CodeBeing

Chassis Packer
Original poster
Apr 19, 2019
13
1
Looking for the ULTIMATE and SMALLEST build I can complete in this A4-SFX that's coming out here at the end of April, shipping early May. Super excited and have been eyeing this case for a while now!

If you had UNLIMITED MONEY and wanted to build your dream gaming PC, what would you select to put in the case?

Here's my build (and want YOUR feedback on parts and what I'm missing):
2080ti
https://m.newegg.com/products/9SIAAZU8SX5634

9700k
https://m.newegg.com/products/N82E16819117958

ASRock Z390 PHANTOM GAMING-ITX/AC Motherboard
https://m.newegg.com/products/N82E16813157854

32gb ram:
https://m.newegg.com/products/N82E16820233871

No noctua heatsink makes me sad, but I hear this one is good (BUT WHERE DO I BUY IT?!?!):
https://m.newegg.com/products/13C-000U-00061?ampcf=1

Thermal grease:
https://m.newegg.com/products/9SIA4RE6M28090

PSU
https://m.newegg.com/products/N82E16817139155
 

UnknownBehemoth

Trash Compacter
Mar 27, 2019
49
19
Here's some (unreasonable :p) upgrades to that list:

CPU: 9900K (Setup Long Power Duration Limit to 95W)
Cooler: Asetek 645LT + Noctua NF-A9x14 PWM
PSU: Corsair SF750 + CableMod Custom Length PSU cables
 
  • Like
Reactions: CodeBeing

CodeBeing

Chassis Packer
Original poster
Apr 19, 2019
13
1
Here's some (unreasonable :p) upgrades to that list:

CPU: 9900K (Setup Long Power Duration Limit to 95W)
Cooler: Asetek 645LT + Noctua NF-A9x14 PWM
PSU: Corsair SF750 + CableMod Custom Length PSU cables

That cooler looks to only be $99. Not bad. It fits in the Dan case? Looks awesome!

$70 for a platinum over a gold PSU. Sold.

9900K is actually on sale right now at NewEgg, so again, sold.
 

CodeBeing

Chassis Packer
Original poster
Apr 19, 2019
13
1

DanT

Average Stuffer
Feb 6, 2018
59
19
For the ram, I would go for 3200mhz instead of 3000mhz with 10$ more.
https://www.amazon.com/gp/product/B016ORTNI2/?tag=theminutiae-20

For the CPU cooler, u can grab an Asetek 645LT bundles ( including Noctua NF-A9x14 PWM Fan, Thermal Grizzly Kryonaut High Performance Thermal Paste - 1g, screws and Asetek Retention Kit) for only £69.16 ~ 89.88$ with £19.28 ~ 25.06$ shipping fee, which total 114.94$ on OverclockersUK.
https://www.overclockers.co.uk/ocuk...-liquid-cooling-upgrade-bundle-bu-0d4-tl.html

Got mine within 2 days.

Also, get one more Noctua NF-A9x14 PWM Fan for under the motherboard.

Order custom sleeve cables on Pslatecustoms, for precise measurement and the aesthetic look on ur pc.
https://www.pslatecustoms.com/

Phil will open pre-ordering on April 30 or May 1.
Cheers.
 
Last edited:
  • Like
Reactions: CodeBeing

CodeBeing

Chassis Packer
Original poster
Apr 19, 2019
13
1
For the ram, I would go for 3200mhz instead of 3000mhz with 10$ more.
https://www.amazon.com/gp/product/B016ORTNI2/?tag=theminutiae-20

For the CPU cooler, u can grab an Asetek 645LT bundles ( including Noctua NF-A9x14 PWM Fan, Thermal Grizzly Kryonaut High Performance Thermal Paste - 1g, screws and Asetek Retention Kit) for only £69.16 ~ 89.88$ with £19.28 ~ 25.06$ shipping fee, which total 114.94$ on OverclockersUK.
https://www.overclockers.co.uk/ocuk...-liquid-cooling-upgrade-bundle-bu-0d4-tl.html

Got mine within 2 days.

Also, get one more Noctua NF-A9x14 PWM Fan for under the motherboard.

