noctua

I am seeking the original, non-s, variant of the NH-C14. Currently my Ncase M1 build has the S version, and the slight difference in height is limiting my fan options. I've considered other similar options, but in the end I would like to track down an original NH-C14. Please include pictures of...

Looking for $128 + shipping (16" 12.25" 12.25" box, 12.6 lbs, from 95010) reasonable offers entertained Silverstone SG05BB-Lite Silverstone ST45SF-G with NB-BlackSilentPro PC-P CableMod ATX & EPS Noctua NF-S12A more photos on imgur Like the title says, I've got a SG-05 case and a...

Recently, I had a fan go bad in my GTX 970 mini. I pulled the shroud off, cut out the fan and enclosure, cleaned up the cuts (on the shroud), and mounted a 92mm (14mm) Noctua fan. It fit perfectly into the space where the previous fan sat, however, there really wasn't much to mount it to. I...

My current build is in the Silverstone Raven RVZ02. I plan on gaming and doing schoolwork and maybe light video editing in my spare time. I'm just worried that the Ryzen 5 1600x might not stay cool with just passive case cooling vents and the Noctua cooling solution, especially if it's boost...

Hi, I decided to go a different route for my SFF PC, so selling some parts that I won't be using. All of these were bought new and only barely used for 6 months. Prices are OBO, and include shipping within the US. Please let me know if you have questions! Geeek A20 m/itx case - $25 In good...

Story: Last year, I modded a Spire Powercube 715 case to fit my Cooler Master N200 build. This is the one that started me off looking for smaller and smaller builds, and since then I've learned a LOT from everyone here and other communities online. Parts List: pcpartpicker Issues: I didn't...

so i pre-ordered a zs-a4 case (similar to dan a4-sfx and sunmilo a4) from taobao 2 weeks ago, and was really concerned about cooling my intel k cpu. after some research, i found cryorig c7 + noctua a9x14 yield the best result for cooling and acoustic. While i was looking for an elegant solution...

I currently use my noctua nh-l9i as cpu fan. And no surprise, it's very silent. I saw that I can get 25mm fans that fits the cooler both in the beige color and in the grey redux one. can actually fit it in my case and still have 10mm before I hit the plate. Will they perform better than the...

Title pretty much says it all - what are you using? I'm think I'm going to go with the Noctua D9L to cool an 8700k, but so far haven't been able to find a case that will fit a heatsink of it's size that doesn't leave space for a GPU - even though its not a 'big' heatsink as such.

Hello forum. Don't know if any of you guys have a sff case with a 8700 non k. I have really been trying to find similar setups. I have the cpu as mentioned Asus STRIX-I z370 gaming Ram at 3200mhz (lpx 16gb) M.2 ssd Nano psu 160w Noctua nh-l9i cooler And it's in a streacom f1c ws Evo case...

So I ordered an older cpu cooler that could fit into smaller cases like the S4 and Sentry with their lower height limit for cpu coolers. Cooler in question is a Titan TTC-NC25/HS and it has many different mounting brackets, am4 is left out for obvious reasons. The kit from noctua is a couple...

Anyone know about the results/performance that this cooler provides? I was planning to do a mAtx backpack computer and this was the chosen one for my weird setup as the case have a width of 100mm. One of the things that most impressed me it´s the 140W Tdp rated for 2066 socket and the current...

found this on the SFFPC reddit! (I hope this is okay to post here since it's kinda big news) C'mon guys! Let's tweet them @Noctua_at and let them know we need a black NF-A9x14 PWM! :D ;) "Hey guys, just got word from Noctua themselves. If we can get enough people via twitter and petition...

Anoucement Page NH_L9a-AM4 Product Page NH-L12S Product Page Both products are hard replacements of the L9a and the L12 respectively Stats: NH-L9aM4 Height, Outline, TDP: virtually identical Out-Of-Box Compatibility: L9a: AM2/+ AM3/+ FM1 FM2/+ L9aM4: AM4 NH-L12S Height: Low Profile...

Hey guys, While I'm finishing up the B35, I wanted to share a concept I came up with a couple weeks ago- the Ocelot C8. This is a case intended for the H110-STX motherboard. I would like to preface this by saying that with the school year starting, I likely won't have time to finish this design...

September 3rd, 2017: Hello there SFF Forum, looking to make a computer case for myself and maybe others if they so desire to have one as well. I currently have a Fractal Design Node 202 and actually, even though it isn't, think its really big for what you can put into it. Not to mention it...

Greetings, I have a huge bundle sale here that I would like to fulfill in one payment of $3000 obo. I'd hate to sell this in parts, as it wouldn't really allow me to use the computer. Currently, I am a college student, and require some funds for an important next step in my life. For that...

Does anyone know if there is one of these? If not how easy would it be to make one? Could I just get some small steel pieces and drill holes in them to move the fan holes over or something? Something like this thing i found on ebay (to give an idea)...

I am new here and this is my first post so apologies if this is in the wrong sub-section of the forum, I have a question and it's a really frustrating one to answer (For me at least), What is the approximate minimum height that an ITX Motherboard (Biostar X370 ITX for example) plus a Noctua L9a...

Detailed STEP model of the Noctua L9i heatsink. Measured with calipers and the model is accurate to within 0.5mm. Also included are STEP and SketchUp files of a simplified version for part fitment checking: This model does not include the fan, so be sure to check out @QinX's...