Production COOJ SF3 8.9L A4-Structure Aluminum case
- Thread starter COOJ
- Start date
Really really nice case for the size and price. I got the gray and may get the WC edition in black.
Damn, it's gorgeous. Basically the design and layout i've dreamed of for years. Can't wait until i receive mine... I ordered mine in black, but could have gone with the grey no problem.Cooj SF3 in Gray:
Guys, i have been out of this for a long time. "Unfortunately" i bought a GPU before i saw this and now maybe it's to big and i need your expertise to know if it is too big or if it fits.
The GPU in question is this one:
Dimensions
312 x 130 x 50 mm
12.3 x 5.1 x 2.0 inch
Is this with the baffle or without? I tried to measure and it seems that 312 is the lenght of the "plastic" top.
The GPU in question is this one:
Dimensions
312 x 130 x 50 mm
12.3 x 5.1 x 2.0 inch
Is this with the baffle or without? I tried to measure and it seems that 312 is the lenght of the "plastic" top.
The maximum length without the bracket/baffle is 307mm, so don't think it will fit. I don't own the case, but I assume there isn't 5mm of slack but maybe someone else or @COOJ can confirm.
Yes that's what i was expecting. Thank for you input @coughlanio . What a shame, wanted a nice Xmas present 
Received mine yesterday and already brought in the insides of my previous case, the Zalman M2 Mini, which shares the same layout but its bigger and only holds a single 80mm on top.
Mine came in perfect condition, i purchased it in Black and i'm in love with the stealth-y look.
Mine came in perfect condition, i purchased it in Black and i'm in love with the stealth-y look.
Last edited:
Here you have some pictures of the build, sadly i didn't take any before starting:
Added some LED strips:
Overall, i think they nailed a masterpiece with the SF3, I can't think of any competitor for this case for air cooling builds below $200.
Measuring 8.9L with standard ITX components, two top, well vented 12015 fans, 2.5 slots GPU, easy to build in (in comparison with many others sandwich style cases), good side mesh panels, superb build quality and under $100... (sure, you may have to add the riser, but in my case I already had one).
My only grip with the SF3 is that the spine/middle tray seems to be in place by a notch/indent, to me it doesnt feel "secured" or sturdy enough, the motherboard itself has a little wiggle of about 1-2mm if you move it.
Everything else, is top notch. Most of the competition have worse disadvantages than this one while costing the double if not more.
Feel free to ask if you have any specific question.
Last edited:
Wholeheartedly agree on the spine, albeit my case arrived damaged in shipping, the spine wasn't set in place when it arrived. It also leaves marks against the inside of the front of the case when it's set back in place, I just hope the replacement isn't like this.Here you have some pictures of the build, sadly i didn't take any before starting:
Added some LED strips:
Overall, i think they nailed a masterpiece with the SF3, I can't think of any competitor for this case for air cooling builds below $200.
Measuring 8.9L with standard ITX components, two top, well vented 12015 fans, 2.5 slots GPU, easy to build in (in comparison with many others sandwich style cases), good side mesh panels, superb build quality and under $100... (sure, you may have to add the riser, but in my case I already had one).
My only grip with the SF3 is that the spine/middle tray seems to be in place by a notch/indent, to me it doesnt feel "secured" or sturdy enough, the motherboard itself has a little wiggle of about 1-2mm if you move it.
Everything else, is top notch. Most of the competition have worse disadvantages than this one while costing the double if not more.
Feel free to ask if you have any specific question.
https://postimg.cc/PvxsTn5q
Riveting it to the front would have been better, but nit picks aside, it's a gorgeous case! I just wish it was packaged better like the Z-13 too.
Similar threads
