Thanks! Swiftech is sadly near impossible to find here in Sweden, but I actually hadn't spotted that Barrow made DDC pumps, so I'll likely get one of those. Those prices are too good to pass by.
-
Save 15% on ALL SFF Network merch, until Dec 31st! Use code SFF2024 at checkout. Click here!
Production Aquanaut Basic/Extreme - Ultra Low Profile CPU Block & Pump Mount Combo
- Thread starter Nouvolo
- Start date
I found this regarding the different DDC pump versions: https://hw-lab.com/summary-of-laing-ddc-pumps.html
Be very carefull with DDC rewiring to use a fan header as power, my B450i only provides 1A on the CPU Header, and not 2A like on the Fan header.
Be very carefull with DDC rewiring to use a fan header as power, my B450i only provides 1A on the CPU Header, and not 2A like on the Fan header.
... did I say there was a problem with those? I was asking which versions people would recommend, the post I then responded to mentioned Swiftech and Barrow. Thus that is what I wrote about. The PWM versions of Laing's own-branded pumps (at least the ones I've found) are far more expensive than the Barrow though. Close to 2x the price. Which makes the Barrow well worth a try.
Yeah, those are nice. I'm thinking of ordering this though, as that mini-res top might come in handy for some future project.
Aquanaut is now officially launched and available
www.nouvolo.com
Nouvolo Aquanaut - Ultra Low Profile CPU Block & Pump Mount Combo
Aquanaut is an ultra low profile CPU block & pump mount combo optimized for space saving, clean and minimalist custom loop builds. It mounts on top of the CPU serving as a CPU water block as well as a (DDC) pump mount. It includes cold plate with micro channel fins for guided water flow and...
www.nouvolo.com
Fill in your shipping address as normal, then pick country as Germany. Then DM me what order number, and I will change back to Sweden. I may later open up SWE for public (with higher shipping cost) but I need to assess the shipping cost... It may cost more than other EU countries (from HK), due to less cargoes
Order placed, and an official thank you to @Nouvolo for being very helpful 
Guess I had amazing timing refreshing the site at just the time orders went live
Guess I had amazing timing refreshing the site at just the time orders went live Yeah, I've looked at those, and I'm still considering whether to splurge on an original (around 900 SEK) or go for the Barrow (around 500 SEK). The price of the Barrow makes it mighty tempting, but I have no doubt the quality is worse. Noise is my main concern.
Just did a test fit on my ASRock Z490M -ITX/AC LGA1200 (10th Gen) motherboard.
Block nicely clears the VRM's, etc., no issues whatsoever!
Block nicely clears the VRM's, etc., no issues whatsoever!
Order placed, and an official thank you to @Nouvolo for being very helpful
Yeah, I've looked at those, and I'm still considering whether to splurge on an original (around 900 SEK) or go for the Barrow (around 500 SEK). The price of the Barrow makes it mighty tempting, but I have no doubt the quality is worse. Noise is my main concern.
Nothing wrong with going with the proven pump even if it is more expensive. You know that you are getting quality product. If anything, I would not cheap out on the pump.
Oh, absolutely, pumps are quite well known to fail after all. I currently have one AliExpress shopping cart open with a barrow pump + 240mm rad + some fittings, and one at aquatuning.se with an Aquacomputer Quadro, Laing DDC-1T Plus PWM and a 280mm Alphacool rad. The price difference for the parts available at both is nearly 2x, but ... I'm still not quite sure. I want the 280, but fitting it in the side of the NR200 might be more of a challenge than I really want (and even the 240 will be an improvement as it will be replacing a 120 in my current loop). Then again I need both the Quadro and the Barrow fittings, so I need to order something from both places. Decisions, decisions.
For res i chose this this. The reservoir will be secured behind the radiator. The radiator will be installed behind the body on a special frame. I am still waiting to receive all the parts of my future build. In the meantime, I only have this. In the last photo the rad frame is waiting for painting.
Last edited:
Similar threads
