NCASE M1 V6 info

Amonchakai

Average Stuffer
Jun 28, 2019
78
29
You both have the same motherboard? I would check the drivers first... Windows Update can do some weird things
 

Amonchakai

Average Stuffer
Jun 28, 2019
78
29
In which country are you living?

On the ncase website, there is some information :

If you are among the unfortunate countries, I am afraid that you will have to wait... Otherwise, if are in a different country than those, it is written "on time".
 
  • Like
Reactions: Plaklijm

MultiDoc

Airflow Optimizer
Bronze Supporter
Feb 2, 2018
247
160
Anyone have the Crosshair VIII Impact inside this case? My chipset temps are 77-78 degrees, is that too high?
I’m currently building mine with the Crosshair VIII Impact, but haven’t finished yet so can’t comment from my own experience. I have read some users though had high temps with this motherboard which later was found due to missing thermal pads under the VRM heat sink. So I’d suggest you check yours and see if they are there or not. If not buy some quality ones.
 

r3load3d

Minimal Tinkerer
New User
Jan 13, 2020
4
5
Anyone have the Crosshair VIII Impact inside this case? My chipset temps are 77-78 degrees, is that too high?
I recently finished a build with this board. My chipset temp is currently 69 degrees at idle, with the chipset and VRM fans both at 1600RPM, which is inaudible. Under a gaming load, the temperature increases to 71 degrees with about a 100RPM increase in fan speeds.

Cooling setup is a C14S with 140mm intake fan, rear 92mm intake, PSU mounted at the front (ATX position) and an Accelero 3 on the GPU with 2x 120mm exhaust fans.
 
  • Like
Reactions: schn1tt3r

paulesko

Airflow Optimizer
Jul 31, 2019
269
200
I recently finished a build with this board. My chipset temp is currently 69 degrees at idle, with the chipset and VRM fans both at 1600RPM, which is inaudible. Under a gaming load, the temperature increases to 71 degrees with about a 100RPM increase in fan speeds.

Cooling setup is a C14S with 140mm intake fan, rear 92mm intake, PSU mounted at the front (ATX position) and an Accelero 3 on the GPU with 2x 120mm exhaust fans.
I don´t understand those temps on such a high priced motherboard. I have a gigabyte x570 on a ncase and the chipset at idle is at 44 degrees right now, with the chipset fan OFF and take in mind that there is a gen IV nmve drive over the chipset which should worsen things... I have a radiator on the side of the case with fans blowing into the case at 850 rpm. My chipset only sees temps over 60 degrees while rendering with vray for hours, and since the chipset fan starts spining at 60º temps, it really doesn´t go over 64, I think i remember 66 degrees once and that´s the absolute maximum temps I´ve seen on the chipset.

I don´t know, I haven´t read much about this, but there is way too much difference. either my board doesn´t read temps poperly or theres some problems on that asus cooling.
 

Flurre

What's an ITX?
New User
Mar 24, 2020
1
6
1.Will NCASE produce more ODD panels once the current stock runs out? We have been having a curfew for more than a week, and frankly, i do not feel like spending money on my hobbies right now.

2.Has anyone ever tried switching to black top panel while the rest is silver? I know that it would make sense if the side and front panels were plain white, but still...
I just recived my set of black panels, got the silver v6 last year but wanted to switch things up. So i tried doing only black top and the rest silver, and i must say that i like it!

Took some photos of it with my phone (bare in mind im no master in photography😅) both in light and dark room with "night sight". Heres a link to the gallery
If anyone wants another combo, feel free to ask.
 

The_Mad_Madman

SFF Lingo Aficionado
Aug 5, 2019
104
18
Going technical with this question, is there any loss in audio quality if I connect headphones or speakers through my monitor audio jack?
 

r3load3d

Minimal Tinkerer
New User
Jan 13, 2020
4
5
I don´t understand those temps on such a high priced motherboard. I have a gigabyte x570 on a ncase and the chipset at idle is at 44 degrees right now, with the chipset fan OFF and take in mind that there is a gen IV nmve drive over the chipset which should worsen things... I have a radiator on the side of the case with fans blowing into the case at 850 rpm. My chipset only sees temps over 60 degrees while rendering with vray for hours, and since the chipset fan starts spining at 60º temps, it really doesn´t go over 64, I think i remember 66 degrees once and that´s the absolute maximum temps I´ve seen on the chipset.

I don´t know, I haven´t read much about this, but there is way too much difference. either my board doesn´t read temps poperly or theres some problems on that asus cooling.
According to this post, the thermal pads used on both Asus ITX boards are pretty terrible, and sometimes not even installed property. I have considered replacing mine, but it's not really worth it when the chipset fan is inaudible and the temps aren't causing any issues. I'm only running a Gen3 NVME drive, I'd be interested to see if there's a significant temperature difference with a Gen4.

