GPU Does anyone know anything about this GPU cooler?

[chingi5]

So recently I was browsing the local parts shop and found a used mini itx chassis (Foxconn RS-233 to be exact)

I was very surprised because the price was 6(!) dollars. I rushed and bought it because of the price and then I was even more surprised because it came with a 250w tfx PSU that was in working order but I will probably replace that with a Seasonic ss300tfx unit because I don't really trust that FSP unit to power my 750 ti

That case supports mini itx mobos and only single slot half height GPUs. I have an MSI 750 ti low profile which is dual slot so I was wondering how to fit that GPU inside the case. After browsing again I found a Deepcool v50 single slot cooler

so I was wondering if that cooler would fit on the 750 ti and if so will it be able to cool it sufficiently.
If not, is there any way I can fit the card inside the case and cool it properly?
Possibly some modding if that's not too hard.
Thanks in advance for any help and excuse my English please, it's not my native language.

 

[thewizzard1]

Looks like a 10W cooler, maybe less... I'm assuming 50mm fan, right?
Your 750ti would hit thermal capacity without even gaming, I'd think.

 

[robbee]

Most modern Nvidia low profile coolers have a pretty awkward mounting hole pattern. It's something like 43mm x 21.5mm. I don't think there's aftermarket coolers that have that pattern.

Best chance would be to search for an old low profile Quardo card with the same hole pattern. They're not quiet though, but then again, nothing's quiet if you have to cool 75w in a single slot LP card.

 

[chingi5]

Most modern Nvidia low profile coolers have a pretty awkward mounting hole pattern. It's something like 43mm x 21.5mm. I don't think there's aftermarket coolers that have that pattern.

Best chance would be to search for an old low profile Quardo card with the same hole pattern. They're not quiet though, but then again, nothing's quiet if you have to cool 75w in a single slot LP card.

Well, my hopes for this 5 bucks case were too high I guess. It's not meant for my use. Thanks anyways.

 

[chingi5]

Looks like a 10W cooler, maybe less... I'm assuming 50mm fan, right?
Your 750ti would hit thermal capacity without even gaming, I'd think.

Yes, you are right, the fan is 50mm. Thank you for your answer

 

[Ceros_X]

Check out this thread, I'm working on making a 750Ti and 1050Ti single slot.. not LP but it might give you some ideas.

https://smallformfactor.net/forum/threads/custom-single-slot-cooler-on-1050ti.1800/

 

[chingi5]

Check out this thread, I'm working on making a 750Ti and 1050Ti single slot.. not LP but it might give you some ideas.

https://smallformfactor.net/forum/threads/custom-single-slot-cooler-on-1050ti.1800/

Thank you I'll check it out.

 

[Curiosity]

For the 750ti, look for coolers compatible with the Nvidia 6600. Iirc they share a mounting Patten.

 

[Ceros_X]

Are you talking about the 750Ti LP? The 6600 you mentioned uses 80mm mounting holes, the 750Ti (non LP) uses 43mmx43mm.

http://m.ebay.com/itm/NVIDIA-Club-G...eo-Card-Cooler-Cooling-Fan-80mm-/171745746659

For the 750ti, look for coolers compatible with the Nvidia 6600. Iirc they share a mounting Patten.

 

[Curiosity]

Are you talking about the 750Ti LP? The 6600 you mentioned uses 80mm mounting holes, the 750Ti (non LP) uses 43mmx43mm.

http://m.ebay.com/itm/NVIDIA-Club-G...eo-Card-Cooler-Cooling-Fan-80mm-/171745746659

Maybe I was thinking of 6xxx radeon cards or something, it's been a while once I was looking into this.(about 2 years)
I remember looking really hard to find an alpenfohn Peter ii since it was one of the few coolers that would fit the 750ti and was substantial.

I think Tom's hardware swapped the cooler on a 750ti for one from an AMD gpu at one point.

 

[Curiosity]

Here's a Tom's article where they DIY'd a single slot 750ti

And the one i mentioned where they put on a passive cooler
Hopefully what I've posted is of some use and in not just trashing up the thread.
Edit:
Looking at the PCB of the LP MSI I now realize none of what I posted is probably particularly useful. D:

 

[Ceros_X]

Here's a Tom's article where they DIY'd a single slot 750ti

And the one i mentioned where they put on a passive cooler
Hopefully what I've posted is of some use and in not just trashing up the thread.
Edit:
Looking at the PCB of the LP MSI I now realize none of what I posted is probably particularly useful. D:

I think I linked to both of those in my thread (linked a few pages above). The multi-GPU you posted above was pretty interesting, though!

 

[Curiosity]

I think I linked to both of those in my thread (linked a few pages above). The multi-GPU you posted above was pretty interesting, though!

So you did!
I'm guilty of not noticing, I probably should have read more of the threads before posting aha.
Maybe this is a lesson in not browsing the forums while I work!