO Kühlermarkt grundsätzlich. Sind klassische AIO CPU-Kühler Wegwerfprodukte die weder erweiterbar noch wieder befüllbar sind, ist die Alphacool Eisbaer modular aufgebaut und kann jederzeit...
Wich is de max distance for RAD (X mm) + FANS (25mm) for AIOS, 24 or 30mm?
I see this in first page:
Perfect!!
- Radiators less than 35mm thick are recommended
Thanks!!!
The LT240 definitely fits. I had to run the tubing from the rad on the CPU side and finagle the tubing around, but it fit well and performed well for me. Still using the radiator off it too now in a custom loop.
It's visible in one of the images in the first post. It has 10mm of adjustability, which is about half a slot, and supports cards between 40-50mm thick (2-2.5 slots). 2.75 slot cards won't leave enough room for the bracket underneath.
I think the LT240 will fit, I dont think the regular 240 will fit.
From alphacool's website for the individual eisbaer pump/res combo:
Alphacool Eisbaer (Solo) - 2600rpm - Black
Neben den verschiedenen vorbefüllten Eisbaeren die "Out oft the Box" verwendet werden können, gibt es das Kernstück der Eisbaer auch als Solo Variante. Damit können sie selbst bestimmten wie sie ihren Kreislauf aufbauen möchten und...
pump/res height 68 mm +
30 mm rad thickness +
25 mm fan thickness
-----------
123 mm of the max 130 mm cpu block height. If the 68 mm is without fittings, I dont think this will fit. If the 68mm is with fittings installed, then maybe some right angle fittings would make it fit.
You could also leave off the fan for the half of the radiator that is directly above the CPU, but you would lose a lot of performance.
Yes yes, I know.. I asked becouse I would like install a 30mm rad. 24mm Is very low profile. I don't know if in comparison have a several diferences un temps...
@Necere what is the maximun dimensions for a rad? X x Y x 35mm?
Maybe I build a custom loop with a some of this rads (in order of preferences):
1. Alphacool NexXxoS ST30 Full Copper X-Flow 240mm radiator (LxWxH: 293 x 124 x 30mm)
2. Alphacool NexXxoS ST30 Full Copper 240mm radiator V.2 (LxWxH: 278 x 124 x 30 mm)
3. Alphacool NexXxoS ST30 Full Copper 240mm radiator (LxWxH: 275 x 124 x 30 mm )
@Necere what is the maximun dimensions for a rad? X x Y x 35mm? And, If I pre-ordered Jul 31st my V6, when do you think they would send it?
Thanks & Regards
I would say about 295x145mm. Internally there's 307mm from the inside rear to inside front of the chassis, but you have to clear the flanges when installing. It's 289mm between the flanges, so anything over that you have to angle in. Also keep in mind that a fan on the rear and/or drive on the inside-front will eat into the available space by their respective thicknesses.
SFFLab gave you a shipping date when you ordered. I believe it was September 20th.
I think that V2 is the best option
Yes I see know in my email, sorry & thanks
So far I have Ryzen 3600x, 2070 Super, Ballistix Sport LT 32gb, 4 Noctua Redux 120mm fans (might have went a little fan happy, might not use them all but too late to return), Scythe Big Shuriken 3, Corsair SF750, Crucial P1 M.2.
Just waiting on a good x570 itx motherboard and pslate custom cables. Also need to figure out what SSD I want for front panel and a good 1440p monitor.
I might have went a tad overboard for my first PC build but I’m excited to actually start assembling it once I get my NCASE.
Last edited:
HARDWARE:
Asus ROG Strix X470-I Gaming
AMD Ryzen 7 2700X
G-Skill Trident Z 16GB DDR4-3200 CL14
KFA2 GeForce® RTX 2080 OC
M.2 Samsung 950 PRO 500GB
SSD Samsung 840 EVO 750GB
HDD WD Green 3TB Ext.
Corsair SF600
Asus PQ348G
Logitech G710+
Logitech G502 Hero
W10 Pro
COOLING (to decide...)
AIR: Noctua NH-C14 + Corsair Reposition fans H115i (like a ML140PRO specs with RGB)
LIQUID: Alphacool Eisbaer LT Black + FrozenQ M1 reservoir + Aquacomputer QUADRO + RGBpx Splitty4 + 4 Corsair Reposition H100i (like a ML120PRO specs with RGB)
I use RGB only to see temp of my computer. (BLUE - Cold <-> RED - Hot)
Asus ROG Strix X470-I Gaming
AMD Ryzen 7 2700X
G-Skill Trident Z 16GB DDR4-3200 CL14
KFA2 GeForce® RTX 2080 OC
M.2 Samsung 950 PRO 500GB
SSD Samsung 840 EVO 750GB
HDD WD Green 3TB Ext.
Corsair SF600
Asus PQ348G
Logitech G710+
Logitech G502 Hero
W10 Pro
COOLING (to decide...)
AIR: Noctua NH-C14 + Corsair Reposition fans H115i (like a ML140PRO specs with RGB)
LIQUID: Alphacool Eisbaer LT Black + FrozenQ M1 reservoir + Aquacomputer QUADRO + RGBpx Splitty4 + 4 Corsair Reposition H100i (like a ML120PRO specs with RGB)
I use RGB only to see temp of my computer. (BLUE - Cold <-> RED - Hot)
Planned is:
Custom Loop cooling...
a 3700x, Asus 2080 Turbo (already bought used).
Asus Strix x570-i
2 Tb Crucial mx500 and some 500 GB Nvme.
Corsair vengeance 3600 lpx
Hardware:
ASUS X570-I (if it ever becomes available)
AMD Ryzen 3700X
240mm AIO Liquid Cooling
32 GB 3600MHz RAM
Samsung 970 EVO Plus 1TB
SATA SSD 2TB
possibly additional SSDs
AMD RX 5700 XT (have not decided which one, yet; depends on macOS compatibility)
2 Noctua NF-A12x25/15 (depending on cooling needs and available space)
Corsair SF750
Software/OS:
macOS Catalina, Linux and Windows
This System is going to replace my 2013 27" iMac.
I never got an estimated shipping date. I put my order in July 22 and it got canceled because of the free shipping. I then put another order that same day and chose the $65.00 shipping but never got an estimated ship date, I ever checked the emails to see and nada.
I’m still unsure. So far bought only
Corsair DDR4 32GB c16
Samsung 970 evo m.2 1TB
Corsair H100i v2
Corsair sf600 platinum
As for cpu I was thinking about the ryzen 3000. And gpu wise no idea whatsoever for now
