Production FormD T1 Classic (READ FIRST POST)

[OdinsPlayground]

Any status update on the December 1-4 Batch? Last we heard there was 40% left of this batch. Has more orders been dispatched? Will they continue to do so, or are we waiting until the production resumes with a new manufacturer before more of these orders are filled?

 

[Mao_Setzer]

Hi All, I have a small question.
Is it possible in 3 slot mode, to put the riser bracket in 2 slot mode, and if yes how ? I remember seeing that somewhere but Im not sure if I imagined it....

 

[AchromaticYYC]

@Wahaha360 Out of frustration I sent in a cancel request but have since come around and do not want it cancelled. Any way that can be looked at before it gets cancelled??? I have sent a please don’t cancel email as well lol
Please ?

thanks

 

[eedev]

Hi All, I have a small question.
Is it possible in 3 slot mode, to put the riser bracket in 2 slot mode, and if yes how ? I remember seeing that somewhere but Im not sure if I imagined it....

Yes

 

[NinoPecorino]

@Wahaha360 I saw the latest update about T1 2.0 on reddit, would be great to also have an official statement on the riser cable upgrade to PCI-E 4.0. Like are you targeting T1 2.0 or a later date/revision?

Check reddit

 

[biopunk]

@NinoPecorino that thread predates T1 2.0 announcement.
One of more recent statements:

We are planning to upgrade to PCIe 4.0 Riser around 2021Q2 Next year.

2.0 is planned for April, April is technically 2021Q2. So should we expect a 4.0 riser in T1 2.0?

 

[NinoPecorino]

i can't speak for w360 but i think he gave about as much info as he can on the subject.

 

[textkiller]

What are the additional expected changes for V2.0 over V1.1 compared to what you already listed? I think that'd affect some people's decision on whether to stick with V1.1 or wait for V2.0.

FormD email:
1. Support for taller (140mm) and longer (320mm) GPUs, like the Asus ROG Strix Nvidia 30XX and AMD 6X00/XT

2. Support for 2.5 and 2.75-slot GPU spacing, for more options on space allocation between the CPU/Motherboard and GPU

3. Support for an optional Vertical Stand Kit (v2 exclusive), to allow T1 to sit vertically on a desk

4. Simplification of various design elements to optimize for electrophoresis
——

I hope T1 2.0 have a little more space for a watercooled radiator but W360 said its outer dimention will not be changed.

 

[Asuka4Laifu]

I'm not wahaha but the P1 has support for bigger rads while only being slightly larger. Maybe look into waiting for that (nobody knows when it will release, safe to assume it's not coming before v2.0) or consider another bigger case if bigger rads are really that important.

 

[catzooka]

@textkiller, thank you for re-sharing the changes from the e-mail, but I intended to ask what changes were planned beyond that list, since @Wahaha360 was saying that he wouldn't chose V1.1 over V2.0. Maybe the better question: what features of V2.0 should make us consider cancelling a pending V1.1 order and wait for V2.0?

 

[MaZo]

Anyone else also got the same “Black, Silver, Titanium and Version 2.0” email again that was already sent on Friday?

 

[S2q]

30 series spread sheet says 60mm width card would fit but T1 specification says 59.2mm?

 

[Freshfrenchfries]

@textkiller, thank you for re-sharing the changes from the e-mail, but I intended to ask what changes were planned beyond that list, since @Wahaha360 was saying that he wouldn't chose V1.1 over V2.0. Maybe the better question: what features of V2.0 should make us consider cancelling a pending V1.1 order and wait for V2.0?

I would also like to know the answer to @catzooka's question, considering @Wahaha360 said, "there is no way I would personally choose V1.1 over V2.0, and I'm only half way done with the changes." The 2nd part of that quote is especially concerning if the V2.0 really is so close on the horizon given the updated timeline.

If we're happy with V1.1 part compatibility, don't want to use the vertical stand, and don't need 2.5/2.75-slot modes, what other V2.0 feature could make me resent the decision to keep my order after switching from gunmetal to titanium V1.1?

 

[Wahaha360]

Anyone else also got the same “Black, Silver, Titanium and Version 2.0” email again that was already sent on Friday?

Double reminder, in case some got caught in SPAM.

 

[Wahaha360]

@textkiller, thank you for re-sharing the changes from the e-mail, but I intended to ask what changes were planned beyond that list, since @Wahaha360 was saying that he wouldn't chose V1.1 over V2.0. Maybe the better question: what features of V2.0 should make us consider cancelling a pending V1.1 order and wait for V2.0?

I would also like to know the answer to @catzooka's question, considering @Wahaha360 said, "there is no way I would personally choose V1.1 over V2.0, and I'm only half way done with the changes." The 2nd part of that quote is especially concerning if the V2.0 really is so close on the horizon given the updated timeline.

If we're happy with V1.1 part compatibility, don't want to use the vertical stand, and don't need 2.5/2.75-slot modes, what other V2.0 feature could make me resent the decision to keep my order after switching from gunmetal to titanium V1.1?

Just wait and see.

 

[AP2]

Has anyone used the koolance HX-CU720V? I have don’t feel like taking apart the loop.

wonder it performs better than the tx240.

 

[thelaughingman]

Has anyone used the koolance HX-CU720V? I have don’t feel like taking apart the loop.

wonder it performs better than the tx240.

it's a 30mm thick rad with 30FPI, it should outperform the TX240 by a lot

 

[tinyitx]

it's a 30mm thick rad with 30FPI, it should outperform the TX240 by a lot

Koolance HX-CU720V's 360mm version is HX-CU1020V which beats EX360 (whose 35mm is thicker than TX240's 20.5mm even though the fpi is 18 vs 22).

Koolance HX-CU1020V 360mm Radiator Review - Page 6 of 6 - ExtremeRigs.net

Koolance HX-CU1020V 360mm Radiator Review - performance tested vs Hardware Labs Nemesis GTS, EK SE, Alphacool ST30, XSPC EX360, Magicool G2 Slim

www.xtremerigs.net

So, yes, it is quite safe to say HX-CU720V beats TX240 easily.

 

[biopunk]

it's a 30mm thick rad with 30FPI, it should outperform the TX240 by a lot

At 100% RPM with A12x25 - maybe but I doubt that 30 FPI rad will outperform 22FPI with low-static pressure thin fans when noise-normalized.

 

[Wahaha360]

...