Production FormD T1 Classic (READ FIRST POST)

[rOy_bOy]

So if you guys were gonna go with a 2+ slot card (req. 3 slot position on Sidearm) and you were gonna go with a 120mm AIO for the CPU, then what AIO would you go with for a Ryzen 3600 overclocked?

 

[Navic]

So if you guys were gonna go with a 2+ slot card (req. 3 slot position on Sidearm) and you were gonna go with a 120mm AIO for the CPU, then what AIO would you go with for a Ryzen 3600 overclocked?

I would think the Corsair h60 2018 would be enough, if you can stand the bright white lights on the pump. Waha has also done some testing with the h60 2018, so you can find that in here.

My overclocked 1600 draws about 100w under a full render load if HW monitor is to be believed, about the same wattage as an overclocked 3600 (going off of GamersNexus), so when I get the h60 I can tell you how it performs if I remember

 

[thobart]

Securefirm fits w/o problems? Will find it, cause now cooler fit w/o back bracket

Yep ?

 

[Rapide]

Yep

If u will upload some photos it will be nice, I think it will help not only me

 

[thobart]

If u will upload some photos it will be nice, I think it will help not only me

Will do, photo’s of anything more specific? Anyone know the best way to post photos to the forum? Some posts don't turn out well, especially on mobile.

 

[paulesko]

With the phone, what I do is upload to imgur and then paste here the link to the album.

 

[thobart]

The build shown is my intimation of a future Sidearm build but in a Louqe Ghost and a large top hat located on the bottom of the case. I took a couple photos of the how I used the SecuFirm mount. I got my inspiration for this approach from @Wahaha360 and his testing with all the coolers. He mentioned the Secufirm was used. I used the included bracket with Alphacool LT240 that slides onto the pump block, allowing you to mount the cooler (I hate this btw). I used the black Secufirm bracket with the built in screws and the black Noctua spacers and then slightly screwed on each end till all the screws we’re able to grab the thread of the Secufirm bracket. I added a photo of a Secufirm kit from amazon to give people a good idea of what’s included and what was used. Let me know if there are any questions and even suggestions. I am still learning and I love to learn new tips about all things computers!

 

[Wahaha360]

That's what I thought, just trying to be clear because I thought the PSU would be flipped as well.

Yes, flippable.

 

[Wahaha360]

First time i got problems with cooler. Worst thing in Eisbaer Lt240. I got a lot of problems with this.

This is basically our complaint to Alphacool.

I also found the included mount to be awful. Ended up using a noctua secufirm2.

It's what I'm using too.


If we had to offer the LT240 somehow, need to swap out the default mounting kit.

 

[Rapide]

@Wahaha360 do you have any photos with lt240 installed in T1?

 

[rOy_bOy]

@Wahaha360 So, it's my birthday this week. Just sayin'....

 

[notbitcoin]

@Wahaha360 do you have any photos with lt240 installed in T1?

OptimumTech has a glance shot of it installed in his video of Prototype 1.

 

[Rapide]

@notbitcoin I mean stock lt240, w/o custom tubing. I hope it will fit

 

[schn1tt3r]

OptimumTech has a glance shot of it installed in his video of Prototype 1.

Is there a picture where the stock tubes are used? The tubes that come with the LT240 are way longer and stiffer than those on the picture, now I'm concerned.

 

[Rapide]

Can I overclock t1 for fit this?

 

[Dapoktan]

Has the initial run gone on sale yet? I'm not sure if I missed it or not and sfflab isn't very clear if it's sold out or unavailable..

 

[thekinghippo]

Has the initial run gone on sale yet? I'm not sure if I missed it or not and sfflab isn't very clear if it's sold out or unavailable..

It hasn't. Sign up for the email list and you can be in the first batch. Theoretically, Wahaha was hopeful for a September release and there's only about a week left so keep your eyes peeled. It wouldn't surprise me if it was pushed into October at this point though. I'm just hoping we get to see real pictures of the tempered glass on it before the sale goes live.

 

[pwnedundies]

@chyll2 @chinyang @Wildmongoose @Metroversal @Brude27 @JayRello @sffman @prava @PBJ @GerryMz @Beardedswede @Bonusround @schn1tt3r @Navic

This is the current *plan, things happens, so can't promise
Year 2019:
- $200 Black *base version, Ultrafine Mesh Side Panels, NO I/O, August 2019 if Quality Control perfect, most likely September 2019
- $240 Two Tone Version, Tempered Glass Side Panel (SFX fan facing inside the case), I/O, December 2019

Year 2020:
- Silver Aluminum Side Panels with holes
- Black Aluminum Side panels with holes
- Silver Ultrafine Mesh Side Panels
- Black I/O Front Lid for Black *base version
- Silver NO I/O Front Lid for Two Tone version

Some of you will notice that the Two Tone version with TG Side Panels should make temperature worse, and you will be correct. This is why I added 240x25mm thick radiator support so you can still get <85C with TG keeping CPU OC < 160W. For those of you that want to mix different Side Panels types, you can in 2020.

It hasn't. Sign up for the email list and you can be in the first batch. Theoretically, Wahaha was hopeful for a September release and there's only about a week left so keep your eyes peeled. It wouldn't surprise me if it was pushed into October at this point though. I'm just hoping we get to see real pictures of the tempered glass on it before the sale goes live.

Back in August the plan was that the tempered glass variant wouldn't release until December. I could have missed something but it still looking that way from what I know from this thread.

I've been wondering who is doing the video review? Is there a particular YouTuber we should keep an eye on? I know Ali from Optimumtech was the one who showed off the prototype.

 

[hetvler]

Back in August the plan was that the tempered glass variant wouldn't release until December. I could have missed something but it still looking that way from what I know from this thread.

I've been wondering who is doing the video review? Is there a particular YouTuber we should keep an eye on? I know Ali from Optimumtech was the one who showed off the prototype.

I would assume Optimumtech as he did the review of the first prototype

I would assume further that the first post will be updated with the link to the review whenever it is live.

 

[invariants]

I noticed in the pictures there are 4 standoffs for the radiator. If I were to air cool and wanted extra case fans would the lack of standoffs in the middle affect anything?