Production FormD T1 Classic (READ FIRST POST)

[AMv8-1day]

Manufacturing won't be a problem. We will have color boards and sandblast samples prepared for the anodizing company before every bunch. We'll also have a person (friend) in the factory making sure everything goes correctly.

What if I WANT a metal tie-dye case?
:-P

 

[Beardedswede]

Any tip of i wanna watercool my card. 2 slot size.
Is there any AIO 120mm that would work in this case?

 

[Wahaha360]

Any tip of i wanna watercool my card. 2 slot size.
Is there any AIO 120mm that would work in this case?

As in air cooling CPU and WC GPU on a 120mm Radiator?

 

[Beardedswede]

As in air cooling CPU and WC GPU on a 120mm Radiator?

exactly thinking that. Myabe stupid idea...
buying a cheeper 5700 XT and watercool it. becouse there is only the AMD one and 2,5 slot 3 party variants. and I have the 70mm Noctua cooler

 

[riba2233]

exactly thinking that. Myabe stupid idea...
buying a cheeper 5700 XT and watercool it. becouse there is only the AMD one and 2,5 slot 3 party variants. and I have the 70mm Noctua cooler

Asrock and Power color have 2slot models, powercolor has 2 even.

 

[Beardedswede]

Asrock and Power color have 2slot models, powercolor has 2 even.

well i dont wanna have the single fan, super noisy GPU. Have not seen any dual fan with 2 slot so far. EDIT: yeah found a asrock 2 slot dual fan card.

 

[riba2233]

well i dont wanna have the single fan, super noisy GPU. Have not seen any dual fan with 2 slot so far. EDIT: yeah found a asrock 2 slot dual fan card.

Yeah sorry, I was thinking of models with two fans, non reference ones.

 

[gwertheim]

What if I WANT a metal tie-dye case?
:-P

Find a local paint shop.

If I have the money at the time, I'm planning a two tone roadster paint job

 

[Sashby]

The ADT PCIe 3.0 should be included with the *base version. Since most gaming GPUs will not benefit from PCIe 4.0.

Afaik, the 3M is not officially compatible with PCIe 4.0, and there are no PCIe 4.0 ready flexible riser on the market.

However, I been told 3M PCIe flex riser seems to be plug & play on X570, so it’s the closest thing to PCIe 4.0 compatible.

The downside of 3M riser is the price.

ADT released their updated riser cable to PCIe Gen 4 (R33UF-V4)! All is not lost

ADT Graphics Extension Cable PCI-E x16 4.0 Compatible ITX A4 Chassis PCIE 16x GEN 4.0 Full Speed

 

[Bonusround]

ADT released their updated riser cable to PCIe Gen 4 (R33UF-V4)! All is not lost

ADT Graphics Extension Cable PCI-E x16 4.0 Compatible ITX A4 Chassis PCIE 16x GEN 4.0 Full Speed

The cable pictured doesn’t look long enough to reach in a sandwich style layout.

 

[Sashby]

The cable pictured doesn’t look long enough to reach in a sandwich style layout.

The listing is for custom length. If you're refering to the 3D image, it's only illustrative. Scroll down to the list of cases and cable length. It's the same cable design that the "(Dancase A4-SFX V3) A4 case layout" (sandwich) uses.
"DAN Cases A4-SFX V3 R33UF-TU (PCIe GEN 3.0) 18.5cm"

 

[Wahaha360]

 

[Shinken1]

I like the mesh, works well with the black case.
Is there any news on distribution to the UK? - Would I be able to pick up one if you launched in September as planned?

 

[Navic]

What's the reason for removing the indent from the mesh? I think I like it better with the indent. Still looks good though!

 

[pwnedundies]

What's the reason for removing the indent from the mesh? I think I like it better with the indent. Still looks good though!

Production - FormD T1 Classic (READ FIRST POST)

Now I look at it again on a pc, I personally prefer the front split line is located at that radiator portion (lower), but that messes up the golden ration mentioned earlier. I actually prefer no line at all, lol. I am a minimalist. I like the mesh idea, I didn't see the indent while I was on...

smallformfactor.net

Are you talking about the framing? I like both but, personally, this new version looks way cleaner.

 

[PBJ]

What's the reason for removing the indent from the mesh? I think I like it better with the indent. Still looks good though!

Production - FormD T1 Classic (READ FIRST POST)

Now I look at it again on a pc, I personally prefer the front split line is located at that radiator portion (lower), but that messes up the golden ration mentioned earlier. I actually prefer no line at all, lol. I am a minimalist. I like the mesh idea, I didn't see the indent while I was on...

smallformfactor.net

Are you talking about the framing? I like both but, personally, this new version looks way cleaner.

At first I thought I liked the mesh with the indent better but looking at both pictures side by side, no indent goes better with the minimalist design of the case imo.

Also, is it me, or is the case gray in these latest renders?

 

[oreg]

Color in the latest renders look awesome. Will this be the color of base version?

I also like it more without the indented mesh. Would this have negative impact on sturdiness?

And, most important: Will there be possibility to buy from Germany?

 

[Wahaha360]

What's the reason for removing the indent from the mesh? I think I like it better with the indent. Still looks good though!

I also like it more without the indented mesh. Would this have negative impact on sturdiness?

We are sampling without indent on the mesh right now. If it has too much flex, we will make the indent to strengthen it.

Color in the latest renders look awesome. Will this be the color of base version?

Also, is it me, or is the case gray in these latest renders?

Variation on renderer lighting made it more of a dark gray look.

 

[Alex Atlas]

Hi @Wahaha360,
I have the same question as @Shinken1 - would this case be available in the UK? If not, would there be an option to deliver it to the UK? Looking forward to buying it as soon as it's available.

 

[schn1tt3r]

I'm in love with the no indent mesh. I rather buy more mesh sides if the one I originally get bends than have indent.