GOAT NANOQ build, absolutely insane. It's not only maxed out in terms of rad space, but also so minimalistic (the GPU compartment looks basically empty). I'll try to do a similar look myself once that GPU block becomes available.
GOAT NANOQ build, absolutely insane. It's not only maxed out in terms of rad space, but also so minimalistic (the GPU compartment looks basically empty). I'll try to do a similar look myself once that GPU block becomes available.
@AlexTzone will it be possible to convert a v1 case fully to a v2?
I have my v1 still unopened waiting for hardware and would like to know if I can purchase the parts needed to convert it to a v2.
I think the v2 upgrades are big enough to that I want to do it.
I have my v1 still unopened waiting for hardware and would like to know if I can purchase the parts needed to convert it to a v2.
I think the v2 upgrades are big enough to that I want to do it.
For NANOQ S you get the majority of benefits from V2 by grabbing the Radiator Rails V2 and Power Button V2 from the login site. To fully convert it to V2 would require basically a new case, because a lot of parts are ever so slightly changed.
Is there an available thickness of the Tetra cases (any of them)? I.e. the "height" when it's in its lying down position? Trying to figure out if it will fit in my desk 
Unrelated; Shouldn't this thread be renamed to something like Thorzone or something since it's not only about the Mjolnir anymore but also about NANOQ (and now Tetra)?
Unrelated; Shouldn't this thread be renamed to something like Thorzone or something since it's not only about the Mjolnir anymore but also about NANOQ (and now Tetra)?
@AlexTzone I want to replace the Riser in my Mjolnir with a real PCIe Gen4 cable. What length and type should I order from ADT-link to fit in the Mjolnir?
PCIe x16 Extension Cable
PCIe x16 Extension Cable
@AlexTzone I want to replace the Riser in my Mjolnir with a real PCIe Gen4 cable. What length and type should I order from ADT-link to fit in the Mjolnir?
Something like 19cm double-reversed should be good
We used 18cm in the last MJOLNIR years but it may be tight if it's a new riser model (19cm is on the safer side)
Is there an available thickness of the Tetra cases (any of them)? I.e. the "height" when it's in its lying down position? Trying to figure out if it will fit in my desk
Unrelated; Shouldn't this thread be renamed to something like Thorzone or something since it's not only about the Mjolnir anymore but also about NANOQ (and now Tetra)?
@AlexTzone 2 months later and no reply, any update?
Anyone know what's the most powerful GPU currently (June of 2025) we can fit into the Mjolnir? Im trying to avoid sifting through 275 pages here.
You "can" fit an SFX-L but it gets pretty cramped. Doing so you could get a 1200W Asus Loki for probably max power. On the SFX side you can easily fit either the Corsair 1000W or Coolermaster 1000W. No matter which option you roll with, you'll probably want to opt into custom length sleeveless cables.
I'm half way through my Nanoq R build, awaiting a CPU pump block from Modultra in the states. meanwhile I connected up my old D5.
Mine's a Batch 1 case, but as I didn't buy it from Thor Zone I can't access the upgrade pages. I'm hoping someone will get me a login soon. ( Please !!)
Meanwhile I've encountered some of the issues other reviewers have done. Trouble with the Radiator screws not being long enough, PSU cables being too long. One of the reviewers managed two squeeze in a 280 by 30mm rad, but I can't only fit a 20mm rad, so I think cooling is going to be an issue. Furthermore fitting a top rad, which I'll use as a res is not easy either. Such is life building a SFF I suppose
Mine's a Batch 1 case, but as I didn't buy it from Thor Zone I can't access the upgrade pages. I'm hoping someone will get me a login soon. ( Please !!)
Meanwhile I've encountered some of the issues other reviewers have done. Trouble with the Radiator screws not being long enough, PSU cables being too long. One of the reviewers managed two squeeze in a 280 by 30mm rad, but I can't only fit a 20mm rad, so I think cooling is going to be an issue. Furthermore fitting a top rad, which I'll use as a res is not easy either. Such is life building a SFF I suppose