Concept RTX A2000-X3 | DIY Tripple Fan Mod & Copper Heat Sink

[REVOCCASES]

as promised in my original thread, here are the files to make your own Tripple Fan Mod & Copper Heat Sink for the A2000...



you will need:

• Silverstone 5010 fans
• Copper Heat Sink
• M2x6 self cutting screws, M2.5x8 screws, 1mm plastic washers
• STEP for the 3D printed shroud and DXF for milling the heat sink
• optional: backplate and memory shim
• solder skills or a DIY fan splitter cable

I have attached the drawings to this post, feel free to use for your own personal mods...

 

[swipee]

Really nice! What are the temps?

 

[hygogg616]

Sorry for the bump but could this possibly be able to mod on to a rtx 4000 sff ada gen

 

[GEMCASES]

Sorry for the bump but could this possibly be able to mod on to a rtx 4000 sff ada gen

Hi. No, u will need to adapt CNC pattern and body, because parts on board placed differently. But overall concept is good start: triple 50mm fans and copper only(not aluminium) heatsink. Also as advice search as big heatsink as u can to fit in 2 slot height and lenght of GPU.

 

[tomasl81]

Hi @REVOCCASES, may I have two question? or three if we count this one.
1) I assume this 3D printed triple fan mod cage for three fans can be mounted on the A2000 with the original heat sink, right? please confirm.
2) how would you rate noise from the fans? significantly decreased or slightly decreased or there was just change in the pitch of the noise?

 

[REVOCCASES]

Hi @REVOCCASES, may I have two question? or three if we count this one.
1) I assume this 3D printed triple fan mod cage for three fans can be mounted on the A2000 with the original heat sink, right? please confirm.
2) how would you rate noise from the fans? significantly decreased or slightly decreased or there was just change in the pitch of the noise?

Sure

1) No, it's designed for the custom copper heatsink I've made

2) it's significantly better in terms of noise and thermals