Order custom sleeve cables on Pslatecustoms, for precise measurement and the aesthetic look on ur pc.
https://www.pslatecustoms.com/

Phil will open pre-ordering on April 30 or May 1.
Cheers.

$10 more on the RAM but the timings and CAS latency look worse for some reason. Seems odd for 3200mhz vs 3000mhz RAM.

Grabbing that cooler bundle before it sells out! I'm SUPER impressed it comes with the thermal grease I want AND a Noctua fan! Awesome! That cooler was an excellent suggestion by a couple people now. Happy to have liquid cooling once again in my system.

Custom cables look awesome. Thanks! What is the length of the PSU cable? 300mm? What other cables should I grab? I see a LOT of options.
 

DanT

Average Stuffer
Feb 6, 2018
59
19
$10 more on the RAM but the timings and CAS latency look worse for some reason. Seems odd for 3200mhz vs 3000mhz RAM.

Grabbing that cooler bundle before it sells out! I'm SUPER impressed it comes with the thermal grease I want AND a Noctua fan! Awesome! That cooler was an excellent suggestion by a couple people now. Happy to have liquid cooling once again in my system.

Custom cables look awesome. Thanks! What is the length of the PSU cable? 300mm? What other cables should I grab? I see a LOT of options.
Actually, you don't need to measure the length of the cables because they already did that for you. During the process to order and pick a color to configure, just let them know what power supply model, motherboard model and the graphics card that you have. *Let them know if you use the Asetek AIO CPU cooler.

There are sections under "Custom Sleeved Cables," go for the case that you have.
Dan A4-SFX: https://www.pslatecustoms.com/collections/dan-a4-sfx

Based on your parts list.
1x 24 Pin Paracord Custom Sleeved Cable
1x 8/4+4 Pin CPU/EPS Paracord Custom Sleeved Cable
2x 8/6+2 Pin PCI-E pARACORD Custom Sleeved Cable
Since you go with NVMe Samsung Plus+ 970 no need for the SATA cable.

Subscribe to the email notification to know when the store is open. I suggest selecting your custom color of choice now, and order right after it open to avoid being charged extra for high demand fee, since lots of people order them.

Hope this help.
 
Last edited:
  • Like
Reactions: CodeBeing

CodeBeing

Chassis Packer
Original poster
Apr 19, 2019
13
1
This forum has been SUPER helpful! Appreciate everyone!

Last question, as I'm nearing the purchasing mark (I've only bought the CPU cooler combo from Overclockers UK so far).

Looks like I need to buy a blower fan-type 2080Ti as this case is so small (which is AWESOME) that the heat must be ejected out the back.

I'm leaning towards the Gigabyte card, but CANNOT find the Aorus version ANYWHERE:
https://www.gigabyte.com/us/Graphics-Card/GV-N208TAORUS-T-11GC#kf

All I find is this one:
https://www.newegg.com/Product/Product.aspx?Item=9SIAAZU97J2650

Anyone recommend a blower card for a Dan case? Or...better question...which 2080Ti would you recommend for the Dan A4-SFX case?
 

fabio

Shrink Ray Wielder
Apr 6, 2016
1,885
4,325
This forum has been SUPER helpful! Appreciate everyone!

Last question, as I'm nearing the purchasing mark (I've only bought the CPU cooler combo from Overclockers UK so far).

Looks like I need to buy a blower fan-type 2080Ti as this case is so small (which is AWESOME) that the heat must be ejected out the back.

I'm leaning towards the Gigabyte card, but CANNOT find the Aorus version ANYWHERE:
https://www.gigabyte.com/us/Graphics-Card/GV-N208TAORUS-T-11GC#kf

All I find is this one:
https://www.newegg.com/Product/Product.aspx?Item=9SIAAZU97J2650

Anyone recommend a blower card for a Dan case? Or...better question...which 2080Ti would you recommend for the Dan A4-SFX case?
The Aourus I had was super noisy! Way more than the reference Nvidia 10x0 series blower type

Maybe try the Asus!
 
  • Like
Reactions: CodeBeing

Desertf0x9

SFF Lingo Aficionado
Oct 13, 2018
101
50
The ASUS turbo is stupid loud as well. It’s what I have. I’m pretty sure all these blower styles are all loud. Stock fan curve is terrible basically throttles down but I set the fan to 60% which is still extremely loud but keeps temps at 75 degrees even when overclocked.
 
