Does this PSU have PCIe cables?

cleveland

Master of Cramming
Sep 8, 2016
455
240
The description says it only supports PSUs up to 150mm long but the Geeek one is 170mm. Can anyone confirm this? Thanks

170mm is the dimension of a standard ITX board. IF (and that's a pretty big "if") the case is absolutely tight lenght-wise, then you'll have a problem with geet PSU. Otherwise, you should be fine (and tight as well).
 

tinyitx

Shrink Ray Wielder
Jan 25, 2018
2,279
2,338
https://www.amazon.com/dp/B01N4IGM0O/?tag=theminutiae-20

I need a 500W flex ATX PSU. The other option I have is the one from Geeek (https://www.geeekstore.com/shop/custom-flex-atx-modular-psu/) but I think it might be too long for the K39 case that I have ordered. The description says it only supports PSUs up to 150mm long but the Geeek one is 170mm. Can anyone confirm this? Thanks.

The Q&A at the bottom of the link seems to give conflicting info. The top one says it does not have PCIe connector but then the 4th one says it has one PCIe 6+2.
And, reading further down to the customer's reviews, I only scan the first page and it seems that owners report there is no PCIe connector.
So, it is safer to bet there is none.

K39 can support up to a max of 170mm. So, if the Geeek is exactly 170mm, then it should fit.

Check the info in the link below for K39. The recommended length of PSU is 150 but it does support up to 170mm. In fact, the seller also sells a 400W modified modular Delta PSU as a package to go along with the K39 and that PSU is listed as 170mm long. And this PSU has a 6+2 PCIe connector shown in the pics.
https://world.taobao.com/item/571416909587.htm

If you want a 500W, the link below shows a 500W modified modular Delta PSU.
https://world.taobao.com/item/550586245256.htm
It is also 170mm long. The nice feature of this and the above 400W PSU is that the cables run upward from the PSU connectors, thus saving some precious space, length-wise.
 
Last edited: