stx

  1. REVOCCASES

    Asrock Deskmini X300

    https://www.asrock.com/nettop/AMD/DeskMini%20X300%20Series/index.asp#Specification Shame that they probably again don't offer the boards without a case...
  2. Curiosity

    .SKP ADTLink R43UR M.2 to PCIEx16 riser (150mm) 1.0

    Modeled this for planning for my A300-M(AX) build, so I'm uploading it in case it's useful for someone else. It's as accurate as I can manage with mechanical calipers and jeweler ruler, simple model for ease of use and also because I saw no reason to model in screws holding things together that...
  3. K

    Accessory Selecting a new NAS system from options

    Hello! I've been lurking for a while, and created an account to join the fun. Long post ahead in the interest of sharing information. I had an Asustor 3204T which just died. Sending it off to them for RMA, they might get unhappy with all the 'warranty void' stickers removed but I'm done with...
  4. W

    S4 Mini with Asrock A300M-STX mainboard

    Hi there, I am currently planning to build an HTPC with a 5,25 bay (fitting the Burson Playmate) and a HDPlex 200W AC-DC + HDPlex 200W DC-ATX inside. So I measured a bit and a Mini-ITX would be to big to fit all the components inside the S4 Mini. So I am asking for someone who already tried...
  5. B

    SFFLAB to sell ASRock STX MXM board?

    Listing is found here. As much as I applaud the addition, three issues I'd like to know more on: 1) I don't know of any cases that are designed for those board dimensions other than ASRock's own. The MXM board is 5.8'' x 7.4'', not the typical STX 5.8'' x 5.4''. Silverstone's recently...
  6. cirrus7

    Prototype cirrus7 incus - fanless case for ASRock DeskMini A300 and other popular STX sized boards.

    Introduction: We have been working on a passivly cooled STX design lately. This form factor has gained quite some interest since ASRock has launched its DeskMini A300. The DeskMini A300 is a nice SFF Barebone system based on the AMD Ryzen CPUs with a powerful Vega 11 GPU integrated. The idea...
  7. thewizzard1

    Storage Partaker B18 on AliExpress... 5x5 board with flat soDIMMs and 3xM.2!

    Ships with what looks like 2x flat soDIMM slots (DDR4), and can be equipped with a 6-core i7-8750H processor. Wow-wee! Looks like a standard 115x socket, as well? Super weird! Also has 3x M.2 slots, two look full x4 capable. I think I see some unpopulated SATA and *other* ports on the board, as...
  8. _ONE_

    Motherboard Smallest/Thinest motherboard with atx ability?

    Hello! For my future prototype I would like to know what is the smallest and thinest possible motherboard deal. But Including desktop cpu socket and at least a pci-e x4 for connecting a decent gpu (1060 and more) I heard about stx and thin itx Stx are perfect in size but seems limited with...
  9. Ross Siggers

    Concept Help with power delivery [STX+GPU]

    Hi all, first time posting aside from an intro thread :) I'm jumping into the world of SFF and whilst planning my first build, the thing I'm finding that's the most different from normal sized builds is power delivery. I've not really used anything apart form a regular ATX supply, nor have I...
  10. ASRock System

    Rumor Possibility of AMD on STX form factor

    There are so many frieds discussed about AMD solution on STX form factor. I told Crew ASRock had one AMD FM2+ 5x5 board.... Let me show off one board I found on my boss's table. We did a very very quick research during CNY. AMD 2200G box fan is so high that can't be installed into our...
  11. Windfall

    Prototype HTPC Micro- 1.7L STX

    While originally designed for just the Sapphire FS-FP5V, this case now works with and is intended for any STX board, but has been designed with Asrock's A300 STX in mind. And we're calling it......... HTPC Micro. A 1.66L case designed to be used with an HDPlex 80w AC-DC for a brickless...
  12. Windfall

    Concept The Mac Pro Mini

    Looking at this thread, I was inspired for my next project. To preface, there has only been ONE apple product I have liked. The Mac Pro trashcan. And it's obviously not up gradable (or down-gradable in my case (pun fully intended)). I wanted a HDPlex 160, STX Mobo, and half height, single slot...
  13. ejectbutton

    Small USB header on STX board?

    Hey guys, so I just ordered an gigabyte STX board (gigabyte GA-H110STX-HD3) and planned on using its internal USB 9 pin port to make IO a bit more robust. It seems though, that the port is actually much smaller than a standard 9 pin plug. I can post a picture in a little while, but for the...
  14. Z

    Production How to power an STX Motherboard with a HDPlex

    I'm trying to build a PC inside of a Gamecube and I have the following Asrock h110m-STX i5 7400 750 ti 12 GB RAM 840 EVO SSD HD Plex 400watt power brick HD Plex 300Watt DC-DC 120 Watt STX Power Brick I can't figure out how to power the mobo off the HD Plex, nor can I find an adapter If anyone...
  15. Therandomness

    Rumor ASRock to enter the GPU market

    Well well well, this could end up being fun. We all know Asrock as the one to do the insane or amazing, so this shouldn't come as a surprise to many. According to the source, they'd be focusing on the MXM sector (which makes sense due to those micro STX motherboards) and AMD GPUs. Hopefully they...
  16. D

    GameCube stx build?

    Alright, so a while back, I wanted to use a GameCube case for my build, and I know it's been done, but I really wanted to do a high performance gaming build. I'm fairly new to this, and really unsure if any of this will work, but here goes. I saw the new stx mobos, Figure this puppy should...
  17. Reldey

    DIY Laptop Idea?

    Hey so I just got an email about the new Pi-top device. It is a laptop-designed case for a raspberry pi. It has a thick, clamshell design that I think could be re-purposed into a DIY laptop, using an STX system with appropriate ventilation and mounting mods. The screen is attached via HDMI...
  18. Colinreay

    Concept Retro STX Cases

    Hey guys, hope you are all enjoying your day! I got a Prusa I3 3d printer about 1.5 months ago and have been loving it so far! Naturally, 3d printing opens a TON of doors in terms of what's possible. Since my usable printing area is about 200x200x200mm, I can print STX cases and small ITX cases...
  19. jtd871

    [AT] Digital Storm announces Project Spark WC STX prebuilt w/MXM

    https://www.anandtech.com/show/12232/digital-storm-announces-project-spark-micro-stx-platform-up-to-gtx-1080-and-i78700k-hardline-cooling
  20. no_one

    Enclosure 2.7L Fanless STX case from Akasa (Galileo ST)

    Product Page Fanless + STX. Now that's what I call niche! Anyways, I've been waiting a while for this one. Some quick info: Comes in two flavors. A-STX05-A1B and A-STX05-M1B. No idea what the difference is ¯\_(ツ)_/¯ Akasa only lists Intel's "T" SKUs in the CPU compatibility table. From this...