What's on Taobao

sv3

What's an ITX?
New User
Feb 19, 2020
1
0
Man the 2s looks so good. I have been wanting to move down to this size for a while.

However, having a 3700x and seeing the temps in the thread here: chiphell is a bit scary. Do you think there might be better luck with a loli1 instead? Maybe having the top fans could help out a bit. But if it wasnt for those temps, I would definitely go in on the 2s
 

ChrisMCP

Trash Compacter
Jun 16, 2018
34
13
The X1 is not strictly a clone, it has some alterations over the original Ghost. Here are some comparison images from the QQ group, red is the X1, right is an original Ghost S1.




Secondly you can see that the top hat is secured by larger (probably stronger?) magnets
Does that mean the tophat is attached by magnets to the main case, not screws?? How is it even possible?
Also, with Ghost there is a problem that you can't secure the top grill to a tophat, because there are no screw holes, like on the main body of the case (not sure why they did it this way but sucks because magnets are not good enough for security reasons for instance. Does X1 have the same issue?
 

dannycpham

Chassis Packer
Mar 25, 2019
17
7
Man the 2s looks so good. I have been wanting to move down to this size for a while.

However, having a 3700x and seeing the temps in the thread here: chiphell is a bit scary. Do you think there might be better luck with a loli1 instead? Maybe having the top fans could help out a bit. But if it wasnt for those temps, I would definitely go in on the 2s
Ryzen 3xxx loves to spike in temps, but Ryzen 3700x with a Thermalright AXP-90 would be fine in keeping it in check, especially with long term tasks. If my Noctua L9A can keep a 3950X in eco mode at a constant ~71 or so while gaming for hours, a Thermalright AXP-90 (47mm CPU height) will be fine!
 

smitty2k1

King of Cable Management
Dec 3, 2016
713
361
It looks like the Formula 2s V6.0 is finally available for purchase



Has a removable panel a la Ghost


Overall dimensions: 22x11.4x18.2cm = 4.6L
CPU heatsink height: 48mm
GPU support: 181mm, 42mm wide
2.5 inch drives: 3x or 1x15mm + 1x7mm
That looks really good, better than any of the other mini sandwich cases on the market I think.

I still think most of these cases would benefit from a few extra mm on top or on the front to allow for ventilation fans though.
 

Fueled By Yams

Cable Smoosher
New User
Jan 21, 2020
8
1
Hey, so I've been eyeing these WDEAN DORA cases, like their rip-off of the Ghost or MJOLNIR. Not at all serious about buying one unless someone else has experience with owning one. They look great in the pictures, but taobao cases always look great in pictures. I'm wary of them. Does anyone have one?

Renderings of the "R1S"(Ghost) Actual pics of the "D2S" (MJOLNIR)
(sorry, the forums didn't like the pictures copied address)

Superbuy does give a warning that they don't accept paypal, so they seem sketchy

Basically, I'm trying to find a sandwich-style case that can fit either a hybrid card or a 2.75 slot strix card (which is why I'm looking at the D2S). I'm waiting for the Sidearm T1, but exploring other options as well. If anyone has suggestions, I'd be down to hear them. Thanks!
 
Last edited:

Monfy

Cable Smoosher
Jan 16, 2020
11
3
Hey, so I've been eyeing these WDEAN DORA cases, like their rip-off of the Ghost or MJOLNIR. Not at all serious about buying one unless someone else has experience with owning one. They look great in the pictures, but taobao cases always look great in pictures. I'm wary of them. Does anyone have one?

Renderings of the "R1S"(Ghost) Actual pics of the "D2S" (MJOLNIR)
(sorry, the forums didn't like the pictures copied address)

Superbuy does give a warning that they don't accept paypal, so they seem sketchy

Basically, I'm trying to find a sandwich-style case that can fit either a hybrid card or a 2.75 slot strix card (which is why I'm looking at the D2S). I'm waiting for the Sidearm T1, but exploring other options as well. If anyone has suggestions, I'd be down to hear them. Thanks!
Check out the ZS A4 on taobao. I got it for my 2.75 slot gpu (49 mm rog strix 2070). It also comes with two back plates for different cpu/gpu heights.
 
