1. sergiiua

    Concept case SLM 2.5L by Custom_MOD

    Hi all! I have prepared a case model for mini-ITX motherboards without a video card. Power supply via pico PSU and a special internal power supply unit (I will talk about it a little later). Size: 2.5L (195mm x 192mm x 67mm) Material: aluminum (1.5mm) MB: mini-ITX (170 x 170mm) GPU: no. CPU...
  2. _ONE_

    Prototype THE TINY BOY'S ADVENTURE! - Join me through the wonderful story of a tiny case... of 3.68L

    The Tiny Boy’s adventure From drawing to shipping, walk with me through this adventure where I create more than a PC case: A Product! Music suggested for reading my thread (c'mooon...just tryyy! ?) :
  3. O

    New configuration SFF with AMD Ryzen 3900x

    Hello everybody! I'm planing to config my first SFF build. Im looking for ITX case and air cooler for cpu (3900x) anyone configured with FD Node 202 with 3900x? What about temps on burn (no OC, just as is)? What cooler for CPU? Share your experience. Also it will be perfect to set 3.5HDD...
  4. M

    Lian Li PC-Q21 build advice for maximum airflow

    I plan to build this as soon as my case arrives. I can see myself and have been made aware that there will be airflow problems so I plan to mod the case but I'm not sure what fan or how many fans to add or what to do about GPU ventilation. I plan to cut a hole up top with a hole saw for a 120mm...
  5. S

    Problems getting it all to fit! V4 build with 92mm AIO cooler.

    Hi All! Today I received my Dan Case SFX V4 and whilst I think its great, I think it could do with some further refinements for the AIO users like myself. I've effectively transplanted an old LGA115 Mini-ITX system into this, with two adjustments, I bought the Corsair SF-600 Gold SFX PSU and...
  6. Cawa

    Concept Ocelot Boreal V2

    Hello! After taking a bit of a break from building PCs, I am happy to announce this new project- the Boreal V2. The purpose of this project is to take make the Boreal B35 available to anyone who has expressed interest in getting their hands on one as well as to improve some design elements and...
  7. es2305

    Power Supply Help to choose power supply for a very small case

    Hello everyone, I am a tech apassionated person like a lot of you and for a hobbie project I wanted to build a small form factor computer, but I have two issues, 1: I am not sure if everything will fit into the case, and 2: by choosing the Mini Plug Type DC PSU Module and AC/DC power supply...
  8. Aymetal

    Prototype Full compatible GPU in ITX case of 5.1 L -- AUXOS INVEKTOR-ONE --

    Hello everyone ! Presentation : I am Aymeric and the founder of AUXOS, after 2 years of development I am delighted to present to you my project AUXOS INVEKTOR-ONE. The result is not finalise yet and that is why I’m looking forward to hear your thoughts on this, opinions, recommendations and...
  9. S

    Concept SFF Tower case gaming PC

    Hey guys! I want to share with you my idea. Maybe here it will be interesting to someone. A little background. I started to monitor different startups, starting with N-CASE, then DAN CASES a4-sfx, NFC S4 MINI, DR ZABER CENTRY. These are very cool projects and they are unique each in its own...
  10. N

    Stalled UniQ-1 :: 11.2L mini-ITX - Uniquely Air-Cooled - Truely Silent - High Performance Case

    UniQ-1 :: 11.2L mini-ITX - Uniquely Air-Cooled - Truely Silent - High Performance Case Case panels view with PC-stack inside Case Skeleton and Sample Front Plates. ** Green/Red GPU mounting mechanism, ** Blue - SSD mounting brackets V2B-The Dark Tower design A couple of weeks ago I...
  11. D

    Build idea

    Hi all, would love some feedback on a new build idea. Found what i think is a very good, reasonably priced case. PC would be on all day and mostly used for internet, office use, streaming and photoshop. thoughts please. SPEC CPU - Intel - Core i5-8600 3.1GHz 6-Core Processor CPU Cooler -...
  12. J

    Hardware Choices For Mini ITX Build

    Hello! I'm new to this community and would like to ask for some opinions on my next computer build. Background Information: I definitely would like my build to be in the Mini ITX size/FF. However, what I'm trying to decide is what GPU and CPU to put into it. GPU Decisions: The problem is that...
  13. CC Ricers

    Closed ASL single slot low profile GTX 1050

    Update: all parts are now sold.
  14. P

    Need advice to reduce cost for Sentry mini-ITX build

    Hi, I've recently got a hold of one of the Sentry mini-ITX cases, which I think are absolutely gorgeous! With my somewhat limited knowledge of computer parts, I read the requirements for the Sentry along with a few guides and put together a build. I feel however I could reduce the cost, but I...
  15. V

    Node 202 Build w/ R9 Fury

    Short story, my wife did not like my test stand PC setup and made me store it away when I wasn't using it. I stumbled on SFF builds shortly after and have been researching since. I wanted to keep as many of my original components as possible which landed me at the Node 202 for my case of choice...
  16. C

    Concept Is this Pico PSU combination okay? And advice for a custom case?

    Hi people! I am brand new to this forum and this is my first thread so I'm sorry if it's in the wrong category. I am going to make a custom wooden small form factor PC case to suit my needs as I travel a lot. It will be an all in one computer with a 15 inch display converted from a laptop...
  17. Biowarejak

    Concept Project: Radian - 13 Liter Dual 240 Rad ITX Chassis

    Project: Radian EDIT: Latest Update Starting 10/27/2017 I began all the computer aided design work using FreeCad, an amazing if quirky tool that's still essentially in apha - and totally free. About a week before that date, I was doodling in class, running off 5 hours of sleep and a Dr...
  18. AlexTzone

    Completed MJOLNIR: The minimalistic – but not boring – 9.7L Case

    PRE-ORDER Heey guys, happy to present our first SFF project: MJOLNIR: The minimalistic – but not boring – PC Case. I'm Alex (founder), let me know if you have any questions / ideas / feedback and I'm sure we'll come up with something amazing together ? MJOLNIR is milled out of solid...
  19. wesbl

    Ebony Cube

    Hi! I'm waiting for my Lazer3d LZ7 delivery, but some parts of my build just arrived! Motherboard: Asrock AB350 Fatal1ty Itx. CPU: Ryzen 1700. CPU Cooler: Zalman CNPS8900quiet (adapted by me! They sent me wrong conversion kit :(). Ram: 2X16Gb 3200Mhz CL16 Corsair Vengeance. SSD: M.2 NVME 1Tb...
  20. LUNA Design

    Production PRIME. CNC Milling PC case

    October 2020 Update: Now PRIME supports Flex-ATX as well as SFX (SFX-L) PSUs. Added support for GPUs up to 250mm (With Flex-ATX PSU). Added support for additional 2 x 3.5" HDDs instead of GPU (With Flex-ATX PSU). Front USB panel was removed for better appearance and Flex-ATX PSU support. New...