Production case SX1 6.8L / SX2 7.5L by Custom_MOD

[Flexon]

Images working now!

"- Storage: 2 x SSD 2.5"..."

Does it have to be SSDs or can I use a 2.5" mechanical HDD?

 

[sergiiua]

Images working now!

"- Storage: 2 x SSD 2.5"..."

Does it have to be SSDs or can I use a 2.5" mechanical HDD?

15mm in total

 

[hardcore_gamer]

Is there a way to use a slim AIO for CPU cooling ? If no SSDs are used, can a slim 120mm radiator fit in that space ?

 

[Boil]

Is there a way to use a slim AIO for CPU cooling ? If no SSDs are used, can a slim 120mm radiator fit in that space ?

Considering that the chassis width is listed at 108mm, I doubt a 120mm radiator would fit there…

 

[sergiiua]

Is there a way to use a slim AIO for CPU cooling ? If no SSDs are used, can a slim 120mm radiator fit in that space ?

@Boil is right. The chassis width is 108mm, 120mm radiator can't fit.

 

[cd109876]

Hi,
Would the normal Intel stock/boxed cooler fit in this case, or would there be problems?

I'm fine with it touching the side panel as there's a peice of plastic that would prevent the fan from hitting the side panel, but I don't want it to bulge the panel (much).

Thanks!

 

[sergiiua]

Hi,
Would the normal Intel stock/boxed cooler fit in this case, or would there be problems?

I'm fine with it touching the side panel as there's a peice of plastic that would prevent the fan from hitting the side panel, but I don't want it to bulge the panel (much).

Thanks!

Max height of CPU Cooler is 45mm.
Just search the height of your boxed cooler in the web. Because there are many different cooles for different cpu.

 

[cadiguno]

Hi,
Would the normal Intel stock/boxed cooler fit in this case, or would there be problems?

I'm fine with it touching the side panel as there's a peice of plastic that would prevent the fan from hitting the side panel, but I don't want it to bulge the panel (much).

Thanks!

Intel stock cooler is 42mm IIRC. Check this out for more info: http://www.silentpcreview.com/article1503-page3.html

 

[cd109876]

Intel stock cooler is 42mm IIRC. Check this out for more info: http://www.silentpcreview.com/article1503-page3.html

Thanks! That article says 45mm, so it would either barely fit or touch the side panel, which I'm fine with. I'll probably buy an l9i anyways.

 

[multi]

Need connectors for headphones and a microphone. With my power supply SX700-LPT on the left side of the body will fit 3.5 * hdd, you need a fastener for it. Can I make it all an option? And very cool if there were regular places on the side panels for dust filters.

 

[stevey500]

And very cool if there were regular places on the side panels for dust filters.

I agree with this too, but on the inside of the case rather than the outside. While external (especially magnetic) filters are convenient, they don't look great, they just cover up the beauty of the case. On top of that, they're just restrictive which is the opposite of what we want in a small form factor build; the smaller the case, the quicker it is to just take a can-air to the whole build and be clean within seconds.

 

[higuy808]

Prototype - April, 10
Batch #1 - April, 30
Batch #2 - May, 30

Any chance we will get some prototype pictures today?

 

[stevey500]

Any chance we will get some prototype pictures today?

I second that!

 

[cadiguno]

I hope it's just Easter holding up the prototype and not some serious problem...

 

[higuy808]

Sergiiua sent me this...
https://vk.com/wall-110200787_10572

 

[popo2076]

I want to buy it. I wrote the order form already...How can I buy it?

 

[higuy808]

Sergiiua sent me a paypal address and some instructions.

 

[sergiiua]

I want to buy it. I wrote the order form already...How can I buy it?

I sent you PM

 

[stevey500]

Looking awesome! I really like that all of the panels are removable separately. This makes for far quicker system hardware changes and potential DIY user color modifications.

 

[higuy808]

This is the smaller case, but still gives an idea of size.