Production FormD T1 Classic (READ FIRST POST)

[PKAWA]

I was wondering if the M.2 on the back of the motherboard can be the C drive?

 

[hetvler]

Check out this Legend’s detailed post on reddit (check the graph way down the bottom). I think adding the noctua A12x25 underneath makes a pretty significant difference. In Matt’s testing he targeted a 31C water temp with 20C ambient. With just 2 slim fans he had to run them at 1300RPM, with an extra noctua 25mm he could run them at 950RPM instead. Guesstimating I reckon that’s a 2-5C different in water temps when running at the same RPM. The A12x25 is just such a beast. Keep in mind his slim testing was done in pull, so you *might* get 1C gains on push.

I have 2 slims + noctua a12x25 on my tx240 and it keeps my 5700xt and 9700k well in check (~55C max with 22C ambient) at fairly quiet fan speeds (~1200RPM). With more powerful components expect higher temps.

Perfect, thank you.

 

[MaZo]

Long time lurker here anxiously waiting for my E-White T1 to arrive to go with a 5800X, 3080 FE, 16GB of Corsair 3600 C14 RAM, a PCIe 4.0 NVMe M2 drive, and a EK 240 AIO.

My case is part of the Dec 1-4 batch, however seems not to have been shipped yet. Any word on the shipping status?

 

[hetvler]

I remember a discussion about screws but I can't seem to find it (yes I used the search tool). Hoping to make my last amazon order for this build lol.

Any guidance on screws for the lt240 and 15mm fans? Or will the included screws work just fine?

 

[Protools]

Long time lurker here anxiously waiting for my E-White T1 to arrive to go with a 5800X, 3080 FE, 16GB of Corsair 3600 C14 RAM, a PCIe 4.0 NVMe M2 drive, and a EK 240 AIO.

My case is part of the Dec 1-4 batch, however seems not to have been shipped yet. Any word on the shipping status?

November 23-27th here, haven't got any mails.

 

[PKAWA]

I can only tell you that I ordered these https://www.aquatuning.nl/waterkoel.../schraube-iso-7380-fl-m3-x-37-hexagonal-black
And cut them to length with a Dremel.
They have a nice wide screwhead.

 

[rfarmer]

I remember a discussion about screws but I can't seem to find it (yes I used the search tool). Hoping to make my last amazon order for this build lol.

Any guidance on screws for the lt240 and 15mm fans? Or will the included screws work just fine?

I don't know if you can get them locally like I can but I just used M3 x 20mm.

 

[Navic]

I have not been able to find a 3M cable with the reverse connector for the GPU side.

It's low profile enough that it shouldn't cause problems, but you might have to have the fans on top of the radiator so they dont interfere with the riser.

 

[BSartist]

I already have A12x15 and A12x25 fans on the way for push configuration. Push come to shove, I'll just get the LINKUP cable, but that shipping cost is ridiculous.

On the screw topic, how is the radiator mounted to the case in the push fan configuration? I assume I'll need 4x #6-32 1.00" screws and some nylon washers for spacing to the motherboard (ASUS B550-I Strix)

While on the subject, what screws come with the T1? I may look into swapping out case screws for white torx if the price is right.

 

[Aguda33]

I remember a discussion about screws but I can't seem to find it (yes I used the search tool). Hoping to make my last amazon order for this build lol.

Any guidance on screws for the lt240 and 15mm fans? Or will the included screws work just fine?

I used these screws that I got from Amazon: Amazon.com: (10) M3-0.50 x 20mm - Button Head Socket Cap Screws ISO 7380 / DIN 9427 Class 12.9 Black Alloy Steel w Black Oxide - MonsterBolts (10, M3 x 20mm): Home Improvement

They have a hex head but worked well for me.

 

[CorruptCommanderAc]

November 23-27th here, haven't got any mails.

what the ...
They say Dec batch will ship on time, but seems it is not true as many people of Dec and Nov batch have not received any tracking no.

 

[Nykwil]

what the ...
They say Dec batch will ship on time, but seems it is not true as many people of Dec and Nov batch have not received any tracking no.

I'm on the Dec 1-4 batch and just received my shipping notification. Tracking number for my shipment through DHL wont happen until it's on the plane. So excited to get lost in my build soon.

 

[SquareCubedBox]

I'm on the Dec 1-4 batch and just received my shipping notification. Tracking number for my shipment through DHL wont happen until it's on the plane. So excited to get lost in my build soon.

Is this notification the "We are preparing to receive T1 from our manufacturer soon, and will start packaging and shipping based on the order received. To ensure a smooth delivery, PLEASE DOUBLE CHECK YOUR SHIPPING ADDRESS!" email?

I have been anxiously waiting for the Tracking Number, thinking that that was the shipping notification

 

[Nykwil]

Is this notification the "We are preparing to receive T1 from our manufacturer soon, and will start packaging and shipping based on the order received. To ensure a smooth delivery, PLEASE DOUBLE CHECK YOUR SHIPPING ADDRESS!" email?

I have been anxiously waiting for the Tracking Number, thinking that that was the shipping notification

Nope. This is the second notification of “your order is on the way” already received the initial email making sure shipping address is correct.

 

[CorruptCommanderAc]

Nope. This is the second notification of “your order is on the way” already received the initial email making sure shipping address is correct.

That's good news. I am also the same batch but not yet received the tracking number email, I hope I can receive it soon. So excited about the case since last week lol.

 

[SquareCubedBox]

Nope. This is the second notification of “your order is on the way” already received the initial email making sure shipping address is correct.

Great for you man! I hope it comes soon.
I'm also part of the Dec 1-4 batch but I still haven't received my "your order is on the way" email yet

Nevertheless, I'm still excited for it!

 

[dream3]

Anyone with the 20cm linkup cable can confirm the cable fits perfectly? I see they released a 18cm cable so I wonder if I should go with 20cm or 18cm which matches the original cable as far as I know.

 

[jouz]

Great for you man! I hope it comes soon.
I'm also part of the Dec 1-4 batch but I still haven't received my "your order is on the way" email yet

Nevertheless, I'm still excited for it!

same for me - I'm sure they're just working on it in batches, and it'll be our turn soon™

 

[ScubaSteve]

I'm on the Dec 1-4 batch and just received my shipping notification. Tracking number for my shipment through DHL wont happen until it's on the plane. So excited to get lost in my build soon.

What's the date and time you placed your order?

 

[jouz]

What's the date and time you placed your order?

(I know you didn't ask me, but I was about to ask the same here: for me it was September 19, 2020 10:18AM)