My motherboard only outputs 12W on the headers, is this causing problems, or is the pump just not working at full power?
I think my decision to watercool GPU only may be the right one for future GPU cooling solutions.
Problem is you are cooling only your CPU with that radiator. Here I’m cooling both CPU and GPU with one 240mm radiator
have anyone received any emails from support@formdworks.com in the past couple of days? asking because i cannot seem to receive any emails sent from @Wahaha360 even after him trying to do so for a couple of days now. could this be an email misconfiguration in Shopify or something else?
Patient, i know excuse for small team is not fair. But since not @Wahaha360 team alone to pack and checking QC, every mistake will be happen..
i have checked the spam folder and bin before your input. if you are not part of the team, please kindly let those who are in charge to answer and advice, thank you
I just meant that I was not the one being addressed in his comment, and I highly suspect DHL for damaging my package during transport because it was pretty dented when I received it.
But that doesn't mean I don't like an undamaged case, so I've decided to send him a pm like you suggested.
Hope it will get sorted soon.
I didn't suggest you, that Wahaha360 reply.. Probably you skip "PM Parts"
Hmm.. DHL doing this mistake? Probably since, card box only one and include the T1.
I just quote, not answer it
Last edited:
I'm sure you mean well so I'm not going to comment further but doing some more comprehensive reading would probably be good to grasp what I'm saying.
Yes I have the acrylic version and it's great. Zero issues with it. You won't with the brass either.
I did some measurements
(I aligned both cards using the pcie connector as a reference. I can't think of a better way.)
A tech website editor confirmed my measurements.
Assuming this is indeed what we can expect (seems fairly likely now) and assuming the power connectors aren't at the end but on the side (I don't see why we should assume any different) it should "fit" in the case but the issue is that second fan that would be choked against the backside of the PSU.
Any ideas as to how we could make this work? I was thinking of reversing the PSU so the fan points inward, that way the GPU fan points straight at the PSU fan that would pull the air and expel it either up or down depending on whether the PSU is flipped or not.
But is it a good idea to point hot air at a PSU? I have no idea what's considered safe for PSUs operating temp range but blowing hot air at it doesn't sound ideal.
I'm aware chances are AIB models won't have that weird fan configuration and will be the usual 3 fan setup but we don't have reliable info on that quite yet.
Not quite. The PCB of these cards are presumed to be a weird short shape with a triangle cut out. So it could be actually shorter with a waterblock than reference! This is likely, as the end if the card is finned front to back on the end with the back side fan.
Really, we’ll just have to wait due to the potential unorthodox nature of this card... co-processor, new power connector, odd pcb design...
I didn't suggest you, that Wahaha360 reply.. Probably you skip "PM Parts"
Hmm.. DHL doing this mistake? Probably since, card box only one and include the T1.
I just quote, not answer it
PLEASE stop trying to help. You don't have the answers and you are making things WORSE.
I am working with Wahaha360 and have a direct line to him.
I have asked you politely twice now.
@PKAWA I will bring this to his attention and see if he has seen the email. Did you include photos?
@deeeeeeeeee i will ask him to look out for your email too
Similar threads