I had a Gigabyte X570 Aorus Elite before I downsized to the Ncase and the chipset cooling was much better at around 60 degrees with the fan off. I would have bought the Gigabyte ITX board, except the socket placement meant my C14S wouldn't fit in the Ncase.

Going technical with this question, is there any loss in audio quality if I connect headphones or speakers through my monitor audio jack?
Your monitor takes a digital audio signal and converts that to an analog signal with a built in DAC. In every monitor I've used, the built in DAC has been pretty cheap and poor quality, so I wouldn't recommend it. Your motherboard's built in DAC is almost certainly going to be better.
 

3dl1r

Average Stuffer
Mar 6, 2019
72
17
I just recived my set of black panels, got the silver v6 last year but wanted to switch things up. So i tried doing only black top and the rest silver, and i must say that i like it!

Took some photos of it with my phone (bare in mind im no master in photography😅) both in light and dark room with "night sight". Heres a link to the gallery
If anyone wants another combo, feel free to ask.
I really appreciate it ! Also, really pleased you are enjoying it. Just a personal insight; the all black version is the best with rgb lighting.
 

schn1tt3r

Cable-Tie Ninja
Sep 24, 2018
148
241
I just recived my set of black panels, got the silver v6 last year but wanted to switch things up. So i tried doing only black top and the rest silver, and i must say that i like it!

Took some photos of it with my phone (bare in mind im no master in photography😅) both in light and dark room with "night sight". Heres a link to the gallery
If anyone wants another combo, feel free to ask.
Ok, I'm sold! Gonna go ahead and do that. Maybe front and top black could also look nice.
 

The_Mad_Madman

SFF Lingo Aficionado
Aug 5, 2019
104
18
Would you guys think that removing the Vega 56 blower shroud and placing 2 NF-A12X25 fans underneath would help with temps (and therefore noise) or there is no point to this?
 

andy66

Chassis Packer
Dec 17, 2019
19
18
Received my M1 a few days ago and completed my build yesterday. I'm using the following parts:

- i9 9900k
- Asus Z390I
- EVGA GTX 1080Ti SC Black Edition
- 2x 16GB DDR4 / 3000Mhz
- Corsair H100i v2 paired with 2x Noctua NF-F12 PWM
- Corsair SF750
- 250GB Samsung 960 Evo nvme
- 960GB Corsair MP510 nvme
- 2x Arctic F12 PWM PST as bottom intake
- 1x Noctua NF-A9x14 PWM (92mm) as back exhaust

Really happy with the build! CPU boost stays at 4.7GHZ all-core with temps of 59-68°C while gaming at 4k. Stress-testing the CPU is also very impressive, after 30min of prime95 (without AVX), CPU is still boosting to 4.7GHZ all-core. While gaming, it is very quiet. All in all, great case with much options and great cooling capability for such a form factor, i'm very happy! :)
 
  • Like
Reactions: Plaklijm and Qrash

Immanitas

Case Bender
New User
Mar 31, 2020
2
0
Just a little question about your delivering procedure. Why are you not able to send a package to germany while you are able to send them to syria and ukraine?!? DHL, UPS and GLS are still working, there is not a complete shutdown in this country. As far as i know you are able to deliver in countries while there is still a civil war ongoing. And btw. you still send them to Great Britain and in the US.
 

Necere

SFF Guru
Original poster
NCASE
Feb 22, 2015
1,578
3,052
Just a little question about your delivering procedure. Why are you not able to send a package to germany while you are able to send them to syria and ukraine?!? DHL, UPS and GLS are still working, there is not a complete shutdown in this country. As far as i know you are able to deliver in countries while there is still a civil war ongoing. And btw. you still send them to Great Britain and in the US.
Taiwan Post has suspended shipments to certain countries, you can see the most current list here. I don't know have any insight into TWPS's decisions.
 

Immanitas

Case Bender
New User
Mar 31, 2020
2
0
Taiwan Post has suspended shipments to certain countries, you can see the most current list here. I don't know have any insight into TWPS's decisions.
Okay, then it is like it is, but their decision is not understandable and doesnt base at evidence at all. Is there any possible option to send the case with a different delivery service, like DHL or UPS?
 

Necere

SFF Guru
Original poster
NCASE
Feb 22, 2015
1,578
3,052
Okay, then it is like it is, but their decision is not understandable and doesnt base at evidence at all. Is there any possible option to send the case with a different delivery service, like DHL or UPS?
No, unfortunately. W360 has looked into this, and he tells me the other companies that ship out of Taiwan require business shipping accounts for the volume we ship, which are limited to businesses registered in Taiwan (which NCASE is not).