  • Like
Reactions: CodeBeing

CodeBeing

Chassis Packer
Original poster
Apr 19, 2019
13
1
The ASUS turbo is stupid loud as well. It’s what I have. I’m pretty sure all these blower styles are all loud. Stock fan curve is terrible basically throttles down but I set the fan to 60% which is still extremely loud but keeps temps at 75 degrees even when overclocked.

Dang. I was NOT hoping for a loud system. With a water cooler in there and Noctua fans...I expect silence.

Is there a listing of 2080Ti cards that FIT in the Dan A4-SFX?

I see on the Dan A4-SFX site, it states:
"Rear exhaust cards are recommended.

Maximum card length: 306mm (including the PCI bracket); 295mm (discluding the PCI bracket)
Maximum card width: 45mm (including a backplate); 40mm (discluding a backplate)
Maximum card height: 144mm (as measured from the bottom of the PCI slot)"

I looked here...and sorted by SIZE on the bottom table (and understood "rear exhaust cards" to mean "blower" models):
https://thepcenthusiast.com/geforce-rtx-2080-ti-compared-best-rtx-2080-ti/

SUPER tempted just to get a dual-fan EVGA model (had luck with that brand so far and run a 1080Ti currently) that is 2 slot and appears to fit, based on the site specs:
https://www.newegg.com/Product/Product.aspx?Item=N82E16814487402
 

DanT

Average Stuffer
Feb 6, 2018
59
19
Dang. I was NOT hoping for a loud system. With a water cooler in there and Noctua fans...I expect silence.

Is there a listing of 2080Ti cards that FIT in the Dan A4-SFX?

I see on the Dan A4-SFX site, it states:
"Rear exhaust cards are recommended.

Maximum card length: 306mm (including the PCI bracket); 295mm (discluding the PCI bracket)
Maximum card width: 45mm (including a backplate); 40mm (discluding a backplate)
Maximum card height: 144mm (as measured from the bottom of the PCI slot)"

I looked here...and sorted by SIZE on the bottom table (and understood "rear exhaust cards" to mean "blower" models):
https://thepcenthusiast.com/geforce-rtx-2080-ti-compared-best-rtx-2080-ti/

SUPER tempted just to get a dual-fan EVGA model (had luck with that brand so far and run a 1080Ti currently) that is 2 slot and appears to fit, based on the site specs:
https://www.newegg.com/Product/Product.aspx?Item=N82E16814487402
I suggest go for RTX 2080 or RTX 2070 if you want a silent system. Most of a dual slot RTX 2080 ti ran quite hot and require high rpm fan speed in Dan A4-SFX.

Listing of GPUs that fit in Dan A4-SFX.
Here is the RTX 2080 & RTX 2080 Ti compatibility list:

RTX 2080 Ti Cards:

NVIDIA GeForce RTX 2080 Ti Founders Edition = compatible

ASUS Dual GeForce RTX 2080 Ti Advanced = incompatible (3 Slot)
ASUS Dual GeForce RTX 2080 Ti OC = incompatible (2.5 Slot)

ASUS Turbo GeForce RTX 2080 Ti = compatible

EVGA GeForce RTX 2080 Ti XC Gaming = compatible
EVGA GeForce RTX 2080 Ti XC Ultra Gaming = incompatible (3 Slot)

Gainward GeForce RTX 2080 Ti Phoenix GS = incompatible (3 Slot)
Gainward GeForce RTX 2080 Ti Phoenix = incompatible (3 Slot)


Gigabyte GeForce RTX 2080 Ti Gaming OC 11G = incompatible (2.5 Slot)
Gigabyte GeForce RTX 2080 Ti Windforce OC 11G = compatible

INNO3D GeForce RTX 2080 Ti Gaming OC X3 = compatible
INNO3D GeForce RTX 2080 Ti X2 OC = compatible


KFA² GeForce RTX 2080 Ti OC = compatible

MSI GeForce RTX 2080 Ti Duke 11G OC = incompatible (2.5 Slot)
MSI GeForce RTX 2080 Ti Gaming X Trio = incompatible (3 Slot)


