DAN A4-SFX v4.1

[dondan]

Still waiting for my 3080FE but here is some thoughts how it could be done:

- air cool your CPU for example BlackRidge, AXP90 or L9a + Fan Duct. If you have a high power CPU like 3900X limit it to 65W in UEFI. The 92mm AIO will add to much heat between PSU and GPU
- add a bottom 92 fan as intake to get fresh air between GPU and PSU
- remove the plastic sheet between GPU and PSU
- use a SFX-L like the "Fractal Design 650W" (ratet for ambient temp of 50°C) and flip it so the intake hole will face the back side of the psu.

 

[mangusid]

@mangusid
I can send you a new front panel if you are not ok with the scratches. https://dan-cases.com/rma.html

Thank you Dan. I think I can deal with it by using some polisher. It is not so noticeable now

 

[NewTokio]

* deleted *

 

[dondan]

I am speaking for the founders edition that pushed a lot of heat to the psu. If you now also add the heat of the AIO to this zone it will be very hot.

 

[NewTokio]

* deleted *

 

[supremeMilo]

I scored 15 288 in Time Spy

AMD Ryzen 7 3700X, NVIDIA GeForce RTX 3080 x 1, 32768 MB, 64-bit Windows 10}

www.3dmark.com

Here is my Timespy result with - Corsair SFX 600 Gold , 3700X, 645LT, Losercard PSU bracket, psu normal orientation shortened cables, intake fan under mobo, and plastic removed and undervolted 3080FE. Sound wasn't terrible. Note this was done on a bloated Windows install.

 

[NewTokio]

* deleted *

 

[rfarmer]

I was a bit surprised he could even get it in the case.

 

[Nichronos]

I was a bit surprised he could even get it in the case.

Because it cant, the GPU brackets are outside the case on the back and he cut the entire front of the case so... you can't count that as a fit tho.

 

[dondan]

I was a bit surprised he could even get it in the case.

This is soo crazy cool

 

[Admiral Vint]

I also switched from 645LT to Noctua L9a air cooling about 9 months ago. Using R5 3600, got the temps to be a bit better then with the Asetek. Definitely can recommend, also makes the whole cable management a bit less painful.

 

[kvn1351]

 

[dondan]

 

[XeaLouS]

@dondan found a typo on your website:
Using a PCIe® extender allowes for the

(https://www.dan-cases.com/dana4.php)

 

[Rainge40]

So as far as we know for the 3080's its just the 3 EVGA cards and the FE that fit into the dan A4? @dondan

 

[mkdirs]

There is hope for a 3090 that fit pretty much anywhere... Gigabyte RTX3090 TURBO 24G

 

[Bonusround]

There is hope for a 3090 that fit pretty much anywhere... Gigabyte RTX3090 TURBO 24G

Nice. Now please do a 3080 in the same form factor.

 

[Nichronos]

There is hope for a 3090 that fit pretty much anywhere... Gigabyte RTX3090 TURBO 24G

Yes, for the very modest price of 2k euro

Nice. Now please do a 3080 in the same form factor.

There is, its called "Founders Edition"

 

[eddy178]

So i was thinking how come no one has tried a custom CPU/GPU water cool loop?
I'm thinking of using the LT cpu plate/pump combo with the EKWP block for the 3080 FE which should measure around 200mm giving me clearance to put a 92mm rad on the bottom + a 92mm on the GPU side with a slightly modified 120mm bracket. The rad on the asetec is 97 or so wide so it would fit snug with the 3080 FE water-cooled at around 200mm.
So there would be a Full loop CPU/Rad/Rad/GPU.
I was thinking about a reservoir and i saw a custom one on this same thread but also saw that if you bleed it right it doesn't need it.
I think its possible and could be epic, i wish i had @dondan CADs to try to fit everything and consider which fitting would work for the GPU side, probably the low profile ones will do fine. Also with that custom PSU bracket for more flow and custom cabling.

 

[nightshift]

Yes, for the very modest price of 2k euro



There is, its called "Founders Edition"

We have 2 slot 3090's now, while the 3070 FE is still yet to be released - and I'm still patiently waiting for the 3070 mini... *sigh*