This^
Please keep it on topic guys
Please keep it on topic guys
We know there will be some sort of PCIe riser...
We know the GPU is vertically mounted, and with the "GPU cable exit through the bottom" statement, we might assume the output ports & PCIe bracket is facing downwards...?
We know the chassis will include a PCIe riser, and with where the PCIe slot on the mobo is & the assumed positioning of the PCIe tab on the GPU ("GPU cable exit through the bottom"), we might infer that there will be a 45 degree bend in the PCIe riser...?
Might this put undue stress on the PCIe riser, I dunno...
Just sitting here some, staring at my cardboard mockup, thinking about the layout...!
Current Velkase Velka5 and Velka7 use a similar system albeit with internal display adapters - but it really shouldn't have an impact on the riser, it would just add a little extra width to a standard sandwich layout.
I wonder why the decision for rear MB IO but bottom VA IO? Typically Display cables are bulkier and stiffer so it would usually make sense to redirect the output to the rear - although I guess with a budget focus these cables would add quite a bit to the price.
mirrors an idea i had in the past, my motivation was for ease of cable routing/IO access
I know it puts more cables higher up, but placing the PSU below the mobo drops the center of gravity (important in a vertical chassis) and puts the bulkiest cable down low...
Thinking more about the GPU side of the sandwich...
Listed height is 360mm, unknown if this has changed at all due to the 313mm length of the Nvidia RTX 3090 FE or the (rumored) 317.5mm length of Big Navi...?
Allusions towards possible changes to the dims of the P1, but unsure if those possible changes might have made it to H280 / Mesh-Licious before said chassis was finalized for production...
But assuming the 360mm listed height remains, how much of that is the area under the chassis for the (downward facing?) GPU ports & accompanying cable(s)...?
Might be a tight squeeze, might need to find some of those DisplayPort cables with the angled connectors...!
Listed height is 360mm, unknown if this has changed at all due to the 313mm length of the Nvidia RTX 3090 FE or the (rumored) 317.5mm length of Big Navi...?
Allusions towards possible changes to the dims of the P1, but unsure if those possible changes might have made it to H280 / Mesh-Licious before said chassis was finalized for production...
But assuming the 360mm listed height remains, how much of that is the area under the chassis for the (downward facing?) GPU ports & accompanying cable(s)...?
Might be a tight squeeze, might need to find some of those DisplayPort cables with the angled connectors...!
that's true, i think at the time i was worried about pulled cables knocking the case over, but it doesn't seem to be an issue among velka 7 users.
the nzxt h1 makes do with 3 inches (76 mm) of clearance between IO and desk surface; there are plenty of 90 degree displayport adapters that are 30-40mm in height so it seems feasible to fit 300mm+ cards.
Not if you give the bend enough space, and with 165mm there seems to be enough of it for this bend to be safe IMO but yeah we need to wait and see.
Last night I dreamt Mesh-Liscious was going on sale end of November ?
Considering its made in partnership with Lian-Li, I was kinda sus that it is actually Mesh-Licious itself lol
Mesh-Licious = 165x245x360mm, 14.5L / 3~4 slot VGA, VGA cable through bottom
B-Team BB1 = 170.02x216.01mmx387.04mm, 14.21L / 2~3 slot VGA, VGA cable through top
Mesh-Licious or not, that looks quite nice as well!
No AIO support, no mDTX support; no thanks...!
Maximum 305mm GPU support...? Big Navi three-fan reference is supposed to be 317.5mm in length, Nvidia RTX 3090 FE is 313mm in length...!!
Oh! Mesh-Licious, to be freed from the shackles of your NDA...!!! ;^p
Maximum 305mm GPU support...? Big Navi three-fan reference is supposed to be 317.5mm in length, Nvidia RTX 3090 FE is 313mm in length...!!