  • Like
Reactions: Fueled By Yams

Fueled By Yams

Cable Smoosher
New User
Jan 21, 2020
8
1
Check out the ZS A4 on taobao. I got it for my 2.75 slot gpu (49 mm rog strix 2070). It also comes with two back plates for different cpu/gpu heights.
Thanks for the suggestion. I actually was aware of that case, I’m just slow and forgot that the second version supports three slots. Tbh it isn’t my favorite aesthetically, but I’ll keep it in mind 👌
 
  • Like
Reactions: Monfy

ywori

Trash Compacter
Jul 6, 2018
34
24
I have been trying to buy warhead papyrus for the longest time. In the end got a refund. Seller is unresponsive and contact person on taobao is outsourced to some form of customer service. If anyone knows any case which has a small gpu with the same layout :


please let me know!
 

prayogahs

Average Stuffer
Apr 21, 2019
57
54
I have been trying to buy warhead papyrus for the longest time. In the end got a refund. Seller is unresponsive and contact person on taobao is outsourced to some form of customer service. If anyone knows any case which has a small gpu with the same layout :


please let me know!
Its quite an unusual layout but I found a few cases a bit similar.
L01
L01S Super
Interstellar i2
 

ywori

Trash Compacter
Jul 6, 2018
34
24
Its quite an unusual layout but I found a few cases a bit similar.
L01
L01S Super
Interstellar i2
Thanks for your quick reply @prayogahs
First 2 more of an M1 layout?
Last 1 I am not even sure the pictures represent the product?

I have sent a message on taobao to interstellar for accurate pictures. I will let you know if I get a reply.

BTW really nice case list you did. I do browse through that quite often.
 

prayogahs

Average Stuffer
Apr 21, 2019
57
54
Thanks for your quick reply @prayogahs
First 2 more of an M1 layout?
Last 1 I am not even sure the pictures represent the product?

I have sent a message on taobao to interstellar for accurate pictures. I will let you know if I get a reply.

BTW really nice case list you did. I do browse through that quite often.
Thanks, and yeah the first two is more of a M1 layout, theres not much like the Papyrus as its a unique layout. Sorry that I am unsure of the interstellar as its quite new. Hopefully the seller can reply you.
 

OnionFromOrion

Cable Smoosher
Nov 23, 2019
12
11
I have been trying to buy warhead papyrus for the longest time. In the end got a refund. Seller is unresponsive and contact person on taobao is outsourced to some form of customer service. If anyone knows any case which has a small gpu with the same layout :


please let me know!
The Papyrus is pretty unique. Closest I can think of are the Captain S.V6 and Sunmilo S01
 

ChrisMCP

Trash Compacter
Jun 16, 2018
34
13
hope i am not late with this, found a new project on taobao which looks pretty good,


If he add some vent of course
Hm, is it 240 compatible? It's 3 slot but looks like no AIO support.

Also another Ghost clone by the same company. Which makes it the 7th Ghost clone I've seen.

Also I've just discovered Captain S.V2. Seem like a great case in Sidearm style but with 240 support and drilled alu panels option. https://www.chiphell.com/thread-2147655-1-1.html
 
  • Like
Reactions: Nanop

hereforthefeast

Trash Compacter
Oct 25, 2019
45
51
Man the 2s looks so good. I have been wanting to move down to this size for a while.

However, having a 3700x and seeing the temps in the thread here: chiphell is a bit scary. Do you think there might be better luck with a loli1 instead? Maybe having the top fans could help out a bit. But if it wasnt for those temps, I would definitely go in on the 2s
Holy crap this is a beautiful case - I just wish it had space for 2 slim 80mm fans up top like the LZ-A4 mini https://item.taobao.com/item.htm?id=582590926138
 

prayogahs

Average Stuffer
Apr 21, 2019
57
54
Seems the NZXT H1 is drawing some attention and I just come across a square small tower case in Taobao.
It is slightly larger than the H1 and comes in at 200x200x386.
Unfortunately, it is offered as a fully prebuilt system.


Video link: https://www.bilibili.com/video/av88037712/
It seems to look similar to the Monster-01/M01. Is it the same one?

 

sunrainsky

Trash Compacter
Dec 20, 2019
35
10
Have this been posted?

fu致这行话€JaJY15aFbKx€转移至👉淘宀┡ē👈【matx机箱 艾罗拉M40迷你全铝机箱matx 小机箱侧透电脑 itx机箱】;https://m.tb.cn/h.VdKD3p5?sm=6e756e

It has space for bottom two Fans.

The cooler height is 120 but some say 130. 120 would fit a Noctua C14S.

One buyer even taped a slim fan on the top of the case.

It's similar but not quite ncase M1. But it's much much much cheaper.
 
  • Like
Reactions: prayogahs