That seems pretty nice. One thing I can mention perhaps is to turn the cooler heatsink orientation upside down so that the heatpipes are facing up. Still, there might be no difference, but who knows. Also, these AsRock boards are great with the L9a since the VRM heatsink is so low-profile, the horizontal fins of the cpu cooler will provide good airflow. This can be further enhanced by removing the I/O shield for ventilation.Well, here are the most terrible photos ever, but eh it works!
I have returned my 3060 and grab a 3060Ti for the same price,
now setting the processor to eco mode, and I am undervolting step by step
the gpu. Things are barely reaching the 70s °C with pushing games,
and the fans are so silent I hear the coils whine...
The gpu is really good, most of the time in the high 50s ; and ambient is pretty high right now in South of France with no AC!
I might make a power plan without boost, cause 3.5Ghz is plenty and it would be even cooler.
Are you in a dorm or something?Upon snagging a perfectly preserved 2060 Super Windfocre rev.2 from the used market while searching for parts for a build for a relative, I am now having second thoughts about letting it go and just keeping it instead while enjoy using the marvelous Dan A4 again. Here it is next to my beloved Velka 3.
While all is well with the great cooling potential of the AXP-90 Full Copper, the mounting screws are way too short to have a backplate. And that I do not like.
Does anyone knows if the Alpenfoln Black Ridge can be mounted with the Noctua L9i/L9a kit, so that I can use that backplate with it?
Nope. It's my own place. We are in the living room and the background is an L-shaped sofa.
Please keep us updated if you actually tried that.Has anyone thought of reducing the enclosure size of SATA SSD hard drive, in order to install two of them to the front of the chassis? I found this pic below from the internet and I believe we can totally cut the enclosure size in half; also it's light enough to be fastened by just two screws.
Any thoughts?
I heard it does. My Black Ridge comes in this week so I'll let you know for sure.Upon snagging a perfectly preserved 2060 Super Windfocre rev.2 from the used market while searching for parts for a build for a relative, I am now having second thoughts about letting it go and just keeping it instead while enjoy using the marvelous Dan A4 again. Here it is next to my beloved Velka 3.
While all is well with the great cooling potential of the AXP-90 Full Copper, the mounting screws are way too short to have a backplate. And that I do not like.
Does anyone knows if the Alpenfoln Black Ridge can be mounted with the Noctua L9i/L9a kit, so that I can use that backplate with it?
It does. Helps with stability but the Black Ridge screws are still very tricky. They really never tighten very snug so you have to kind of feel out the resistance per screw and hope they are all the same.
videocardz.com
So this may seem a bit weird but I flipped my case over and have the 92 mm fans for exhaust I’m currently running a 3060ti overclocked and my temps stay in the 60s my 3080 FE will be here on the 7th so more info to come
