Okay, thank you! Thats what I gathered from the drawing but I haven't seen any clear pictures of them to be sure.
Pretty sure that if you have a full sized card installed it is going to incredibly difficult to do so. The space below the psu where ssd's go has a small caddy. According to sergiiua it could only hold 15mm in total. You might be able to squeeze the 15mm on top of a 7mm ssd, however you need quite a bit of space for the psu cables as well. The modular cables with most psu stick out quite a bit (especially for the Silverstone sx600-g, less so for the corsair sf 450).
Really no sure way to know if it will fit, since that space is not meant for more than 15mm.
Now with the case you can order a convenient and reliable Sata cable. Also you can order it yourself in the modDIY store.
SSD High-Speed 6Gbps SATA III Cable (20cm)
SSD High-Speed 6Gbps SATA III Cable (30cm)
[Straight - Right-Angle] [Straight - Straight]
SSD High-Speed 6Gbps SATA III Cable (20cm)
SSD High-Speed 6Gbps SATA III Cable (30cm)
[Straight - Right-Angle] [Straight - Straight]
Why would you need a 20cm & a 30cm...?
The SATA ports on your motherboard are not 10cm apart, nor are the SSDs on the other end of the SATA cables...
Couldn't see the imgur comments under pics on my phone for some reason. At desktop i can see where he explained which places are for 20 and 30.
When ordering, please note. To the motherboard you can connect only one 20 pin connector. Therefore, choose between USB 3.0 (two ports) or one USB 3.1.
Has the quality of the cases improved? I just got my batch 2 case and the quality is really bad 
PSU bracket bends really easily. Even my standard dual slot GTX 1060 won't fit so my sidepanel won't close. One of the motherboard screw holes won't line up. Lots of gaps and spaces between the panels. I really want this case to succeed because of its size.
PSU bracket bends really easily. Even my standard dual slot GTX 1060 won't fit so my sidepanel won't close. One of the motherboard screw holes won't line up. Lots of gaps and spaces between the panels. I really want this case to succeed because of its size.
yes with each batch we improve the quality as possible.Has the quality of the cases improved? I just got my batch 2 case and the quality is really bad
Friends, now with a crane to install the drives will be supplied with SATA power cable for 5 connectors. Also included are all the screws necessary for installing the drives.
Another party is ready. Thanks to everyone who is waiting for your patience!
They look better by the batch! Looking forward to batch 6! Been using my new computer without a case for a week now :/
These case designs are superb. What size PSU does this thing support? I'm looking to put a pretty beefy build in here so I need a decent amount of power. I'm thinking i7 8700 and a 1080ti. Its looking like I'll need a 650w psu in here. Does anyone know if there is enough space? Does anyone have pictures of a build using this case?
https://www.newegg.com/Product/Product.aspx?Item=9SIA3915526266
Build with an older version:
https://www.reddit.com/r/sffpc/comments/6t02br/smaller_than_a_dan_case_custom_mod_sfx_mini_592l/
EDIT:
Not sure if sfx-L power supplies will fit in the case but the following will for sure:
https://www.newegg.com/Product/Product.aspx?Item=N82E16817273013
actually maybe it wont, its sfx l as well
http://www.silverstonetek.com/product.php?pid=762&area=en
Last edited:
