Production FormD T1 Classic (READ FIRST POST)

[PKAWA]

You can buy one low profile on Aliexpress
Power Cable

Thanks man! I've immediately ordered two.

@hetvler, I've ordered a 5900x as well but we'll see when it arrives. I need it around march.

 

[manoueltiger]

Canceled my 5800x preorder after seeing it runs much hotter than the 5900x. RIP my place in line, now to hunt for a 5900x lol.

Lol ! I made the same choice.
and the 5800x has almost the same power consumption !!!

 

[dream3]

Latest batch here came with mesh sides panels slightly bent in different areas. Really not satisfied with this level of finish. What is the best way to contact them for replacement?

 

[PKAWA]

Latest batch here came with mesh sides panels slightly bent in different areas. Really not satisfied with this level of finish. What is the best way to contact them for replacement?

Just send them an e-mail with your order number and pictures of the damage.

 

[hetvler]

Lol ! I made the same choice.
and the 5800x has almost the same power consumption !!!

Well actually after looking at benchmarks i think i was getting suckered by workloads I'll never actually utilize. I've opted for the 5600x now haha. Seems the be more than plenty for 1440p gaming and making the occasional meme in photoshop.

 

[birdsliveoutthere]

Thanks man! I've immediately ordered two.

@hetvler, I've ordered a 5900x as well but we'll see when it arrives. I need it around march.

Which option(s) did you pick?

 

[PKAWA]

The chip... and the box!


Formd T1 in black and silver for the december batch
Dynavox silver case feet
Asus x570-i
Nouvolo Aquanaut
EK DDC 3.2 pwm + heatsink
G.skill 32gb ram cl16 3600mhz
Coolworld 240mm radiator
2 Adata 2tb nvme m.2 ssd's
Corsair SF750
AMD 5900x
2 slim noctua fans because I currently have one, and the other one is making to much of a racket for my taste.
New power cable that will allow me to use the port on the back to connect the rad permanently, and give me more space for copper tubing.
IF i can manage to make it work, but currently recovering from corona so can't do anything atm.

And I'm planning on buying the 6900xt to go with it.

 

[Mao_Setzer]

The chip... and the box!


Formd T1 in black and silver for the december batch
Dynavox silver case feet
Asus x570-i
Nouvolo Aquanaut
EK DDC 3.2 pwm + heatsink
G.skill 32gb ram cl16 3600mhz
Coolworld 240mm radiator
2 Adata 2tb nvme m.2 ssd's
Corsair SF750
AMD 5900x
2 slim noctua fans because I currently have one, and the other one is making to much of a racket for my taste.
New power cable that will allow me to use the port on the back to connect the rad permanently, and give me more space for copper tubing.
IF i can manage to make it work, but currently recovering from corona so can't do anything atm.

And I'm planning on buying the 6900xt to go with it.

Curious to see the final result with all those parts PS: you didn't choose or have a GPU ?
Get well, Stay safe and always wash your hands !!

 

[birdsliveoutthere]

@PKAWA I meant which option did you pick for the low profile power cable?

 

[PKAWA]

@PKAWA I meant which option did you pick for the low profile power cable?

I'm going with the cable that's also used in the acat x1

US $9.49 |Computer Case Extension Cord Power 90 degree Elbow Extension Cord Tinned Wire A4 Case Dedicated Male And Female Aluminum Version|Power Cords & Extension Cords| - AliExpress

Smarter Shopping, Better Living! Aliexpress.com

www.aliexpress.com

I'll be using the forward version so that the cables will be routed towards the gpu.
But with a different connection for the backplate of the case

0.13US $ 13% OFF|250VAC 10A AC power socket C14 Inlet Voedingscontact Connector Plug Industriële socket Plug IEC320 C14 3Pin Panel Power Inlaat socket|Connectoren| - AliExpress

Smarter Shopping, Better Living! Aliexpress.com

nl.aliexpress.com

 

[J-R]

Will the T1 be updated to accommodate longer RTX cards?

 

[fabio]

Will the T1 be updated to accommodate longer RTX cards?

Why? In the case will be not anymore a T1

 

[PKAWA]

Will the T1 be updated to accommodate longer RTX cards?

Ofcourse not. Basically everything would need to be made longer so that is such a high cost that they'll never do that.
And the P1 is already on the table, so i think that would be your best bet.
I think that will take another year though.

 

[PKAWA]

Happy to report that there is room for 12mm copper tubing as I hoped.

 

[manoueltiger]

Happy to report that there is room for 12mm copper tubing as I hoped.

euh ... Do you know your tubing will pass through the GPU ?

 

[Speedster]

euh ... Do you know your tubing will pass through the GPU ?

The GPU is behind the motherboard in the T1. The riser cable might get in the way but it's not a big wall like a GPU would be.

 

[PKAWA]

euh ... Do you know your tubing will pass through the GPU ?

Yes, but i also bought a drill bit so it will be alright. Just need to be careful drilling the hole in the gpu.

 

[ciaran clare]

Yes, but i also bought a drill bit so it will be alright. Just need to be careful drilling the hole in the gpu.

I had troubles drilling through my GPU, after drilling through the PCB and the heat sink i tried to boot my card.... it refused to turn on, i have a feeling drilling through the heat sink meant my GPU thermal throttled and doesn't power on. If your water cooling though this shouldn't matter and you can just drill straight through the PCB without any issues.

 

[hetvler]

Sapphire nitro + is a big boy but looks like it fits!


2.7 slot, ATX
Dimension: 310(L)X 134.3(W)X 55.3 (H)mm

 

[hetvler]

• Minimum 850 Watt Power Suppl
• 
  big oof.