gaming

https://www.youtube.com/live/OsuLAy2lgIk?si=K8FL1Z9lTrv-z195 While this is aimed at aftermarket units in retro gaming consoles, there is an overlap here when it comes to pico power supplies being used so this might be of interest around here. Also goes into power supply safety.

Hey Guys, thought I'd jump on here to show a preview of my latest SFF creation. This is my first project under 10L, so any thoughts and/or comments will be welcome and appreciated! Specs: GEEEK A50 9.7L SFF ITX case ASRock Fatal1ty X370 Gaming-ITX/ac AMD Ryzen 7 2700 (8C/16T) Noctua l9a...

Hi SFF Folks, New here, because I spoiled myself with a 65" LG C9 OLED, for my 50th Birthday, which recently achieved G-Sync Compatible status. The TV is wall mounted with power and Ethernet all neatly behind and out of sight. I'd like to build a Ryzen 5 3600 Nvidia 2080 super, SFF build I...

Hey SFF, Just recently got into ITX builds. Just bought the geeek a50x case so I'm pretty hyped to get this build started. I was wondering what a more cost effective path would be for gaming (primarily). I see ITX intel boards for pretty cheap but obvi their CPUs are a little more expensive (am...

Hello everyone ! Presentation : I am Aymeric and the founder of AUXOS, after 2 years of development I am delighted to present to you my project AUXOS INVEKTOR-ONE. The result is not finalise yet and that is why I’m looking forward to hear your thoughts on this, opinions, recommendations and...

I love the SFF world, I already have one, and I would like to have another more porwerfull. I am not an expert, but I observe that one of the problems for a correct air flow lies in the bulky PSU. Even SFX take up a lot of space. I have seen that there is a smaller type of PSU, Flex ATX, that...

Hi Everyone!!!!! I wanted to share my mini itx case build that I had been working on for some time with this group. I have pretty much completed these case but with some small tweaks here and there but in all it is almost perfect. The case one one single fan mounted on top and it is a...

Workstation build for CAD and 3D rendering. Dancase A4 v2 Black i7 8700K CPU Z370i Strix motherboard 32gb 2133mhz ram 1tb M.2 SATA drive Nvidia Quadro P4000 Silverstone SX-650 PSU Asetek 545-LC 92mm AIO Noctua NF-A12x15 fan Portable workstation for work days when I need to do lots of Solidworks...

Specs: Intel Pentium G4560T processor (delidded and lapped) Gigabyte GA-H110TN motherboard 8 GB DDR4 2133 MHz ram Inno3D GT1030 passive Western Digital 1 TB hard drive LG Blu-Ray drive 2x Silenx 60mm fans 300 W external PSU I aimed for this build to be as quiet as I can reasonably get...

Hi Everyone, This is my first time posting here, as i've just joined the SFF family (currently in the market for building a SFF PC). I've had some experience building PC's in the past, but i've never attempted a SFF PC before and would like people's opinions on the parts i'm using and whether...

Hey guys. I found the a12 9800 available on taobao, and now that amd updated their bios to allow ram timing info, the apu has amazing performance in gaming. (for what it is) Im considering doing a fully passive, extremely tiny build with this cpu. Any of you interested? ( this was just a...

Project BTN (Beat the NUC) By now everyone is aware of Intel's NUC Skull Canyon gaming PC and its ultra slim package of goodness. However, there is one big issue with this very cool piece of tech and that's the price. You see the little Skully box claims to be a gaming PC and while you...

Hey folks, Im doing some prelim research before buying parts for a custom VR backpack rig. DC-DC is how Im hoping to power the rig. Id like the option to run either off battery, or DC in wired mode if needed. Hoping to run 1070 ITX and an I5 6600T in a Mini-ITX case. Any ideas on what the...

Hey everyone, I'm new here but have been following your forums for a while checking out builds and getting inspiration. I'm looking to build a gaming rig with performance and noise as the two main factors with budget coming in third. I've put together a build on PCPP and would love to get some...

I'm looking for a monitor with a total thickness of 1&1/2 inches or less. I'm flexable as far as the total screen size (optimally 27 inches but anything between 32 and 21.5 is fine). 'Gamer' centric features would be awesome to have (since I will be exclusively gaming on this), but not an...

Hello, I've kinda new here and to making logs but we all should start somewhere someday, right? So I started with idea of making gaming tablet based on desktop parts but turned out that nano-itx with PCI-e and reasonable CPU costs over 1000$ witch made me drop this idea. However, on the way...

Hello guys, girls, ladies and gentlemen, This is my first post in this forum. I had an idea about a small system, which could be attached behind a screen or perhaps ( maybe its possible) to attach a display to this build. I´m planning to build a Pc with a Thin-ITX-motherboard, an intel 45w or...