Oh! Mesh-Licious, to be freed from the shackles of your NDA...!!! ;^p
Hello there,
We developed our idea "BB1" from 2019 and plan to release 100 pcs for TW local enthusiasts,
and we got the clear time record listed below:
https://www.pttweb.cc/bbs/PC_Shopping/M.1563388655.A.8FA (2019/10/8)
www.pttweb.cc
www.pttweb.cc
We make a very first prototype on 2019/10/8 post:
https://bteamlab.com/img/prototype1.jpg
https://www.pttweb.cc/bbs/PC_Shopping/M.1579713455.A.21D (The MP Sample)
https://www.pttweb.cc/bbs/PC_Shopping/M.1584883693.A.54C (The first black one on 2020/03/22 )
https://www.pttweb.cc/bbs/PC_Shopping/M.1601014672.A.5E5 (Assembly in Lian-Li TW factory on 2020/9/25)
Honestly we don't have plan on marketing, but to say stolen someone's idea, I believe the record won't lie.
Hope everyone got the gears they like
Regards
Ed
B-Team Lab
We developed our idea "BB1" from 2019 and plan to release 100 pcs for TW local enthusiasts,
and we got the clear time record listed below:
https://www.pttweb.cc/bbs/PC_Shopping/M.1563388655.A.8FA (2019/10/8)
Re: [閒聊] ITX機殼自製 - 徵求意見 - 看板PC_Shopping
大家好。. 之前有來板上，問大家對 ITX 機殼有什麼看法，. 收集了大家的意見、跟業內幾位好朋友討論，. 考量原創性、實用性等條件後，做出了我們暱稱「BB1」的 Core Module。. http://******/2Vmy8bx. BB1 的主要設計概念與特色如下：. ˙ 直立式機殼，節省桌面空間. ˙ 模組化結構設計. ˙ 具備「主結構」、「I/O 結構」、「水冷艙結構」三大結構. ˙ 三大結構可任意選擇方向組合，可自由選擇擺放位置，以卡榫扣具結合. ˙ 主結構顯示卡部份採用獨立風道設計. ˙ 主機板/顯示卡採用滑動機構設計，可支援各種高度之散熱器與 3 Slot 顯示卡. ˙ 支援各
Re: [閒聊] ITX機殼自製 - 徵求意見 - 看板PC_Shopping
大家好，. 今天把機器湊起來了，烤成鈦色，. 不過有烤失敗的地方，請大家加減看看。. https://bteamlab.com/img/prototype1.jpg. 然後道歉一下，做到目前，外型部份的確是五十步笑百步，. 只能等下一次打樣惹 QQ。. 協力廠商：聯力工業. 個人不喜歡透測所以沒考慮過。在電源跟顯卡中間有規劃3.5吋/2.5吋位置。現在的確是緊。兩側有風扇支架，上下可出風。我個人有裝，但覺得還好，裡面某些構件安裝手順微妙。可以自由挪動。有風扇支架。I/O艙可掛風扇。認同。同上 XD結果只能塞12的 ww對不起。目前測試溫度還不錯。鈦色請參考看看。DP測試過了，稍微扭一點，個人覺
We make a very first prototype on 2019/10/8 post:
https://bteamlab.com/img/prototype1.jpg
https://www.pttweb.cc/bbs/PC_Shopping/M.1579713455.A.21D (The MP Sample)
https://www.pttweb.cc/bbs/PC_Shopping/M.1584883693.A.54C (The first black one on 2020/03/22 )
https://www.pttweb.cc/bbs/PC_Shopping/M.1601014672.A.5E5 (Assembly in Lian-Li TW factory on 2020/9/25)
Honestly we don't have plan on marketing, but to say stolen someone's idea, I believe the record won't lie.
Hope everyone got the gears they like
Regards
Ed
B-Team Lab
Pretty sure Luke NK was joking about the "stealing" thing...!
Very excited for this Mesh-Licious. I've been wanting the Evolv Shift Air, but after seeing this thread I've been checking daily for updates or renders. After a week of checking this thread I figured, I'd better register here on the SFF forums!
Similar threads
