another design of my Gcube using watercool cpu and enternal Vga BOX via PCI-e direct connection (8x or 16x i-pass pci-e extend card),but the shortcoming is the high quality pcie external cable is somehow expensive:
G-Unique Plug&Play DC-ATX Oversea Edition Preview
- Thread starter 1461748123
- Start date
the most highend DCatx i ever made,synced with an ROG impact controlled unit: all Kemet T530 KM polymer tatuniums ,all panasonic SEPF/SVPF OSCONs,all WE larg current main inductors
soldered two flat heat pipes to spread out the heat over the whole pcb and the aluminium back plate,also the heatpipes act as conductor of the large current.
soldered two flat heat pipes to spread out the heat over the whole pcb and the aluminium back plate,also the heatpipes act as conductor of the large current.
Oh my, but pardon my french that is one bad ass DC ATX! Absolutely amazing.the most highend DCatx i ever made,synced with an ROG impact controlled unit: all Kemet T530 KM polymer tatuniums ,all panasonic SEPF/SVPF OSCONs,all WE larg current main inductors
my kilo watts grade monster power DCATX,it has 3ways 12V outputs each way has 30A current，two ways 5V outputs For SSD/NAS.can easily cofigurated to 4ways 12V & 1 way 5V outputs.
can accept 14-28v input，this sample is a 15V-input one build to order.
can accept 14-28v input，this sample is a 15V-input one build to order.
Last edited:
my kilo watts grade monster power DCATX,3ways 12V outputs each way has 30A current:
Okay, @guryhwa needs to be banned now for posting SFF PSU porn!
NSFW = Not Safe For Wallet
another porn is coming~~~：
a special designed asrock X99 itx dedicated 24pin type 500watts DC psu for lian-li TU110 case with sfx panel:
can you get it?
the 24pin type dcatx,two way 5v/3.3v & 5phases interleaved 12V up to 50A current:
lots of top grade components:
wow:
wow again:
heat sink for 12V mosfets:
cpu plug:
sorry for i screwed up the light...
Now that is an amazing plugless implementation. As far as space usage goes, that's probably about the best you can do. Nicely done.
There is so much awesome in this thread but not a single link to "Buy it now".
Where is the US storefront?
If not available now, when?
Will there be a detailed configurator?
How can us lowly peasants get our hands on these units?
Where is the US storefront?
If not available now, when?
Will there be a detailed configurator?
How can us lowly peasants get our hands on these units?
Last edited:
every modular cables PSU and non modular cables PSU(ATX SFX TFX FLEX CFX LFX)can use my little cable-killed toolkit greatly simplified the bunch of 24pin MB cables .
just connect the 5vsb ,ps-on,one or two 12Vpins to de PSU,then it will sync with the PSU,and supply power for MB.the theory is ,it turns large 5V&3.3V current to relatively small 12V current that doesn't need lot of cables.
just connect the 5vsb ,ps-on,one or two 12Vpins to de PSU,then it will sync with the PSU,and supply power for MB.the theory is ,it turns large 5V&3.3V current to relatively small 12V current that doesn't need lot of cables.
Last edited:
I think you could sell a lot of those units. F 24 pin cables seriously.
modification of the air vent on top cover,there is also a power-on switch and LED indicator：
it provides 4 usb 3.0 front ports:
Gcube is somekind of Vertical air ducting , the cold air is sucked from the bottom opening of the case ,and blew to rad becamed hot air,then exhauted through the vent on top cover and upper back panel.
LOllll
it provides 4 usb 3.0 front ports:
Gcube is somekind of Vertical air ducting , the cold air is sucked from the bottom opening of the case ,and blew to rad becamed hot air,then exhauted through the vent on top cover and upper back panel.
LOllll
Hoho guys, pre-ordering is opened! Head over to this thread to learn more!
Are you going to start selling some of the other cool stuff, like the SFX mounted slim PSUs?
Hey @guryhwa, would you consider making internal AC-DC PSUs as well? I like the picoPSU/HDPlex style small DC-DC PSUs, but don't much care for having a laptop power brick outside the case (especially since they aren't made to take the peak currents you find in desktop computers since laptops handle that by drawing the excess power from the batteries). I know I can stuff a brick inside the case and tape/glue it on, but I prefer purpose built stuff designed for an enclosed space.
All I've seen for internal AC-DC is HDPlex offerings and those are 19V if I am not mistaken. With you advertising this PicoPSU style DC-DC PSU, I was wondering if it would be possible to make an AC-DC PSU that fits in an SFX PSU mount, but isn't anywhere near as deep and can be connected to the separate DC-DC unit.
All I've seen for internal AC-DC is HDPlex offerings and those are 19V if I am not mistaken. With you advertising this PicoPSU style DC-DC PSU, I was wondering if it would be possible to make an AC-DC PSU that fits in an SFX PSU mount, but isn't anywhere near as deep and can be connected to the separate DC-DC unit.
... just wow ... everything. So beautiful. Thank you @guryhwa .
@guryhwa am I understanding correctly that the PCB panel structure of the Gcube is also used as a power distribution plane? That's awesome!
Curiosity
Too busy figuring out if I can to think if I shoul
Platinum Supporter
Bronze Supporter
M...M...M...M...Multi-Tier...Subscriber...
- Apr 30, 2016
- 724
- 838
WOW
Not sure how I managed to miss this thread, but I think I need myself one of these for my move into the S4!
they look amazing, great work.
Not sure how I managed to miss this thread, but I think I need myself one of these for my move into the S4!
they look amazing, great work.
Last edited:
Moved to Custom Cases & Projects section now that the preorder thread is up in the Vendor Marketplace.
Similar threads
- Poll
