I cannot get this to post. I have a Corsair SF600 and a PowerColor Red Dragon 5700. The GPU has a 8 and 6 pin connector. I'm using two 6+2 cables and leaving the 2 pin off of the 6 pin connector. The mother board has power, the RAM LEDs are lighting up, the fan on the cooler is spinning. I've checked all the connections twice, took out the GPU and put it back in, and same with the RAM. I've used different cables for the monitor and tried different ports on the GPU. I do have 2 NVMe's. One is installed on the front slot and one on the back of the mobo. I've taken the one on the back out and still nothing.
Any help would be greatly appreciated.
Louque Ghost S1 V3
Rog Strix B450-i
Ryzen 5 3600
PowerColor Red Dragon 5700 non-xt
Corsair SF-600
Noctua NH-L9x65
G.Skill 3200 CL16 PC4 25600 (Model F4-3200C16D-16GTZR)
I have two Inland Premium NVMe M.2 2280 PCIe 3.0 x4
Any help would be greatly appreciated.
Louque Ghost S1 V3
Rog Strix B450-i
Ryzen 5 3600
PowerColor Red Dragon 5700 non-xt
Corsair SF-600
Noctua NH-L9x65
G.Skill 3200 CL16 PC4 25600 (Model F4-3200C16D-16GTZR)
I have two Inland Premium NVMe M.2 2280 PCIe 3.0 x4