Production FormD T1 Classic (READ FIRST POST)

[Gerold]

so what? I'm sure you can find out what's the difference in width if you go for the three-slot config.
same rule applies: take the cpu cooler clearance and add around 5mm (or better a little less to be safe).

 

[Speedster]

so what?

Merely pointing out to consider the lower clearance if using a thicker GPU. No need to snap.

 

[Gerold]

Merely pointing out that with a little own initiative you can easily figure that calculation out.
I even delivered the basic equation, just swap the words with the actual numbers.
No snapping happening.

Didn't interpret your "That's for two-slot GPU configuration..." as a helpful addition to my post above, I'm sorry.
Instead it felt a little like complaining.

 

[Dahatsi]

After reading and lurking this thread for about 3 months now it is still not clear to me if the Power button is included ? and were to buy it or if it uses Standard dimensions

 

[PBJ]

After reading and lurking this thread for about 3 months now it is still not clear to me if the Power button is included ? and were to buy it or if it uses Standard dimensions

Yes, it will be included inside the T1 box. Test shippers didn’t get it initially because of delays due to the pandemic.

 

[gwertheim]

After reading and lurking this thread for about 3 months now it is still not clear to me if the Power button is included ? and were to buy it or if it uses Standard dimensions

If you want, pslate sells them already assembled and sleeved

 

[Navic]

If you want, pslate sells them already assembled and sleeved

I will note for the pslate power button, that it is a bit long, and while this isn't a problem if you're using a 120mm radiator, it can be a problem for longer 240mm radiators. It's about 45mm long for context.
If this isn't a problem for you, then they are very high quality and I do recommend them.

 

[gwertheim]

I will note for the pslate power button, that it is a bit long, and while this isn't a problem if you're using a 120mm radiator, it can be a problem for longer 240mm radiators. It's about 45mm long for context.
If this isn't a problem for you, then they are very high quality and I do recommend them.

What length would you recommend? I'll ask @pslate if he can add that option to his website

 

[xkruz]

Finally done building 1 setup ?
This is one of many plans to test the formd t1

FormD t1 Build Log
Will post temp later

 

[wallsofjericho]

Finally done building 1 setup ?
This is one of many plans to test the formd t1

FormD t1 Build Log
Will post temp later

Nice build ?
I smiled about the cable part ?
Do you plan to undervolt the gpu? I am very eager to see your temps of the 2080ti under (gaming) load.

 

[Goksal]

Hello I want to buy the product, how can I buy ?

 

[gwertheim]

Hello I want to buy the product, how can I buy ?

Read the first post and wait for the announcement about when they go on sale

 

[Brude27]

Finally done building 1 setup ?
This is one of many plans to test the formd t1

FormD t1 Build Log
Will post temp later

Beautiful photos! I still can’t get enough of seeing this case filmed/photographed nicely even though I have one lol.

 

[graemeduncan]

Beautiful photos! I still can’t get enough of seeing this case filmed/photographed nicely even though I have one lol.

When I get mine I'm going to be doing a full cinematic build video! So excited for it ?

 

[Killdoc]

Finally done building 1 setup ?
This is one of many plans to test the formd t1

FormD t1 Build Log
Will post temp later

Your setup and mine should be fairly similar. I have the same motherboard, CPU and power supply. My 2080Ti is an EVGA Black, my memory sticks are GSkills, and I just received a LT 240 solo. Really want to know your temps!!!!!

 

[hetvler]

Can we get all the builds added to the first message moving forward? It would be nice to have a repo of all the possibilities in this thing.

Maybe not of all you psychos trying a million cooling configs but just the people showing off the completed builds.

AKA I'm looking for a build to show my friend to try and get him to buy the case as well but I can't find the one I'm looking for lol

 

[Navic]

What length would you recommend? I'll ask @pslate if he can add that option to his website

Anything below 35mm for the entire thing (excluding the wires) should be good, because that's about how long the power cable extension thing is. The shorter, the better. This is the power button I bought from him, and this is what mine looks like. Part of the button and the wire is actually going into the indent in the corner of the fan. Maybe the grey thing can be shortened a bit, because I dont see that in his photos.

 

[gwertheim]

Anything below 35mm for the entire thing (excluding the wires) should be good, because that's about how long the power cable extension thing is. The shorter, the better. This is the power button I bought from him, and this is what mine looks like. Part of the button and the wire is actually going into the indent in the corner of the fan. Maybe the grey thing can be shortened a bit, because I dont see that in his photos.

I ordered the same one and I mentioned in the comments when ordering it's for the T1 so it should be ok

I sent him a message with your recommendation, since he has the case he can measure it too.

 

[Zodeus]

Pssst, Corsair.com has restocked SF series PSUs. Grabbed an SF750. If you join the mailing list you can get 10% off as well.

Thank you for this! Amazon canceled my SF600 order, but Corsair still has them in stock

 

[xkruz]

Nice build ?
I smiled about the cable part ?
Do you plan to undervolt the gpu? I am very eager to see your temps of the 2080ti under (gaming) load.

Thank you, I've done a quick test and the CPU max temp were 75°C (4.8ghz OC) and GPU 79°C

Beautiful photos! I still can’t get enough of seeing this case filmed/photographed nicely even though I have one lol.

Thank you! This is my first time photographing product other than food ?

Your setup and mine should be fairly similar. I have the same motherboard, CPU and power supply. My 2080Ti is an EVGA Black, my memory sticks are GSkills, and I just received a LT 240 solo. Really want to know your temps!!!!!

I've done a quick test and the CPU max temp were 75°C (4.8ghz OC) and GPU 79°C I think I should undervolt the 2080ti