DAN A4-SFX v4.1
- Thread starter dondan
- Start date
Thanks, I saw that previously.
The website states the listed improvements for the v4.1 includes a front USB Type-c port. However the v4 also has this as an improvement. Therefore the blurb does not differentiate between v4.0 and v4.1?
Sort of answering my own question here. Had to dig in archive.org to see full history of release notes.
Here is the v4.0. So clearly is a difference between 4.0 and 4.1.
What's new in v4?
Here is the v4.0. So clearly is a difference between 4.0 and 4.1.
What's new in v4?
Reason I ask is a few v4.0's floating around and wanted to know if it's worth waiting for the 4.1 batch to ship. Anyway, prob dont' need PCIE4.0 for gaming. Not sure what a "internal Key-A" means or if it's worth holding out for ?
4.1 front USB port supports speeds of USB 3.2 gen2, old 4.0 front USB port supports speeds of I think USB 3.0. So basically, with 4.1 you are getting different front USB cable. I think I read that currently there are no ITX motherboards that have USB 3.2 gen2 header.
Just check on Dan cases.com, said available on Nov/Dec… i really hope have the case on b4 OCT for my new build
![:\](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7 "Unsure :\")
?Hoping to get one before Oct as well. Need to travel after that so would like to build the PC for the trip as soon as possible
Available to pre order on sfflab, check it outHoping to get one before Oct as well. Need to travel after that so would like to build the PC for the trip as soon as possible
Custom BIOS P4.20A for Z390 Phantom Gaming-ITX/ac requested from ASRock TSD with IA AC DC Loadline exposed.
Use at your own risk
Use at your own risk
Hi there,
I purchased a v2 from the 2nd kickstarter. I remember reading, and just confirmed, that using an AIO watercooler required removal of the front usb connector.
Would replacing the v2 usb connector with the v3 usb connector (https://www.sfflab.com/products/dan_a4_cable_usb?_pos=1&_sid=12b4825fa&_ss=r) allow me to install the Asetek 656LT 92MM SFF AIO without issue? Much appreciate the help!
I purchased a v2 from the 2nd kickstarter. I remember reading, and just confirmed, that using an AIO watercooler required removal of the front usb connector.
Would replacing the v2 usb connector with the v3 usb connector (https://www.sfflab.com/products/dan_a4_cable_usb?_pos=1&_sid=12b4825fa&_ss=r) allow me to install the Asetek 656LT 92MM SFF AIO without issue? Much appreciate the help!
I emailed Dan this question a while ago he said yes, the v3 connector will work on the v2 case.
Last edited:
Thanks!, it fit without any issues
but not sure if the other 3 fan aftermarket card will fit.I see that Caseking.de has already the v4.1 listed on their site but remains "unknow" but in the Dan-Case website says avaiable in November, so hipoteticaly if I buy it right know I should be receiving it around November. Did someone bought one from them? I'm asking because I'm living in Germany now and it would be awesome to buy it directly from them.
You can look at the Website of SFFLAB.com they're open for preoders of the A4 with shipping at around 18th October.
I do also live in Germany and ordered the Case myself yesterday.
Yeah I just read that, unfortunally after odering the new Version of the Case. I currently have no Idea how to get the Front IO working without any support for this header.
Yeah but I was asking to avoid the more expensive shipping costs, I think I don't have an option at the moment, thanks for the answer!
I have a V2. I saw the 120mm AIO bracket is available separately. I know the V2 doesn’t have the connection points for it, but has anyone tried to retrofit it? Is it a matter of tapping some holes or is it more significant than that?
I’m thinking about stepping up to the 3900x and need a major cooling improvement to get there.
I’m thinking about stepping up to the 3900x and need a major cooling improvement to get there.
The threads are in the bracket so drilling holes should be sufficient. Bare in mind that the holes are concaved for the screws to fit flush otherwise the case won't close properly.
