Cooling ID-Cooling IS-47K 47mm 6-heatpipe cooler with 92x15mm fan - Black Ridge alternative?

[Valantar]

Compatibility will definitely be a thing (as with all coolers like this), but at least it looks pretty decent.

ID-COOLING Releases IS-47K 47mm Low Profile CPU Cooler

ID-COOLING today announced IS-47K low profile CPU air cooler, featuring only 47 mm total height, 6 copper heatpipes, copper base and a 92x92x15mm PWM fan. IS-47K is specially designed for high performance small form factor builds with a TDP up to 130 W. It is compatible with the mainstream CPU...

www.techpowerup.com

 

[rfarmer]

Compatibility will definitely be a thing (as with all coolers like this), but at least it looks pretty decent.

ID-COOLING Releases IS-47K 47mm Low Profile CPU Cooler

ID-COOLING today announced IS-47K low profile CPU air cooler, featuring only 47 mm total height, 6 copper heatpipes, copper base and a 92x92x15mm PWM fan. IS-47K is specially designed for high performance small form factor builds with a TDP up to 130 W. It is compatible with the mainstream CPU...

www.techpowerup.com

If you can install it in that orientation gives you the option of higher profile ram which I know will please a lot of people.

 

[thelaughingman]

If you can install it in that orientation gives you the option of higher profile ram which I know will please a lot of people.

let's see if it clears that stupid PCH fan block on the X570i Aorus ?

 

[Vlad502]

Spoiler: Old render

It looks like using similar to IS-30 slim fan in push (instead pull) configuration
Good there are mouting holes for standart 92mm fan

http://www.idcooling.com/Product/detail/id/205/name/IS-47K

Interesting why push is better than pull:

No mounting for 120mm fan:

It will be nice to include something like Prolimatech Samuel 17 fan mounting:

 

[loader963]

http://www.idcooling.com/Product/detail/id/205/name/IS-47K

Looks like a new competitor for the cryorig c7 and the black ridge cooler. Interested to see a review on it.

 

[IntoxicatedPuma]

Me too, looks almost identical to the black ridge, but I'm disappointed to see it doesn't have the option to mount a 120mm fan on top, I found that the 120mm fan makes a big difference on the Black Ridge. It looks like the same fan as the IS-30, which means it may be difficult to put a NF-A9x14 in place of it.

 

[CC Ricers]

Always nice to have more <50mm options for cooling. It could even be comparable to the Black Ridge.

 

[loader963]

Does id make the black ridge? I thought alphadon did but saw some posts on reddit that seemed like they though id did?

 

[thelaughingman]

Always nice to have more <50mm options for cooling. It could even be comparable to the Black Ridge.

fixed that for you

 

[ignsvn]

I'll just wait until someone purchase it & test it with various mobo to see whether there will be layout compatibility issues.

 

[tinyitx]

No 120mm mounting should not be a big problem. Zip ties are always cheap and available.

 

[tinyitx]

Suggestion to moderator:-

This thread and this (https://smallformfactor.net/forum/t...th-92x15mm-fan-black-ridge-alternative.13754/) might be merged.

 

[loader963]

Whoops. Thought I looked good enough and wasn't reposting. Hey @confusis could ya delete or merge the threads

 

[Thehack]

Me too, looks almost identical to the black ridge, but I'm disappointed to see it doesn't have the option to mount a 120mm fan on top, I found that the 120mm fan makes a big difference on the Black Ridge. It looks like the same fan as the IS-30, which means it may be difficult to put a NF-A9x14 in place of it.

The retail version will have a standard 92 mm fan, as far as I'm told. Concerning the 120 mm fan, there will be a second version that comes standard with the fan. The IS-47k will not have the mounting for the 120 mm fan out of the box, but it *is* designed for 120 mm fan as well.

No 120mm mounting should not be a big problem. Zip ties are always cheap and available.

There will be a 120 mm fan version, I'm told by ID-cooling. It is designed for it; not sure if the IS-47k will include the mount of the box.

 

[thelaughingman]

There will be a 120 mm fan version, I'm told by ID-cooling. It is designed for it; not sure if the IS-47k will include the mount of the box.

so there might be an IS-62K and/or IS-72K depending on the 120mm fan thickness?

 

[Thehack]

so there might be an IS-62K and/or IS-72K depending on the 120mm fan thickness?

Yes. There will be a standard 120 mm version later on. I just confirmed the IS-47k will not have 120 mm brackets at launch.

 

[Thehack]

Here is the current concept for 120 mm version. It is in progress. Will release in a couple of months. Included fan will be ARGB type.

 

[Hellow]

Lol at the 130W tdp rate with a 92mm fan

http://www.idcooling.com/Product/detail/id/205/name/IS-47K

 

[ExplodingWaffle101]

Feel like we need another 47mm shoot out- what with this, the c7cu, axp-90(cu), black ridge and probably some others- which one is actually the best (especially considering that the axp90 and c7 have better compatibility). would be nice to have this solved objectively once and for all (though i suspect some of the differences are in the realm of cooler to cooler variation)

 

[Mackan]

Here is the current concept for 120 mm version. It is in progress. Will release in a couple of months. Included fan will be ARGB type.

Yes, no fan clips and mounting by screw! Fantastic if it releases like this. I really don't like clips.

They should however make a black version of this cooler. Or better, copper, and then coated black.