I think I'll make 10,000 cases, what could go wrong? I can see my bed. Night.Damn numbers, making all the stuff hard
I think I'll make 10,000 cases, what could go wrong? I can see my bed. Night.Damn numbers, making all the stuff hard
Teaser 2 - Azure Blue IO Panel:
And think, just two weeks ago it was only an idea we had! Now it is reality! So happy for you that it worked out so well and it really looks great!The thread starter is asleep, time to post some picture
Yup, it work !
No more Franken-like tubing out of the body anymore
Wait a second! After looking at your pics again It has finally dawned on me that I don't have to stuff a small/inferior 40 mm radiator together with fans into a limited <50 mm space I have either to the left of my sound card (PCIe slot) or above my cpu (m/b) in my Silverstone ML06B-E case! I can simply affix a much larger and more effective dual 80-90 mm radiator on the left side panel (outside of my case) like yours... which would then allow me to use much better/quieter Noctua 80 x 25 mm fans instead of noisier/weaker 80 x 10-15 mm ones!!!
Maybe to reduce your costs, offer an option of allowing people to print their own corners? I have a 3d printer and would def print my own corners in one my many various filament colors.
With the ability to 3D print a prototype it seems a shame there is no way to cheaply utilize that prototype to make a mold.
It's a whole panel of acrylic , lol
After I pop it out of the panel.
Notice the slight colour difference
Yup, it work !
This matte blue panel is perfection. I love the redesign, please keep it! Not a fan of the vent pattern on the orange version.
@tomnyamkun can we get more pictures from the front, where the radiator is mounted?
Wait a second! After looking at your pics again It has finally dawned on me that I don't have to stuff a small/inferior 40 mm radiator together with fans into a limited <50 mm space I have either to the left of my sound card (PCIe slot) or above my cpu (m/b) in my Silverstone ML06B-E case! I can simply affix a much larger and more effective dual 80-90 mm radiator on the left side panel (outside of my case) like yours... which would then allow me to use much better/quieter Noctua 80 x 25 mm fans instead of noisier/weaker 80 x 10-15 mm ones!!!
So the fan is pulling hot air from inside the case and pushing it through the radiator cooling it?
Thanks for the extra pics!Yup!
The front/side/top (depending on your orientation)
Yup the fan is set to exhaust.
In my thought, the air inside the case isn't supposed to be hot because the pump and the radiator move the heat from the hottest component (The CPU) out of the case.
And, because the radiator is put outside and in contact with the ambient air directly, the slim fan should not work that hard to shed all those heat.
(This is only my thought and isn't backed up by any scientific data thou )
The only problem with AIO set up is the M.2 temp, my M.2 sata SSD idling at 50~ C
What I am trying to do is reduce the amount of 3D printing material as this is by far the most expensive part of the case to produce.
You could use multipart silicone moulds to cast resin copies of the 3D printed parts. The moulds only last for a few hundred casts, but they are cheap to make and can reproduce fine detail and minor undercuts (due to the mould flexibility). The downside is the process is manual (both the casting, and the finish of the cast by removing the sprue and vents) and the number you can batch at once is dependant on the number of moulds you make. You'd also ideally need a vacuum chamber to degas the parts to prevent voids.With the ability to 3D print a prototype it seems a shame there is no way to cheaply utilize that prototype to make a mold.
Even though I particularly like the orange panel's vent pattern I definitely would choose performance and silence over aesthetics any day!The vent pattern on the Orange panel is for people who dont want to attach a grill or filter over the fan. The pattern is a theory I wanted to test for maximising airflow and reducing fan vent noise, it exceeded my expectations, I appreciate though that it's not everyone's cup of tea for aesthetics.
There is also a perforated panel with hex shaped holes, this looks amazing by the way, especially when combined with the new minimalistic power panel design. But compared to the other panels designs it performs poorly as an intake vent, especially in the noise department.
I believe this radiator mounting position may have offered more room for the usb ports (see pic here)That radiator looks a bit too close to the USB ports to plug anything in. Or is that just the perspective playing a trick on me?
Yeah, our motherboards' M.2 position underneath is known for these higher temps... but anything under 60 C idling and under 70 C at 100% usage should be fine... what say you?The only problem with AIO set up is the M.2 temp, my M.2 sata SSD idling at 50~ C
Thank you for this explanations; makes perfect sense. More important that the GPU runs cooler than the M.2 which can handle temps well above 70 C for long periods of time.Thanks for the extra pics!
Technically the case should be cooler inside, as you say the hotter air of the CPU is being exhausted directly outside the case so you see zero heat recirculation from the CPU.
However, the downside to setting the side fan as an exhaust is that it pulls some of the warm exhaust air from the GPU into the case and across the motherboard. This is likely why your M.2 Drive is running warmer.
On the upside the negative pressure will be aiding the GPU fan pull air into its heatsink through your GPU dust filter, so you will probably find your GPU is now running a bit cooler during gaming aswell.
Ok I probably need to do a survey or something, or perhaps go back to the drawing board for the power panel design, come up with some alternatives.
What I am trying to do is reduce the amount of 3D printing material as this is by far the most expensive part of the case to produce.
The First Edition were sold at pretty much cost price, so unfortunately the next round of cases will have to be sold at a higher price. Reducing the amount of 3D printed material is a way to try and minimise that cost increase.
But if the general concensus is that it has a negative impact on the overall aesthetic, then I need to re-think things!