Concept RCC-BIG1EVO | vertical industrial style 12L case

REVOCCASES

Shrink Ray Wielder
Original poster
REVOCCASES
Silver Supporter
Apr 2, 2020
2,057
3,331
www.revoccases.com
REVOCCASES BIG1EVO






Specs (may change / to be discussed):
  • Size: 374H x 173W x 183D (11.84L)
  • Orientation: vertical
  • Material: space gray metallic powder coated aluminum
  • Motherboard I/O: at the back for easy access
  • GPU I/O: at the bottom (pigtail cables necessary)
  • Dual chamber design
  • tool-less GPU mounting
  • additional USB-C at the back
  • many visible screws
  • Optional: dust filter mesh

Compatibility:
  • CPU cooler: up to 71.5mm (e.g. NOCTUA NH-L12S)
  • Case fan: 1x 140x25mm top exhaust
  • GPU size: 321mm long, 3 slots (65mm) thick, 165mm high (w/o power cables)
  • Storage: M.2 and mounting holes for two 2.5" drives
  • Power Supply: SFX, SFX-L

Looking forward to your feedback... :)
 
Last edited:

robbee

King of Cable Management
n3rdware
Bronze Supporter
Sep 24, 2016
855
1,335
Again a great concept! In theory, this could also support short ATX power supplies if you leave out the drives? Also, if the top fan were to be optional, the longest GPU's could even be supported.

Could we get a render with visible screws? Since it's gonna be the character you're aiming for, it would be nice to have a preview of it :)
 
  • Like
Reactions: REVOCCASES

REVOCCASES

Shrink Ray Wielder
Original poster
REVOCCASES
Silver Supporter
Apr 2, 2020
2,057
3,331
www.revoccases.com
Again a great concept! In theory, this could also support short ATX power supplies if you leave out the drives? Also, if the top fan were to be optional, the longest GPU's could even be supported.

Could we get a render with visible screws? Since it's gonna be the character you're aiming for, it would be nice to have a preview of it :)

Thank you.

I guess it could support short ATX but I have to build a prototype first to check how easy the riser cable routing would be...

Currently the 140mm fan bracket is not removable. It is part of the chassis. When I make the first prototype I will check thermals and see if making the 140mm fan optional makes sense.

Usually I make the screw holes last, so still no render. But it will look similar like the MID2:

 
Last edited:

robojim

Airflow Optimizer
Jun 18, 2020
254
222
Any chance the size could be increased to fit a top 180mm fan? Would create a true Xbox Series X style competitor.
 

REVOCCASES

Shrink Ray Wielder
Original poster
REVOCCASES
Silver Supporter
Apr 2, 2020
2,057
3,331
www.revoccases.com
Any chance the size could be increased to fit a top 180mm fan? Would create a true Xbox Series X style competitor.
You mean something like my MID1 but for full length GPUs?