-
Save 15% on ALL SFF Network merch, until Dec 31st! Use code SFF2024 at checkout. Click here!
DAN C4-SFX
- Thread starter dondan
- Start date
Personally i like the position of the c port as it is in the a4-sfx, at the side it breaks the simetry...the logo can stay on the other side.Here is a preview how it could look like if I go for top i/o with only a logo at the front.
Rendering:
Looking sharp with that logo! Looking forward to it in black ?Here is a preview how it could look like if I go for top i/o with only a logo at the front.
Rendering:
Is this potentially a radiator for the CPU on the bottom with an aircooled GPU on the side? If so, and if the CPU can adequately be cooled this way, this looks like a killer config!Indirect cooling of a GPU in sandwich mode:
@Sh0ckwaveFlash Yes you are right a 240mm AIO with 2x slim 120mm fans for the CPU and for example a 3 Slot GPU with removed fans replaced by 2x120mm ones.
I Like it, hopefully the Top I/O will be spaced out as I suggested previously.Here is a preview how it could look like if I go for top i/o with only a logo at the front.
Rendering:
How's the poll going?
@dondan in the sandwich layout image on the first page with the 240mm radiator mounted in the bottom, is the vertical PCIe mount completely covering the left fan? If so, would it be possible to perforate the metal so the bottom radiator could be used as intake without trapping the hot air under the bracket?
Last edited:
Suggestion to @dondan: don't publicly share the poll results. With the survey you have consulted us, your fans and prospective customers, to gather our feedback. But the final decisions are yours, and that's all I feel you need to share. Just my $.02.
@Bonusround This was also my plan. I will write some words in the next days about the survey after I ordered the prototype in the next days.
@Jeydub It will not cover the fan but it will be above the fan. Between PCB and fan there will be 15mm. This is enough room so the air can travel around it.
@Jeydub It will not cover the fan but it will be above the fan. Between PCB and fan there will be 15mm. This is enough room so the air can travel around it.
Wait, so once again you won't be able to use full size fans for the 24cm AIO? What a shame.
We are entering the prototye state. I ordered two samples on friday.
Not for the usage I'm planning. If width gets over 135mm I would prefer the NCase M1 or the Ghost S1
As you can read in the first post of this thread width is 148mm. Ghost width is 140mm and Ncase 160mm
I am considering building this syntem https://au.pcpartpicker.com/list/gDLbyk and I am not sure what will be the best option as far as later on moving (if is possible) to a custom loop with a 240 radiator (cpu & gpu). The cases that I have in mind are NCASE M1, T1, and C4. C4 Looks very promising
