ncase

  1. F

    Front mount for 3.5 HDD + PSU with NOCTUA C14s

    This is the development log of my mount bracket. scoll down for updates! will share when finished. hi all, this is a front mount suggestion for a sfx psu + 3.5hdd to fit a noctua c14s. hdd mount with rubber pads, connectors on top. psu mounts via the standard sfx bracket like on top of the...
  2. propernorf

    Log Ncase M1 5900X + 3090 FE Build Log

    Hello everyone, Posting my first post/build here that I’ve finished around March last year, been using it daily for gaming and WFH. The 3090FE fits perfectly after doing a small cut at front of the case. a snug fit for sure but silent a cool for the size. I've done some upgrades down the line...
  3. alitech

    Log Repeat thread, needs to be deleted

    Planning my all-out build finally. The last piece, the ncase m1 is on the way and will be here in 2 days. I was hoping I could get some tips and tricks for the build? I plan to build a custom Water loop in the case after watching optimum tech videos. I have purchased all the parts. I'll try to...
  4. ghop

    Log 10900k + 2080 Super / Ncase M1 / Air Cooled / Build Complete Log

    Welcome to my build log. I will add updates below as Spoilers with date of update. Photos included. CPU: Intel Core i9-10900K 3.7 GHz 10-Core Processor CPU Cooler: Noctua NH-C14S 82.52 CFM CPU Cooler Thermal Compound: Thermal Grizzly Conductonaut 1 g Thermal Paste Motherboard: MSI MEG Z490I...
  5. P

    Looking for a 4k blu-ray slot load slim drive for the ncase

    Hi all, i've been searching for a 4k blu-ray supporting slot load slim drive for the ncase. Can somebody please provide me with some suggestions? I've not had any luck at all in my searching. Finding a drive that supports 4k discs is a difficult task... Thanks!
  6. L

    Are NCASE M1 still in production?

    Hi there. New to the forum. I would like to know if NCase M1 is still in production?
  7. caboose

    Ncase M1 Custom Looped for Silence

    What's up everyone, I just finished my latest build using the Ncase M1 v6 and some fresh AMD goodness. My previous system was in a Dan A4 and it was great for portability but it was loud as hell under gaming and firing anything up in handbrake immediately pegged the CPU at 95c. Unfortunately...
  8. S

    Strix 1080 and a 240mm rad Ncase m1 v6

    I really want to update my case but I have a ASUS STRIX 1080 and a h110i 240 mil aio will that all fit in the Ncase M1 v6? I have seen people put this card in previous versions of this case but with an air cooler, will the case update or addition of an aio make it incompatible? Card...
  9. YKQian

    Buying NCASE M1 with ODD slot: top panel alone or whole case. V2 or later.

    Proposed payment: Top panel: USD 25 + shipment Whole case: USD 150 + shipment Preferred payment method is PayPal.
  10. Z

    Help: NCase Cooling Issue!

    Good day all, Thought I'd ask for help here as I found this forum with my cooling issue. My specs are in this PC Partpicker list; https://pcpartpicker.com/list/MvPGsZ For some reason my CPU keeps hanging around 50 - 60 degrees C idle. I installed the extra fan bracket and put one of the...
  11. S

    Best fan orientation on full loop

    Hello, this is my build Link Could you please figure out what is the best fan placement This is current setup What i want to do: Place side fan inside on the radiator. My questions: Is it better to place bottom fans under the radiator and make them as exhaust As well as revert top fan to...
  12. S

    [Build done] Ncase m1 fully watercooled

    Hello guys it's my first fully water-cooled PC. I've done it as I don't have plenty of space and using it on external events as server. Comments are welcomed Parts list: Motherboard ASUS ROG Strix B450-I CPU Ryzen 2700x GPU Nvidia GTX1070 (no backplate) Memory Corsair Vengeance RGB...
  13. anoldfriend

    Inverted versus Normal Ncase config 2070 super deshrouded + Nhc14s Tests

    Performed some tests with the ncase m1 comparing inverted versus normal case orientation and got some interesting results.
  14. C

    Build-Check (Raijintek Ophion EVO)

    Hi all, can you please check my Shopping-List for my first mini Build. I cant spend too much :) and it should be silent as possible (Livingroom PC) Im not planning to do OC. Dose the setup make sense?What would you change? Will this all fit in the case? Is ist possible to build it cheaper...
  15. S

    Build Advice (NCase M1 v6)

    Hello everybody, this is my first attempt of building a SFF PC having build only towers or mid-towers for almost 20 years ( damn you Optimum Tech xD ) I already have at home a shiny new ncase M1 v6 and i was waiting for black Friday or other discounts to buy all the parts i need. i'm a web...
  16. S

    Review of v6 and a Build with 3700x

    Just finished the built today, Specs: 3700x @4.3 GHz 1.25v Colorful GTX 1070 oc 150 Mhz ASUS Strix B450I Trident Z 16GB*2 @ 3200 Mhz 1TB 970 EVO Plus + 1TB MX500 + 2TB Seagate Firecuda SSHD Alphacool Eisbaer 240 LT with 2*Noctua A12x25 Rear Exhaust Noctua A92x15 Bottom Intake with stock fans...
  17. M

    Buying NCase M1 V5 Front USB

    Looking for a front USB part of a NCase M1 with black USB ports.
  18. D

    OMNI [Ncase M1]

    Fellow SFF enthousiasts, I've currently got a Ncase m1 build up and running but I'm everything but happy with the temps and noise. Think it is helpful to share the current specs of my system: CPU: AMD Ryzen 2700 CPU Cooler: Noctua NH-C12P SE14 CPU Cooler fan: Noctua NF-A15 PWM Chromax GPU...
  19. davbojic

    New data for V6 on your web page? Mini-DTX compatible? New GPU clearance for V6? New SFX position?

    Hello. I made preorder on Ncase M1. That will be my first PC build from start. When you will change new dimensions and description for new version v6 on your web page (because now is data for v5)? Can you confirm compatibility Ncase M1 with asus AMD AM4 X570 Mini-DTX motherboard (can you put...
  20. K

    Closed Ncase M1 V5

    I have been waiting for a V6 for some time now, and it seems like it isn't going to be ready till September, (Necere said late July early August at best) I want to build my PC 7/7 with a new 3900x, and am not looking to have my pc parts sitting on the table for another 2 months.. I would like...