Production FormD T1 Classic (READ FIRST POST)

[Cronos83]

Which one?

The DC-LT with the mounted reservoir.
I can't find the combined outer dimensions... the pump goes into the reservoir if I'm not mistaking, so I can not simply ad the thickness of pump and reservoir...

I'm asking because I was wondering whether that combination would fit in the graphics card section in 3 Slot mode with a short 17cm or 19cm itx graphics card.
Or maybe even with a 24cm long card...

If I had a case I would check myself, but... yeah you know

 

[fabio]

The PART 2 is online!!

FormD T1 - 9.5L with UNLIMITED space!! - 3950X+64GB Ram+2GPUs - TITAN V FULL watercooled+TITAN RTX!! Fill the void 2.0

And again, here we are!! After 1 year and a half from my 2nd build (BTW, CHECK IT HERE if you didn't) I've moved part of it with new addition in a smaller case: THE FormD T1 !! This case is a small CNCed Aluminum jewel! I am so happy to got the possibility to be in the test shipping phase...

smallformfactor.net

 

[fabio]

The DC-LT with the mounted reservoir.
I can't find the combined outer dimensions... the pump goes into the reservoir if I'm not mistaking, so I can not simply ad the thickness of pump and reservoir...

I'm asking because I was wondering whether that combination would fit in the graphics card section in 3 Slot mode with a short 17cm or 19cm itx graphics card.
Or maybe even with a 24cm long card...

If I had a case I would check myself, but... yeah you know

So, the Reservoir https://www.aquatuning.co.uk/water-...24196/alphacool-eisstation-40-dc-lt-reservoir

plus the pump https://www.aquatuning.co.uk/water-...ool-dc-lt-2600-ultra-low-noise-ceramic-12v-dc

mounted have total dimensions: 60x40x47mm

 

[max31092]

@fabio
Thank you for your insight on the dimensions für the 2,5".
Just ordered the 5TB Seagate. I hope I'll soon be able to get a case and can test if it fits.

 

[fabio]

@fabio
Thank you for your insight on the dimensions für the 2,5".
Just ordered the 5TB Seagate. I hope I'll soon be able to get a case and can test if it fits.

Cool!! I can give you the rough space tomorrow! I just have to measure the thread space ??

 

[minininjatriforceman]

Will you be making a video on how to put together the case?

 

[fabio]

Will you be making a video on how to put together the case?

Oh no, I wish I was able to do it! Not really a video maker, and during the week I work!
But the Optimun Tech one+manual+this thread and my build logs, are more than enough!

 

[eozef]

Hey there, is there any chance that I could get one, I am from Sydney, Australia. Cheers

 

[ManaNeko]

Hey there, is there any chance that I could get one, I am from Sydney, Australia. Cheers

No.

 

[nicholasmark]

Hey there, is there any chance that I could get one, I am from Sydney, Australia. Cheers

Please read the first page of this thread, all the info you need are right there.

 

[tinyitx]

Hey there, is there any chance that I could get one, I am from Sydney, Australia. Cheers

No.

Not just no chance from Sydney, Australia but from the rest of the world as well.

As the cases are manufactured in China, the current stock is available through QQ to people in China as the postal system is pretty much so screwed up that delivery to other country means extensive delay. And according to posters in Chiphell, ordering through QQ has been suspended last week as an inventory check is being carried out, perhaps wanting to confirm if the stock is enough cover the 300+ orders placed through QQ.

Do not feel bad. Relax and plan your T1v1.1 in the meantime.

 

[eozef]

Not just no chance from Sydney, Australia but from the rest of the world as well.

As the cases are manufactured in China, the current stock is available through QQ to people in China as the postal system is pretty much so screwed up that delivery to other country means extensive delay. And according to posters in Chiphell, ordering through QQ has been suspended last week as an inventory check is being carried out, perhaps wanting to confirm if the stock is enough cover the 300+ orders placed through QQ.

Do not feel bad. Relax and plan your T1v1.1 in the meantime.

what a shame. I will take that I guess.

 

[kazuma86]

Not just no chance from Sydney, Australia but from the rest of the world as well.

As the cases are manufactured in China, the current stock is available through QQ to people in China as the postal system is pretty much so screwed up that delivery to other country means extensive delay. And according to posters in Chiphell, ordering through QQ has been suspended last week as an inventory check is being carried out, perhaps wanting to confirm if the stock is enough cover the 300+ orders placed through QQ.

Do not feel bad. Relax and plan your T1v1.1 in the meantime.

Yup, try to join over 4 days, No approve at ll. I think i will be wait and hope this situation going better ASAP.

 

[tyen]

Anyone have any thoughts about how to go about mounting this 120x15mm fan over the motherboard?

In the photo it's mounted on a old 3d printed base I made for an older project. I don't have that 3d printer any more but am thinking that it may make sense to design one specifically for this case.

 

[tinyitx]

Some video review/build process:-

https://www.bilibili.com/video/BV1uz411b74N?from=search&seid=5030727158635136073

https://www.bilibili.com/video/BV1U541147X4?from=search&seid=5030727158635136073

 

[chyll2]

Some video review/build process:-

https://www.bilibili.com/video/BV1uz411b74N?from=search&seid=5030727158635136073

https://www.bilibili.com/video/BV1U541147X4?from=search&seid=5030727158635136073

only watched the first video, he tried to flexed the mesh panel. It basically demonstrated how it handle stress. It is sturdy enough

 

[Cronos83]

Anyone have any thoughts about how to go about mounting this 120x15mm fan over the motherboard?

Maybe you can attach a piece of wood to the 3d printed fan mounting bracket. Than somehow use the ventilation holes in the bottom of the case to mount the wood... like a stand for the fan bracket....

Or maybe a L-shaped metal bracket that can be attached to the fan bracket and the ventilation holes of the case...

...or... wait for it.... zip ties ?

 

[jrvd007]

...or... wait for it.... zip ties ?

I believe you mean tweezers.

 

[Cronos83]

No... i actually meant zip ties.
They work pretty well to install fans in positions like that.

 

[forestpatrol]

No... i actually meant zip ties.
Hey work pretty well to install fans in positions like that.

I think @jrvd007 was making a joke referencing the verge's pc building video.