Palit GeForce RTX 2080 Ti GamingPro OC = incompatible (3 Slot)
Palit GeForce RTX 2080 Ti GamingPro = incompatible (3 Slot)


PNY GeForce RTX 2080 Ti Blower Design = compatible
PNY GeForce RTX 2080 Ti XLR8 Gaming Overclocked = compatible


Zotac Gaming GeForce RTX 2080 Ti AMP Edition = incompatible (3 Slot)
Zotac Gaming GeForce RTX 2080 Ti Triple Fan = incompatible (3 Slot)



RTX 2080 Cards:

NVIDIA GeForce RTX 2080 Ti Founders Edition = compatible

ASUS Dual GeForce RTX 2080 OC = incompatible (3 Slot)
ASUS ROG Strix GeForce RTX 2080 OC = incompatible (2 Slot)


EVGA GeForce RTX 2080 XC Gaming = compatible
EVGA GeForce RTX 2080 XC Ultra Gaming = incompatible (3 Slot)

Gainward GeForce RTX 2080 Phoenix GS = compatible
Gainward GeForce RTX 2080 Phoenix = compatible


Gigabyte GeForce RTX 2080 Gaming OC 8G = incompatible (2.5 Slot)
Gigabyte GeForce RTX 2080 Windforce OC 8G = compatible

INNO3D GeForce RTX 2080 Gaming OC X3 = compatible
INNO3D GeForce RTX 2080 Jet = compatible
INNO3D GeForce RTX 2080 X2 OC = compatible


KFA² GeForce RTX 2080 OC = compatible

MSI GeForce RTX 2080 Duke 8G OC = incompatible (2.5 Slot)
MSI GeForce RTX 2080 Gaming X Trio = incompatible (3 Slot)

MSI GeForce RTX 2080 Sea Hawk X = unknow
MSI GeForce RTX 2080 Ventus 8G OC = unknow

Palit GeForce RTX 2080 GamingPro OC = compatible
Palit GeForce RTX 2080 GamingPro = compatible


PNY GeForce RTX 2080 Blower Design = compatible
PNY GeForce RTX 2080 XLR8 Gaming OC Triple Fan = compatible
PNY GeForce RTX 2080 XLR8 Gaming OC Twin Fan = compatible


Zotac Gaming GeForce RTX 2080 AMP Edition = incompatible (3 Slot)
Zotac Gaming GeForce RTX 2080 Blower = compatible
 
  • Like
Reactions: CodeBeing

CodeBeing

Chassis Packer
Original poster
Apr 19, 2019
13
1
I suggest go for RTX 2080 or RTX 2070 if you want a silent system. Most of a dual slot RTX 2080 ti ran quite hot and require high rpm fan speed in Dan A4-SFX.

Listing of GPUs that fit in Dan A4-SFX.

I'd save $430 by going with the non-Ti 2080...and if it does mean MUCH QUIETER, I'd rather do that. I'm examining benchmarks on the 2080Ti vs 2080 and they seem decently close.

Thanks for the input!

I did order the case, the motherboard, power supply and RAM. I'm going to wait on CPU, SSD and video card to see if prices go down here in a week or so, since the Dan case isn't set to ship until May 3rd.
 

DanT

Average Stuffer
Feb 6, 2018
59
19
I'd save $430 by going with the non-Ti 2080...and if it does mean MUCH QUIETER, I'd rather do that. I'm examining benchmarks on the 2080Ti vs 2080 and they seem decently close.

Thanks for the input!

I did order the case, the motherboard, power supply and RAM. I'm going to wait on CPU, SSD and video card to see if prices go down here in a week or so, since the Dan case isn't set to ship until May 3rd.
FYI, 9900k pricing drop about 30-40$ since last week. Just go for RTX 2080, even Dan recommended it. Avoid buying FE card, mine RTX 2080 sound like jet engine with 70% fan speed in my Dan A4 v3.
 
  • Like
Reactions: CodeBeing

Hellow

Cable-Tie Ninja
Mar 7, 2019
158
27
You can choose only 2 things of this list :
- Small
- Performance
- Silence

You choose Small & Performance, so be ready to have a Noisy system.
 
  • Like
Reactions: CodeBeing