Production FormD T1 Classic (READ FIRST POST)

[Wahaha360]

Question for everyone
I bought a v1.1 T1 July 24 batch, when I was installing my (very tall) GPU, I noticed my main strut did not have the recess like some other photos I saw. This causes my pcie plugs to hit the main strut and prevent the GPU from sitting flat against the PSU. I believe this gpu is within spec (136mm tall)

Mine:

PCIE plugged in, causing GPU to lift up:

With recess:

https://i.redd.it/m5oldezxc8a61.jpg

What GPU are you using?

 

[Navic]

What GPU are you using?

Looks like either a 3080 or 3090 FTW3

 

[cennis]

What GPU are you using?

3080 FTW, smallest 3x8pin 3080 available! I already lowered the gpu mount to the lower position but pcie cables still too tall

 

[easkea]

Asking for a friend: Are there any suggested ways to fix/hide a thin scratch on the front plate (black finish)?

 

[Wahaha360]

Isn't this self-made? I don't have it either!

Same here. Only “recess“ is on the mobo side for the riser.

We secretly updated the Mobo Strut for this clearance for T1V1.1 for 2020 late October batch.

 

[Wahaha360]

3080 FTW, smallest 3x8pin 3080 available! I already lowered the gpu mount to the lower position but pcie cables still too tall

Email support, tell them I said you can get a new Mobo Strut with recess cut.

You may have to send your current one to do the swap, or buy the Mobo Strut.

 

[simkev]

Yes, but it will require a new Front T-Frame that's going to release closer to Feb 2021.

Is this still happening?

 

[Wahaha360]

Is this still happening?

Yea it's part of the Classic V1.2 update.

 

[MemoryKD]

can v1.2 support rog strike 30xx

 

[Wahaha360]

can v1.2 support rog strike 30xx

Yes.

 

[Wahaha360]

Nothing is final until it’s final. So here are some updates to give you guys idea what’s on the list for V1.2:

- 1mm depth increase, 133x217x331mm
- one piece Front Frame for better color control and match with Top/Bottom Panels
- recessed Front Frame canvas for two-tone and other creative possibilities
- 1.25, 1.5, 1.75, 2, 2.25, 2.5, 2.75 and 3 GPU Slot space allocation on *single Rear IO Plate for finessed GPU space optimization on less parts
- dual 240 radiator / AIO cooler support on 1.25 GPU Slot with *single slot WC GPU.
- vertical stand upgrade kit for less desktop foot print
- recess cutouts for magnets, for holding Mesh Side Panel or Tempered Glass Side Panel in place during disassembly
- support for 320mm long GPU like ROG Nvidia 30XX and AMD 6XXX (MSI Gaming X Trio and Suprim X not supported, 5mm too long)

 

[thelaughingman]

@Wahaha360 proper dual 240 radiator support is a really great feature! though just a couple of questions with the new layout for the 2nd radiator on the MB side in 1.25 slot mode

• what is the clearance for CPU block + fitting? my napkin math says 50-51mm?
• for the GPU block, terminal rotary fitting is a must now right? with just 25mm in width (1.25x20mm) there's no way to have any fitting coming out of the standard terminal

keep up the great work!

 

[MemoryKD]

Can v1.2 be sold before June?

 

[Wahaha360]

@Wahaha360 proper dual 240 radiator support is a really great feature! though just a couple of questions with the new layout for the 2nd radiator on the MB side in 1.25 slot mode

• what is the clearance for CPU block + fitting? my napkin math says 50-51mm?
• for the GPU block, terminal rotary fitting is a must now right? with just 25mm in width (1.25x20mm) there's no way to have any fitting coming out of the standard terminal

keep up the great work!

The clearance for CPU + Block is almost 49mm. If the Side Rad / AIO Fan Bracket can allow movement towards and away from the Top/Bottom Panel, we can make clearance for taller fittings.

Yes, terminal rotary fitting for the GPU is a must for dual 240 setup.

 

[Wahaha360]

Can v1.2 be sold before June?

Targeting April.

 

[BSartist]

For those of us that cancelled our v1.1 orders for first dibs at v2.0, is that still the EVO or v1.2? I’d probably prefer the EVO, but I’m not sure without seeing more details on it.

 

[biopunk]

The clearance for CPU + Block is almost 49mm.

Just to clarify, does 49mm include CPU+CPU socket or is it just the maximum CPU cooler height?

 

[paulesko]

I love it! It´s exactly what I said it would be great to have if you want to watercool. a 1slot configuration so the lateral raidator has room to breathe. AWESOME!

 

[zz492]

Nothing is final until it’s final. So here are some updates to give you guys idea what’s on the list for V1.2:

- 1mm depth increase, 133x217x331mm
- one piece Front Frame for better color control and match with Top/Bottom Panels
- recessed Front Frame canvas for two-tone and other creative possibilities
- 1.25, 1.5, 1.75, 2, 2.25, 2.5, 2.75 and 3 GPU Slot space allocation on *single Rear IO Plate for finessed GPU space optimization on less parts
- dual 240 radiator / AIO cooler support on 1.25 GPU Slot with *single slot WC GPU.
- vertical stand upgrade kit for less desktop foot print
- recess cutouts for magnets, for holding Mesh Side Panel or Tempered Glass Side Panel in place during disassembly
- support for 320mm long GPU like ROG Nvidia 30XX and AMD 6XXX (MSI Gaming X Trio and Suprim X not supported, 5mm too long)

Is it possible to fit a ekwb 3080 ftw3 or strix waterblock?

 

[Wahaha360]

For those of us that cancelled our v1.1 orders for first dibs at v2.0, is that still the EVO or v1.2? I’d probably prefer the EVO, but I’m not sure without seeing more details on it.

We will offer *one priority slot, use either for V1.2 or V2.0