NCASE M1 V6 info
- Thread starter Necere
- Start date
finished cable management of all the V6 cables and the Impact. The only other cables that this build will see are the two motherboard power cables ( cablemod custom made ), the GFX cable ( also from cablemod ) and the fan and pump cables. I'm wainting for the cablemod cables for now. I settled on 20cm for the PSU cables and 35 for the GFX ( I will have to route it quite a bit )
I asked w360 for clarification regarding shipping M1 parts, this is what he said:
wahaha360 said:
So the problem is with Taiwan Post's quality of service, and until that improves, shipment of parts is on hold.
Can u still install a 120mm fan beneath the motherboard?finished cable management of all the V6 cables and the Impact. The only other cables that this build will see are the two motherboard power cables ( cablemod custom made ), the GFX cable ( also from cablemod ) and the fan and pump cables. I'm wainting for the cablemod cables for now. I settled on 20cm for the PSU cables and 35 for the GFX ( I will have to route it quite a bit )
I‘m planing my first mini-itx build for my homelab server (supermicro mini-itx motherboards with Xeon-d are just amazing), and at first I removed the NCase M1 from my list because the front I/O, but now that is going to optional, and after read all the features it has (one of my favorites is the capacity to use a CPU fan of 120mm like the Noctua NH-U9S) is back to the top of my list.
I just hope this new version can arrive for x-mas
it would be like one the best gifts ever hehe.
Thanks!
I just hope this new version can arrive for x-mas
it would be like one the best gifts ever hehe.Thanks!
Last edited:
I‘m planing my first mini-itx build for my homelab server (supermicro mini-itx motherboards with Xeon-d are just amazing), and at first I removed the NCase N1 from my list because the front I/O, but now that is going to optional, and after read all the features it has (one of my favorites is the capacity to use a CPU fan of 120mm like the Noctua NH-U9S) is back to the top of my list.
I just hope this new version can arrive for x-mas
Thanks!
The Noctua NH-U9S uses 92 mm fans. There are a few short tower coolers that use 120 mm fans and still fit within the Ncase M1, but compatibility depends on the position of the CPU socket on the motherboard, the size of the VRM heatsinks, and the height of the RAM modules. One such model is the Thermalright Silver Arrow 130.
Ok, so it seems that this is going to be my case of choice, based on my research, using the Noctua C14S with the NCase M1, vs for example the Noctua NH-12S which is the one I was planing to use if I choose the Ghost S1, the Ncase combination could beat the ass of the ghost s1 with a difference of 10 C under high load, that is just amazing, if anyone with more experience can comment on this I would really appreciate it. And for now I just need to wait for the availability of the V6 .
Thanks!
.Thanks!
Last edited:
There is room for a 120mm below the motherboard but it's tight, and the cables get in the way. You might be able to squeeze it in though.
yes, there is plenty of space. It will eat into the GXF area tho. You will be restricted to a one or two slot GFX.
and Taiwan Post is the only available option? Why not change the carrier then? Can we assume that this is a temporary problem and you will offer parts again in the future?
I just wondering, I have a pending vacation and Taiwan is on the list of places that I may visit, there is an online Store or physical store where I can get the Ncase and bring it with me?
So just to understand, is there other places where we can get the power cable angled in the other way? I can mount it like this now, it's really bad.
I have a rx 5700 xt in my v6, which has the same dimensions. But what is your question?
yes, there is plenty of space. It will eat into the GXF area tho. You will be restricted to a one or two slot GFX.
It seems that if you wanted to install a radiator in the future, there wouldn't be enough space.
Better to choose an itx board
So, I just found this on TaoBao: https://item.taobao.com/item.htm?sp...5p63A&id=564946757208&ns=1&abbucket=10#detail , I understand that I need to use an agent for get stuff from there, is that safe? Or better wait to the restock?
usually the radiator goes on the side bracket and not on the case floor because then you will have no space for a GFX if you put a radiator plus fans down there.
I asked w360 and apparently both FedEx and UPS require a business account to get decent rates, but only Taiwan residents or companies are eligible (neither of apply to him or NCASE/SFFlab). Without an account the only option is to ship retail, which for the M1 is $250 (!).
No, there's no store.I just wondering, I have a pending vacation and Taiwan is on the list of places that I may visit, there is an online Store or physical store where I can get the Ncase and bring it with me?
Other cases use similar cables, but I don't know offhand where you could get one.
